Produktas baigtasview
The Yaheetech Classic Metal Platform Bed Frame is designed to provide a sturdy and stylish foundation for your mattress without the need for a box spring. Its Victorian-style iron-art headboard and footboard feature curved lines and thick tube frames, offering a blend of classic and romantic aesthetics that complement various home decors, including modern, traditional, farmhouse, and rustic styles.
This bed frame is constructed from a robust metal frame, ensuring high load-bearing capacity and stability. It includes 12 metal slats for strong mattress support and features a powder-coated surface for medium rust and scratch resistance, promoting long-term durability. The design also incorporates round corners, a smooth finish, and protective footpads for enhanced safety. The high footboard helps keep bedding securely on the bed.
Figure 1: Fully assembled Yaheetech Classic Metal Platform Bed Frame.
Saugos informacija
- Atsargiai: Be cautious around the high footboard to avoid pinching.
- Svorio talpa: Neviršykite maksimalaus 800 svarų svorio.
- Prieš naudodami įsitikinkite, kad visos jungtys yra tvirtai priveržtos.
- Surinkdami mažas dalis laikykite vaikams nepasiekiamoje vietoje.
- Nestokite ir nešokinėkite ant lovos rėmo.
Komponentų sąrašas
Before beginning assembly, ensure all parts listed below are present and undamaged. Refer to the included installation manual for detailed part identification.
- Galva
- Padas
- Šoniniai bėgiai
- Metalinės grotelės (12 vnt.)
- Support Legs (various sizes)
- Hardware (screws, bolts, washers, nuts)
- Surinkimo įrankiai (šešiakampis raktas ir kt.)
- Montavimo vadovas
Figure 2: Key features and components of the bed frame, including simple headboard style, metal tube construction, under-bed storage, and protective footpads.
Sąranka ir surinkimas
Assembly of the Yaheetech bed frame is designed to be straightforward, typically taking approximately 60 minutes with two adults. All necessary hardware and tools are provided. Follow these steps carefully:
- Išpakuokite ir atpažinkite dalis: Carefully remove all components from the packaging. Lay them out on a clean, flat surface to identify each part according to the included installation manual.
- Galvūgalio ir kojūgalio surinkimas: Connect the main sections of the headboard and footboard as per the diagrams in the manual.
- Šoninių turėklų pritvirtinimas: Securely attach the side rails to the assembled headboard and footboard. Ensure proper alignment.
- Atraminių kojų montavimas: Attach all supporting legs to the frame. The frame features 14 supporting legs for stability.
- Įdėkite metalines plokštes: Place the metal slats into their designated positions on the frame. The built-in metal slats help prevent the mattress from sliding.
- Pradinis priveržimas: Half-tighten all screws and ensure all parts are properly aligned. This allows for minor adjustments before final tightening.
- Galutinis priveržimas: Once all parts are aligned, tighten all screws completely to ensure the frame is sturdy and secure.
- Patikrinkite stabilumą: After assembly, gently shake the frame to ensure there is no wobbling or creaking. If any instability is detected, re-check all connections and tighten as necessary.
Figure 3: Illustration of the multiple supporting legs for enhanced stability.
Figure 4: Detailed steps for installing the metal slats securely.
Figure 5: Proper screw tightening procedure for optimal stability.
Figure 6: Mechanism designed to prevent mattress sliding.
Priežiūra
- Valymas: Metalinį rėmą nuvalykite minkšta,amp cloth. Avoid using harsh chemicals or abrasive cleaners, which may damage the powder-coated finish.
- Reguliarus patikrinimas: Periodiškai patikrinkite visus varžtus ir sraigtus, kad jie būtų tvirtai priveržti. Jei reikia, priveržkite, kad išlaikytumėte stabilumą ir išvengtumėte girgždėjimo.
- Venkite per didelės drėgmės: While the frame has rust resistance, prolonged exposure to excessive moisture should be avoided to preserve its finish and integrity.
Trikčių šalinimas
| Problema | Galima priežastis | Sprendimas |
|---|---|---|
| Bed frame is wobbly or shaky. | Atsilaisvinę varžtai arba netinkamas surinkimas. | Ensure all bolts are fully tightened. Refer to the assembly instructions (Figure 5) to confirm correct installation of all parts. |
| Iš rėmo girdisi girgždėjimas. | Atsilaisvinusios jungtys arba trintis tarp metalinių dalių. | Re-tighten all bolts. If squeaking persists, apply a small amount of lubricant (e.g., silicone spray) to connection points. |
| Čiužinys slysta ant rėmo. | Improper placement of mattress or missing anti-slip features. | Ensure the mattress is centered on the frame. Verify that the built-in mattress stoppers/embedded design features are correctly installed (Figure 6). |
| Sunkumas surinkimo metu. | Parts not aligning or incorrect orientation. | Do not fully tighten screws until all parts are loosely assembled and aligned (Figure 5). Refer to the detailed diagrams in the manual. Two people are recommended for assembly. |
Specifikacijos
| Funkcija | Detalė |
|---|---|
| Modelio numeris | YT-00116464-001 |
| Dydis | Karalius |
| Gaminio matmenys (I x P x A) | 82.5" x 78.5" x 42" |
| Suderinamas čiužinio dydis | 80" ilgis × 76" plotis |
| Medžiaga | Geležis |
| Spalva | Juoda |
| Apdailos tipas | Dengtas milteliniu būdu |
| Maksimali svorio talpa | 800 svaro |
| Under-Bed Storage Height | 12.6 colių |
| Reikalingas surinkimas | Taip |
| Ypatingos savybės | No Box Spring Needed, Squeak Resistant, Sturdy, Under Bed Storage |
Figure 7: Detailed dimensions and weight capacity of the bed frame.
Garantija ir palaikymas
For warranty information, returns, or customer support, please contact Yaheetech directly. Yaheetech offers a 30-day easy return policy and dedicated customer support.
Galite aplankyti pareigūną „Yaheetech“ parduotuvė „Amazon“ platformoje daugiau informacijos ir susisiekimo galimybių.