Absima CR4S V2 2.4Ghz Radio System

1. Įvadas

Ačiū, kad pirkoteasing the Absima CR4S V2 2.4Ghz Radio System. This 4-channel pistol grip remote control system is designed for reliable and precise operation of your remote-controlled vehicles. It features a robust design and includes a "beginner mode" for ease of use, making it suitable for users of all experience levels.

2. Saugos priemonės

• Visada vairuokite savo nuotoliniu būdu valdomą transporto priemonę saugiai ir atsakingai.
• Ensure batteries are correctly installed and charged before use.
• Do not expose the radio system to water or extreme temperatures.
• Keep the system away from small children to prevent accidental ingestion of small parts.
• Turn off the receiver first, then the transmitter, when finished operating. Turn on the transmitter first, then the receiver, when starting operation.

3. Pakuotės turinys

The Absima CR4S V2 2.4Ghz Radio System package includes the following components:

• Absima CR4S V2 2.4Ghz Transmitter (TX)
• Absima 2.4Ghz Receiver (RX)

4. Produktas baigtasview

Familiarize yourself with the main components of your Absima CR4S V2 radio system.

Figure 4.1: Absima CR4S V2 Transmitter (left) and Receiver (right).

4.2 pav. Išsamus view of the Absima CR4S V2 Transmitter's control panel, showing various adjustment knobs and switches.

4.1 siųstuvas (TX)

• Vairas: Controls the left and right steering of the vehicle.
• Droselio gaidukas: Controls forward and reverse movement. Pull for forward, push for reverse/brake.
• CH3/CH4 Buttons/Switches: Auxiliary channels for controlling additional functions on your vehicle (e.g., lights, winches), if supported.
• Apdailos reguliavimas: Dials or sliders for fine-tuning steering and throttle neutral positions.
• Maitinimo jungiklis: Įjungia/išjungia siųstuvą.
• Baterijų skyrius: Located at the bottom of the handle, for installing alkaline batteries.

4.2 imtuvas (RX)

• Antena: Receives signals from the transmitter. Ensure it is properly positioned.
• Channel Ports: Connectors for steering servo, throttle ESC, and auxiliary channels (CH3, CH4).
• Susiejimo mygtukas: Used to pair the receiver with the transmitter.

5. Sąranka

5.1 Siųstuvo baterijos įdėjimas

1. Locate the battery compartment cover on the bottom of the transmitter handle.
2. Atidarykite dangtelį.
3. Insert the required alkaline batteries (not included) according to the polarity markings (+/-).
4. Saugiai uždarykite akumuliatoriaus skyriaus dangtelį.

5.2 Imtuvo įrengimas ir prijungimas

1. Mount the receiver securely in your RC vehicle, away from electrical interference.
2. Connect the steering servo to the "CH1" port on the receiver.
3. Connect the Electronic Speed Controller (ESC) to the "CH2" port on the receiver.
4. Connect any auxiliary components (e.g., lights) to "CH3" or "CH4" ports as needed.
5. Ensure the receiver antenna is extended and positioned correctly for optimal signal reception.

5.3 Siųstuvo ir imtuvo susiejimas

Susiejimas yra siųstuvo ir imtuvo sujungimo procesas, kad jie bendrautų išskirtinai vienas su kitu.

1. Įsitikinkite, kad siųstuvas yra IŠJUNGTAS.
2. Connect a bind plug (if supplied with your vehicle's ESC or receiver) to the "BIND" port on the receiver.
3. Power on the RC vehicle (which powers the receiver). The receiver's LED should flash, indicating it's in bind mode.
4. While holding down the bind button on the transmitter (refer to transmitter diagram for location), turn on the transmitter.
5. Release the bind button on the transmitter once its LED indicates a successful connection (usually a solid light).
6. Turn off the receiver, then the transmitter.
7. Ištraukite surišimo kištuką iš imtuvo.
8. Turn on the transmitter first, then the receiver. The receiver's LED should now be solid, indicating a successful bind.

6. Operacinis

6.1 Įjungimo / išjungimo seka

• Norėdami įjungti: Turn on the transmitter first, then power on your RC vehicle (receiver).
• Norėdami išjungti: Power off your RC vehicle (receiver) first, then turn off the transmitter.

6.2 Pagrindiniai valdikliai

• Vairavimas: Norėdami valdyti transporto priemonės kryptį, pasukite vairą į kairę arba į dešinę.
• Droselis: Pull the trigger towards you for forward movement. Push the trigger away from you for reverse or braking.
• Auxiliary Channels (CH3/CH4): Use the corresponding buttons or switches on the transmitter to activate functions connected to these channels on your vehicle.

6.3 Pradedančiųjų režimas

The Absima CR4S V2 features a "beginner mode" which limits the maximum throttle output, making the vehicle easier to control for new users or children. Refer to your transmitter's specific controls for activating and deactivating this mode. This mode helps in learning to drive without overwhelming power.

7. Priežiūra

• Keep the transmitter and receiver clean and free from dust and dirt. Use a soft, dry cloth for cleaning.
• Avoid exposing the system to direct sunlight or high humidity for extended periods.
• Jei ilgesnį laiką nenaudosite siųstuvo, išimkite iš jo baterijas, kad išvengtumėte elektrolito nuotėkio.
• Regularly check all connections for security and wear.

8. Problemų sprendimas

9. Specifikacijos

• Modelio numeris: 2000010
• Kanalai: 4
• Dažnis: 2.4 GHz
• Siųstuvo matmenys: Apytiksliai 9 x 2 x 36 cm
• Svoris: Approximately 130 g (Transmitter only, without batteries)
• Medžiaga: Plastikiniai
• Spalva: Juoda
• Batteries Required (Transmitter): Yes (Alkaline, not included)
• Reikalingas surinkimas: Nr

10. Garantija

Absima products are manufactured to high quality standards. This product is covered by a manufacturer's warranty against defects in materials and workmanship. Please retain your proof of purchase for warranty claims. For specific warranty terms and conditions, refer to the documentation provided with your purchase or visit the official Absima websvetainę.

11. Parama

For technical assistance, troubleshooting, or spare parts inquiries, please contact your local Absima dealer or visit the official Absima support website. Online resources, FAQs, and contact information can typically be found there.