Svarbi saugos informacija
Please read this instruction manual carefully before installing or operating your Brilliant Dody Outdoor Wall Light. Keep this manual for future reference. Improper installation or use can lead to electric shock, fire, or other hazards.
- Prieš montuodami, atlikdami techninę priežiūrą ar keisdami lemputę, įsitikinkite, kad maitinimo šaltinis yra atjungtas.
- Jei nesate tikri dėl elektros instaliacijos, montavimą turėtų atlikti kvalifikuotas elektrikas.
- This product is designed for outdoor use with an IP44 rating, providing protection against splashing water.
- Neviršykite didžiausios galiostage nurodyta lemputei.
Pakuotės turinys
Prieš pradėdami diegti, patikrinkite, ar yra visi komponentai:
- 1 x Brilliant Dody Outdoor Wall Light fixture
- Tvirtinimo medžiagos (varžtai, sieniniai kaiščiai)
- Instrukcijų vadovas
Pastaba: E27 lemputė į komplektą neįeina ir turi būti įsigyta atskirai.
Sąranka ir diegimas
- Paruoškite montavimo vietą: Choose a suitable wall location for mounting. The recommended mounting height for optimal motion detection is 1.8 meters. Ensure the power supply to the installation area is switched off at the main circuit breaker.
- Gręžimo taškų žymėjimas: Hold the light fixture against the wall at the desired mounting height. Mark the positions for the drilling holes using a pencil.
- Gręžimo skylės: Išgręžkite skyles pažymėtose vietose. Į išgręžtas skyles įkiškite pateiktus sieninius kaiščius.
- Prijunkite laidus: Carefully connect the electrical wires from your mains supply to the terminal block inside the light fixture. Ensure correct polarity (Live, Neutral, Earth). If you are unsure, consult a qualified electrician.
- Sumontuokite armatūrą: Secure the light fixture to the wall using the provided screws. Ensure it is firmly attached.
- Įdiekite lemputę: Insert an E27 bulb (max 20W, LED compatible) into the lamp holder. Ensure the bulb is securely screwed in.
Vaizdas: priekis view of the Brilliant Dody Outdoor Wall Light, showing its sleek black and white design. This image illustrates the overall appearance of the fixture before installation.
Image: Close-up of the top section of the Brilliant Dody Outdoor Wall Light, highlighting the white diffuser and black trim. This view helps in understanding the bulb housing area.
Naudojimo instrukcijos
The Brilliant Dody Outdoor Wall Light features an integrated motion detector for automatic operation. After installation, restore power to the fixture.
Motion Detector Settings:
The motion sensor has adjustable settings for 'TIME' and 'LUX'. These controls are typically located on the sensor unit itself.
Vaizdas: Išsamus view of the motion sensor and its adjustment dials (TIME and LUX) on the Brilliant Dody Outdoor Wall Light. This image shows where to find and adjust the sensor settings.
- LAIKAS: This dial controls how long the light remains on after motion is detected and no further motion is sensed. Rotate the dial to increase or decrease the duration.
- LUX: This dial determines the ambient light level at which the sensor becomes active. Rotate towards the sun icon for the sensor to activate in brighter conditions (daytime), or towards the moon icon for it to activate only in darker conditions (nighttime).
Aptikimo sritis:
- Aptikimo kampas: 120°
- Aptikimo diapazonas: Up to 8 meters on both sides, with a maximum detection range of 10 meters.
- Optimalus montavimo aukštis: 1.8 meters for best performance.
Priežiūra
- Valymas: To clean the fixture, ensure the power is off. Wipe with a soft, damp cloth. Do not use abrasive cleaners or solvents, as these can damage the stainless steel finish or plastic diffuser.
- Lemputės keitimas: Before replacing the bulb, ensure the power supply is disconnected. Allow the old bulb to cool down completely. Unscrew the old E27 bulb and replace it with a new E27 bulb (max 20W, LED compatible).
- Patikra: Reguliariai tikrinkite armatūrą, ar nėra pažeidimų, atsilaisvinusių jungčių ar susidėvėjimo požymių.
Trikčių šalinimas
| Problema | Galima priežastis | Sprendimas |
|---|---|---|
| Šviesa neįsijungia. | Nėra maitinimo. Sugedusi lemputė. Incorrect LUX setting. | Patikrinkite grandinės pertraukiklį. Pakeiskite lemputę. Adjust LUX dial towards the moon icon for darker conditions. |
| Šviesa dega nuolat. | Aptiktas nuolatinis judesys. Incorrect TIME setting. | Ensure no objects are constantly moving in the detection zone. Nustatykite TIME ratuką į trumpesnę trukmę. |
| Judesio jutiklis neaptinka. | Kliūtis aptikimo kelyje. Incorrect LUX setting. Nešvarus jutiklis. | Pašalinkite visas kliūtis. Adjust LUX dial towards the sun icon for brighter conditions, or ensure it's not set too low for current ambient light. Clean the sensor lens gently. |
Gaminio specifikacijos
- Prekinis ženklas: Puikus
- Modelio numeris: 1000134854
- ASIN: B0B11KYHSW
- Matmenys (P x P x A): 17 x 7.6 x 40 cm
- Svoris: 490 gramų
- Medžiaga: Nerūdijantis plienas
- Atspalvio medžiaga: Plastikiniai
- Spalva: Juoda
- Lemputės tipas: E27 (lemputė neįskaičiuota)
- Maksas Vatastage: 20W (LED compatible)
- Lempučių skaičius: 1
- Maitinimo šaltinis: Elektros kabelis
- Diegimo tipas: Sieninis laikiklis
- Ypatinga funkcija: Judesio detektorius
- IP įvertinimas: IP44 (apsauga nuo vandens purslų)
- Judesio jutiklio kampas: 120°
- Judesio jutiklio diapazonas: Up to 8m (both sides), max 10m
- Optimalus montavimo aukštis: 1.8 m
Garantija ir palaikymas
Information regarding specific warranty terms and customer support for Brilliant products may vary by region and retailer. Please refer to the documentation provided at the time of purchase or visit the official Brilliant websvetainėje, kurioje rasite išsamią informaciją apie garantiją ir palaikymo komandos kontaktus.
For technical assistance or inquiries, please contact Brilliant customer service through their official channels.