Įvadas
Thank you for choosing BERTSCHAT® Rechargeable Heated Insoles. These insoles are designed to provide warmth and comfort for your feet in various conditions, from outdoor activities to daily wear. This manual provides essential information for the safe and effective use, setup, operation, and maintenance of your heated insoles.
Produktas baigtasview
The BERTSCHAT® Rechargeable Heated Insoles system includes the following components:
- 1 pair of BERTSCHAT® Heated Insoles
- 1 Nuotolinis valdymas
- 1 USB įkrovimo laidas
- 2 Power Banks (integrated into insoles)
An image showing a pair of BERTSCHAT rechargeable heated insoles and their accompanying remote control. The insoles are black with a grey and orange design, featuring the 'BERTSCHAT' logo. The remote control is black with four orange buttons: power, H (High), M (Medium), and L (Low).
Sąranka
- Pradinis įkrovimas: Before first use, fully charge both insoles. Connect the USB charging cable to the charging port on each insole and to a compatible USB power adapter (not included). The charging indicator light will show the charging status. A full charge typically takes several hours.
- Insole Placement: Insert the heated insoles into your shoes. Ensure they fit comfortably and do not cause any pressure points. If necessary, you may trim the insoles to fit your shoe size using the guide lines on the underside (trimming should only be done at the toe end and carefully to avoid damaging heating elements).
- Nuotolinio valdymo pultas: The remote control is pre-paired with the insoles. Ensure the remote has a working battery.
Įkrovimas
The BERTSCHAT® Heated Insoles feature integrated power banks that are rechargeable via the provided USB cable.
- Locate the charging port on each insole.
- Connect the USB charging cable to the insole's charging port.
- Connect the other end of the USB cable to a standard USB power source (e.g., wall adapter, computer USB port, power bank).
- The indicator light on the insole will illuminate during charging and change color or turn off when fully charged.
- Charging time may vary depending on the power source and remaining battery level.
Operacija
Your BERTSCHAT® Heated Insoles are operated using the wireless remote control.
- Maitinimo įjungimas/išjungimas: Paspauskite maitinimo mygtuką (⏻) on the remote control to turn the insoles on or off. The insoles will typically indicate power status with a light.
- Šilumos lygio reguliavimas: Use the 'H', 'M', and 'L' buttons on the remote to select your desired heat level:
- H (aukštas): Provides maximum heat, up to 68°C. Ideal for extremely cold conditions.
- M (vidutinė): Provides moderate heat for sustained comfort.
- L (žemas): Provides gentle warmth for extended use.
- Temperatūros jutiklis: The integrated temperature sensor helps maintain an optimal foot climate and manages battery power efficiently.
Priežiūra
- Valymas: Clean the insoles with a damp cloth. Do not submerge them in water or machine wash. Ensure they are completely dry before recharging or storing.
- Saugykla: Store the insoles in a cool, dry place when not in use. For long-term storage, it is recommended to charge the insoles to about 50% capacity every few months to preserve battery life.
- Nuotolinio valdymo pulto baterija: Replace the remote control battery as needed. Refer to the remote control's specific instructions for battery type and replacement procedure.
Trikčių šalinimas
| Problema | Galima priežastis | Sprendimas |
|---|---|---|
| Insoles not heating | Low battery; Insoles not turned on; Remote control issue. | Charge insoles fully. Press power button on remote. Check remote battery. |
| Nuotolinio valdymo pultas neveikia | Remote battery depleted; Remote out of range; Pairing issue. | Replace remote battery. Ensure remote is close to insoles. Re-pair if necessary (refer to specific pairing instructions if provided with product). |
| Short heating duration | Insoles not fully charged; High heat setting used continuously; Extreme cold environment. | Ensure full charge. Use lower heat settings for longer duration. |
Specifikacijos
- Medžiaga: 70% plastic, 20% polyester, 10% rubber
- Heating Duration: Up to 12 hours (depending on heat setting and environmental conditions)
- Maksimali temperatūra: Iki 68°C
- Maitinimo šaltinis: Integrated rechargeable battery (USB cable provided)
- Valdymas: Belaidis nuotolinio valdymo pultas
Saugos informacija
- Do not puncture, cut, or modify the insoles.
- Laikyti atokiai nuo atviros liepsnos ir didelio karščio.
- Do not use if the insoles appear damaged.
- Consult a physician before use if you have circulatory problems, diabetes, or are pregnant.
- Nenaudoti miegant.
- Laikyti vaikams nepasiekiamoje vietoje.
- Naudokite tik pateiktą įkrovimo laidą.
Garantija ir palaikymas
For warranty information or technical support, please refer to the product packaging or contact BERTSCHAT® customer service directly. Keep your proof of purchase for warranty claims.