Jambo KL-217

Jambo 16-inch Liquid Motion Lamp (Model KL-217) User Manual

Modelis: KL-217

Įvadas

Thank you for choosing the Jambo 16-inch Liquid Motion Lamp. This manual provides essential information for the safe and proper use, setup, operation, and maintenance of your lampPrieš naudojimą atidžiai perskaitykite ir išsaugokite ateičiai.

Jambo 16-inch Liquid Motion Lamp with blue base and cap, purple liquid, and orange wax.
Jambo 16-inch Liquid Motion Lamp with blue base and cap, purple liquid, and orange wax.

The Jambo Liquid Motion Lamp creates a mesmerizing visual display as heated wax slowly rises and falls within a liquid-filled glass vessel. This dynamic effect provides a calming and decorative ambiance for any indoor space.

Saugos informacija

Norėdami užtikrinti saugų darbą ir išvengti žalos, laikykitės šių saugos priemonių:

  • Naudoti tik patalpose: Šis lamp is designed for indoor use in dry locations. Do not use it outdoors or in wet environments.
  • Elektros sauga: Įsitikinkite, kad lamp is connected to a 120-volt power outlet. Do not overload electrical outlets.
  • Įspėjimas apie karštį: Lamp and its contents become hot during operation. Do not touch the glass or base while the lamp is on or immediately after turning it off. Allow sufficient time for cooling.
  • Stabili vieta: Padėkite lamp on a flat, stable, and heat-resistant surface away from edges where it could be easily knocked over.
  • Avoid Shaking: Do not shake, drop, or move the lamp while it is operating or hot, as this can damage the internal components and cause the liquid to become cloudy.
  • Saugokite nuo vaikų ir naminių gyvūnėlių: Due to the heat generated, keep the lamp vaikams ir naminiams gyvūnėliams nepasiekiamoje vietoje.
  • Vėdinimas: Ensure adequate air circulation around the lamp to prevent overheating. Do not cover the lamp.
  • Pažeistas laidas: Jei maitinimo laidas pažeistas, jį turi pakeisti gamintojas arba kvalifikuotas aptarnavimo atstovas, kad būtų išvengta pavojų.

Pakuotės turinys

Išpakuodami patikrinkite, ar yra visi komponentai:

  • 1 x Jambo Liquid Motion Lamp Unit (Base, Glass Vessel, Cap)
  • 1 x 30-Watt Incandescent Bulb (E17 base)
Diagram showing the components of the Jambo Liquid Motion Lamp: liquid lamp, 30-watt bulb, standard plug, high-quality durable glass, and sleek blue base and cap.
Components of the Jambo Liquid Motion Lamp, including the glass vessel, base, cap, and bulb.

Sąranka

Follow these steps to set up your Jambo Liquid Motion Lamp:

  1. Išpakuoti: Atsargiai išimkite visus komponentus iš pakuotės.
  2. Lemputės montavimas: If the bulb is not pre-installed, gently screw the included 30-watt E17 incandescent bulb into the socket located in the lamp base. Do not overtighten.
  3. Place Glass Vessel: Carefully place the glass vessel onto the lamp base, ensuring it sits securely.
  4. Pritvirtinkite dangtelį: Place the decorative cap onto the top of the glass vessel.
  5. Pozicija Lamp: Padėkite surinktą lamp on a flat, stable, and heat-resistant surface, away from direct sunlight, extreme temperatures, or drafts.
  6. Prijunkite maitinimą: Prijunkite maitinimo laidą į standartinį 120 voltų elektros lizdą.
Image illustrating the simplicity of setting up the Jambo Liquid Motion Lamp, emphasizing 'Ready to Use' by just plugging it in.
The Jambo Liquid Motion Lamp is ready for use after simple assembly and plugging into a power source.

