HPE ProLiant DL380 G10 Plus 2U Rack Server User Manual

Įvadas

This manual provides essential information for the safe and efficient use of your HPE ProLiant DL380 G10 Plus 2U Rack Server. Please read this manual thoroughly before installation and operation, and retain it for future reference.

The HPE ProLiant DL380 G10 Plus is a versatile 2U rack server designed for demanding workloads, offering high performance and expandability. It features an Intel Xeon Gold 5315Y processor, 32 GB RAM (expandable to 2 TB), and a 12Gb/s SAS controller.

Saugos informacija

Visada laikykitės šių saugos priemonių, kad išvengtumėte sužalojimų ir įrangos sugadinimo:

• Užtikrinkite tinkamą visų elektros jungčių įžeminimą.
• Do not operate the server with covers removed.
• Disconnect power before performing any maintenance or upgrades.
• Install the server in a well-ventilated area to prevent overheating.
• Use only HPE-approved components and accessories.

Sąrankos vadovas

1. Išpakavimas ir patikrinimas

Carefully remove the server from its packaging. Inspect for any signs of shipping damage. Report any damage to your carrier and reseller immediately.

1 pav.: priekis view of the HPE ProLiant DL380 G10 Plus 2U Rack Server. This image shows the server's front panel, including drive bays and control buttons.

2. Stovo montavimas

The HPE ProLiant DL380 G10 Plus is a 2U rack-mountable server. Follow the instructions provided with your rack rail kit for secure installation into a standard 19-inch server rack.

1. Attach the rail kit to the server and the rack.
2. Slide the server into the rack until it clicks into place.
3. Secure the server to the rack using the provided screws.

3. Periferinių įrenginių ir maitinimo prijungimas

Connect necessary peripherals such as keyboard, mouse, and monitor (if applicable) to the server's rear ports. Connect network cables to the appropriate Ethernet ports. Finally, connect the power cords to the server's power supply units and then to a grounded power outlet.

Naudojimo instrukcijos

1. Pradinis įjungimas

Press the power button on the front panel of the server. Observe the POST (Power-On Self-Test) sequence. The server will typically boot into the installed operating system or a pre-boot environment.

2. Accessing iLO (Integrated Lights-Out)

HPE iLO provides remote server management capabilities. To access iLO, connect a network cable to the iLO dedicated management port and configure its IP address through the server's BIOS/UEFI settings or via DHCP.

• Atidarykite a web browser and enter the iLO IP address.
• Log in using the credentials found on the iLO default password tag (usually on the server chassis).

3. Operacinės sistemos diegimas

Refer to your operating system's documentation for detailed installation procedures. HPE provides drivers and firmware updates on its official support websvetainę.

Priežiūra

1. Reguliarus valymas

Periodically clean the server's exterior and ventilation openings to ensure optimal airflow. Use a soft, dry cloth. Do not use liquid cleaners directly on the server.

2. Programinės-aparatinės įrangos ir tvarkyklių atnaujinimai

Regularly check the HPE support website for the latest firmware and driver updates for your DL380 G10 Plus server. Keeping components updated ensures stability, performance, and security.

3. Komponento keitimas

For replacing components like hard drives, memory modules, or power supplies, always refer to the specific service manual for the HPE ProLiant DL380 G10 Plus. Ensure the server is powered off and disconnected from power before opening the chassis.

Trikčių šalinimas

This section provides solutions to common issues. For more complex problems, consult the HPE support documentation or contact technical support.

Specifikacijos

Garantija ir palaikymas

Your HPE ProLiant DL380 G10 Plus server is covered by a manufacturer's warranty. For detailed warranty terms and conditions, please refer to the documentation included with your purchase or visit the official HPE support websvetainę.

For technical assistance, product registration, or to download the latest drivers and firmware, please visit the HPE palaikymas websvetainę. You may also contact HPE technical support directly using the contact information provided on their websvetainę.

Pastaba: Protection plans may be available for extended coverage. Check with your reseller for options like the 4-Year Protection Plan or Complete Protect monthly plan.