Generic QDX1.5-32-0.75 Submersible Pump Instruction Manual

1. Įvadas

This manual provides essential information for the safe and efficient operation, installation, and maintenance of your Generic QDX1.5-32-0.75 Submersible Pump. Please read these instructions carefully before using the pump and retain this manual for future reference.

The QDX1.5-32-0.75 is a robust electric submersible pump designed for various water transfer applications, featuring a 1-inch outlet, a maximum head of 30 meters, and a maximum flow rate of 135 liters per minute. It operates on a 220V single-phase 60Hz AC power supply with a 0.75 kW (1 HP) motor.

2. Saugos informacija

ĮSPĖJIMAS: Nesilaikant šių saugos nurodymų, gali kilti elektros smūgis, gaisras, sunkūs sužalojimai ar mirtis.

• Always disconnect the pump from the power supply before performing any maintenance, installation, or cleaning.
• Užtikrinkite maitinimo šaltinio ttage matches the pump's specifications (220V, 60Hz).
• Do not operate the pump with a damaged power cord or plug. Replace immediately if damaged.
• Never run the pump dry. Ensure it is fully submerged in water during operation to prevent overheating and damage.
• Keep hands, feet, and clothing clear of the pump's intake and outlet during operation.
• Do not use the pump for flammable, corrosive, or explosive liquids. It is designed for clean water only.
• Užtikrinkite tinkamą įžeminimą, kad išvengtumėte elektros pavojaus.
• Vaikus reikia prižiūrėti, kad jie nežaistų su prietaisu.

3. Produktas baigtasview

The Generic QDX1.5-32-0.75 Submersible Pump is constructed from durable aluminum, iron, and plastic components, designed for reliable performance in water pumping tasks.

1 vaizdas: priekis view of the Generic QDX1.5-32-0.75 Submersible Pump, showing the silver-colored pump body, black power cable, blue float switch, and the 1-inch outlet connection.

Pagrindinės funkcijos:

• Variklio tipas: Povandeninis
• Maitinimo šaltinis: Electric (220V, 60Hz, Single Phase)
• Galia: 0.75 kW (1 Horsepower)
• Maksimali galva: 30 metrų
• Maksimalus srautas: 135 litro per minutę
• Greitis: 3600 aps./min
• Statybinės medžiagos: Aliuminis, geležis, plastikas
• Įtraukti komponentai: Submersible Pump unit

4. Sąranka

1. Išpakavimas: Atsargiai išimkite siurblį iš pakuotės. Patikrinkite, ar transportavimo metu nėra jokių pažeidimų.
2. Vieta: Position the pump in the desired location, ensuring it is on a stable, level surface and can be fully submerged in the water to be pumped. Avoid placing it directly on mud or sand to prevent clogging.
3. Žarnos jungtis: Connect a suitable discharge hose to the 1-inch outlet of the pump. Secure the hose with a clamp kad būtų išvengta nuotėkių ir atsijungimų eksploatacijos metu.
4. Elektros jungtis: Ensure the power outlet is properly grounded and matches the pump's electrical requirements (220V, 60Hz). Plug the pump into the power outlet. If a float switch is present, ensure it has free movement.
5. Panardinimas: Lower the pump into the water. Ensure the pump is completely submerged before connecting to power or starting operation.

5. Naudojimo instrukcijos

1. Pradinis paleidimas: After completing the setup steps, plug the pump into the power source. The pump will start automatically if equipped with a float switch and the water level is sufficient.
2. Stebėjimas: Observe the pump's operation. Ensure water is being discharged smoothly and there are no unusual noises or vibrations.
3. Float Switch Operation: If your pump has a float switch, it will automatically turn the pump on when the water level rises and turn it off when the water level drops below a certain point. Ensure the float switch can move freely.
4. Išsijungia: To stop the pump, simply unplug it from the power source. If using a float switch, the pump will stop automatically when the water level is low.
5. Sausas bėgimas: Avoid dry running the pump. Prolonged operation without water will cause severe damage to the motor and seals.

6. Priežiūra

Regular maintenance ensures the longevity and optimal performance of your submersible pump.

• Prieš techninę priežiūrą: Always disconnect the pump from the power supply before any inspection or maintenance.
• Valymas: Periodically clean the pump's intake screen to remove debris, leaves, or sediment that may obstruct water flow.
• Patikra: Regularly inspect the power cord and plug for any signs of damage, cuts, or fraying. Check the discharge hose for blockages or wear.
• Saugykla: Jei siurblys ilgesnį laiką nebus naudojamas, jį kruopščiai išvalykite, išleiskite visą vandenį ir laikykite sausoje, nuo šalčio apsaugotoje vietoje.
• Plūdinis jungiklis: Įsitikinkite, kad plūdinis jungiklis yra švarus ir laisvai juda.

7. Problemų sprendimas

8. Specifikacijos

9. Garantija ir palaikymas

For warranty information and technical support, please refer to the documentation provided with your purchase or contact the retailer. Standard return policies, such as a 15-day return period, may apply.