Ecolight LED Battery-Operated Bar Light Instruction Manual

1. Įvadas

This manual provides instructions for the installation, operation, and maintenance of your Ecolight LED Battery-Operated Bar Light. This versatile 9-inch LED light offers both 4000K bright white and RGB color-changing options, controlled by tapping the light or using the included infrared (IR) remote control. It is designed for various indoor applications such as under cabinets, in laundry rooms, living rooms, utility areas, or closets.

Kas įskaičiuota:

• Ecolight LED Bar Light
• Infraraudonųjų spindulių (IR) nuotolinio valdymo pultas
• 6 AA baterijos
• Command Strips by 3M for damage-free mounting
• Tvirtinimo varžtai

Figure 1: Ecolight LED Bar Light with remote and mounting accessories.

2. Saugos informacija

• Prieš montuodami ir naudodami perskaitykite visas instrukcijas.
• This product is intended for indoor use only. Do not expose to water or high humidity.
• Nemaišykite senų ir naujų baterijų. Nemaišykite šarminių, standartinių (anglies-cinko) arba įkraunamų (nikelio-kadmio) baterijų.
• Išimkite baterijas, jei šviestuvas bus nenaudojamas ilgesnį laiką.
• Baterijas laikykite vaikams nepasiekiamoje vietoje.
• Nežiūrėkite tiesiai į LED šviesos šaltinį.

3. Sąranka

3.1 Akumuliatoriaus įdėjimas

1. Remove the back battery compartment cover by sliding it off.
2. Įdėkite 6 AA baterijas, užtikrindami teisingą poliškumą (+/-), kaip nurodyta skyriaus viduje.
3. Uždėkite akumuliatoriaus skyriaus dangtelį.

Figure 2: Installing AA batteries into the light bar.

3.2 Montavimo parinktys

The Ecolight LED Bar Light can be mounted using either the included Command Strips for damage-free installation or screws for a permanent fixture.

Using Command Strips (Damage-Free Mounting):

1. Clean the desired mounting surface with rubbing alcohol and let it dry completely.
2. Separate the Command Strips. Remove the red liner from one side of each strip and press it firmly onto the back of the light bar.
3. Remove the black liners from the exposed side of the Command Strips.
4. Position the light bar on the cleaned surface and press firmly for 30 seconds.
5. To remove, gently slide the light bar off the mounted base. Then, slowly stretch each strip downwards against the surface until it releases.

Figure 3: Attaching Command Strips to the light bar for mounting.

Using Screws (Permanent Mounting):

1. Mark the desired screw locations on your mounting surface using the keyhole slots on the back of the light bar as a guide.
2. Jei reikia, išgręžkite bandomąsias skylutes.
3. Insert the included screws into the pilot holes, leaving a small gap between the screw head and the surface.
4. Align the keyhole slots on the back of the light bar with the screw heads and slide the light into place until secure.

3.3 Įdiegimo vaizdo įrašas

Video 1: Detailed instructions for installing and removing the Ecolight LED Bar Light using Command Strips.

4. Naudojimo instrukcijos

4.1 Tap Control

The light bar features a tap-on/off activation directly on its lens:

• Bakstelėkite vieną kartą: Activates bright white light (4000K).
• Bakstelėkite du kartus: Initiates continuous RGB color cycling.
• Bakstelėkite tris kartus: Sets the light to the currently displayed RGB color.
• Bakstelėkite keturis kartus: Išjungia šviesą.

Figure 4: Tap activation on the light bar lens.

4.2 Nuotolinio valdymo pulto funkcijos

The included IR remote control provides comprehensive control over the light bar's features:

• ĮJUNGTA/IŠJUNGTA: Įjungia arba išjungia šviesą.
• LED: Activates continuous RGB color cycling.
• Balta: Activates 4000K bright white light.
• +/- (Brightness): Adjusts the brightness level (dimmable).
• R, G, B Buttons: Selects specific Red, Green, or Blue colors.
• Spalvų ratas: Allows selection of various colors within the RGB spectrum.
• NUSTATYTI: Confirms a selected color from the color wheel.
• Timer (5, 15, 30, 60 minutes): Sets an auto-off timer for the specified duration.

Figure 5: Remote control for the LED Bar Light.

6 pav. Pvzamples of RGB color output from the light bar.

5. Priežiūra

5.1 Akumuliatoriaus keitimas

When the light output diminishes or the light stops functioning, it's time to replace the batteries. The easy battery change compartment allows you to slide the light out without removing the mounting strips (if used).

1. If mounted with Command Strips, gently slide the light bar off its mounted base.
2. Nuimkite galinį baterijų skyriaus dangtelį.
3. Replace all 6 AA batteries with new ones, observing correct polarity.
4. Replace the battery compartment cover and reattach the light bar to its base (if applicable).

5.2 Valymas

To clean the light bar, wipe it with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these may damage the finish or electronic components.

6. Problemų sprendimas

7. Specifikacijos

• Modelio numeris: BO1307-RGB-09LF1-E
• Šviesos šaltinio tipas: LED
• Ryškumas: 80 liumenų
• Spalvos temperatūra: 4000K (White), RGB Color Changing
• Maitinimo šaltinis: 6 AA baterijos (pridedamos)
• Baterijos veikimo laikas: Maždaug 100 val
• Gaminio matmenys: 9 colio pločio x 2.5 colio aukščio x 1 colio gylio
• Prekės svoris: 3.68 uncijos
• Medžiaga: Plastikiniai
• Kontrolės metodas: Tap, Infrared Remote
• Ypatingos savybės: Dimmable, Auto-Off Timer (5, 15, 30, 60 min)
• Naudojimas viduje / lauke: Tik patalpose
• Vidutinis gyvenimas: 30,000 valandų

7 pav.: Gaminio matmenys.

8. Garantija ir palaikymas

This Ecolight LED Battery-Operated Bar Light comes with a 6 metų ribota garantija. For warranty claims, technical support, or further assistance, please contact Good Earth Lighting customer service. Refer to the product packaging or the official Good Earth Lighting websvetainė, kurioje rasite kontaktinius duomenis.