Naudojimo instrukcijos

Operating your Jambo Liquid Motion Lamp yra paprasta:

  1. Įjungti: Locate the rotary switch on the power cord or base (depending on model) and turn it to the 'ON' position. The bulb will illuminate.
  2. Apšilimo laikas: For the first use, or after extended periods of inactivity, the lamp may take 2-4 hours to fully warm up and for the wax to begin flowing smoothly. This is normal.
  3. Wax Movement: Once warmed, the wax will begin to soften, rise, and fall in captivating patterns. The lamp operates best at room temperature (20-25°C / 68-77°F).
  4. Veikimo trukmė: For optimal performance and longevity, it is recommended to operate the lamp for no more than 8-10 hours at a time. Allow it to cool down completely before restarting.
  5. Išjungti: Norėdami išjungti lamp, rotate the switch to the 'OFF' position and unplug it from the power outlet when not in use for extended periods.
The Jambo Liquid Motion Lamp illuminated in a bedroom setting, casting a soft glow.
The Jambo Liquid Motion Lamp creating a calming ambiance in a room.
The Jambo Liquid Motion Lamp displayed on a side table in a modern living room, adding a decorative accent.
The Jambo Liquid Motion Lamp as a decorative accent in a modern living space.

Priežiūra

Proper care will ensure the longevity and performance of your lamp:

  • Valymas: Įsitikinkite, kad lamp is unplugged and completely cool before cleaning. Wipe the exterior of the glass and base with a soft, damp cloth. Do not use abrasive cleaners or immerse any part of the lamp vandenyje.
  • Lemputės keitimas: If the bulb burns out, unplug the lamp and allow it to cool. Carefully remove the old bulb and replace it with a new 30-watt, E17 base incandescent bulb. Ensure the replacement bulb matches the original specifications.
  • Saugykla: Jei saugote lamp for an extended period, ensure it is clean, dry, and stored upright in a cool, dark place.
  • Neatidaryk: Never attempt to open the sealed glass vessel or tamper with its contents. This will void any warranty and can be dangerous.

Trikčių šalinimas

If you encounter issues with your Jambo Liquid Motion Lamp, žr. šias dažniausiai pasitaikančias problemas ir sprendimus:

ProblemaGalima priežastisSprendimas
Lamp neįsijungia.No power, faulty bulb, or loose connection.Patikrinkite, ar lamp is properly plugged in. Ensure the power outlet is functional. Verify the rotary switch is in the 'ON' position. Replace the bulb if it is burnt out.
Wax is not moving or moving slowly.Insufficient warm-up time, cold room temperature, or incorrect bulb wattage.Skirkite 2–4 valandas.amp to fully warm up. Ensure the room temperature is between 20-25°C (68-77°F). Confirm the bulb is a 30-watt E17 incandescent type.
Skystis yra drumstas.Initial cloudiness, lamp shaken, or improper storage.Initial cloudiness often clears after several hours of continuous operation. Avoid shaking or dropping the lamp. If cloudiness persists after multiple uses, contact customer support.
Wax is stuck at the top or bottom.Not fully warmed up, lamp tilted, or excessive heat/cold.Įsitikinkite, kad lamp has had sufficient warm-up time. Verify the lamp is placed on a level surface. Avoid placing the lamp near heat sources or in very cold areas.

Specifikacijos

Key technical specifications for the Jambo 16-inch Liquid Motion Lamp (Model KL-217):

FunkcijaDetalė
Modelio numerisKL-217
Matmenys (G x P x A)11.4 cm x 11.4 cm x 39.4 cm (apytiksliai 4.5 x 4.5 x 15.5 colio)
Šešėlio aukštis16 colių
Maitinimo šaltinisSu laidu elektra
ttage120 voltų
Vattage30 vatų
Lemputės tipasKaitrinė
Lemputės pagrindasE17
Jungiklio tipasRotary
Bazinė medžiagaAliuminis
Atspalvio medžiagaStiklas
Apdailos tipasMetalinis
Naudojimas viduje / laukeVidinis
Atsparumo vandeniui lygisNeatsparus vandeniui
UPC850019692297

Garantija ir palaikymas

Jambo is committed to providing high-quality products. While specific warranty details are not provided in this manual, please retain your proof of purchase for any warranty claims.

For technical support, troubleshooting assistance beyond what is covered in this manual, or inquiries regarding parts and service, please contact Jambo customer support through the retailer where you purchased the product or visit the official Jambo websvetainė kontaktinei informacijai.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.