Smartwares FGA-13410

Smartwares FGA-13410 Gas Detector Instruction Manual

Model: FGA-13410 | Brand: Smartwares

1. Įvadas

The Smartwares FGA-13410 Gas Detector is designed to enhance safety in your home by detecting the presence of natural gas, city gas, propane, butane, and methane (LNG, LPG). These gases are commonly used for heating, cooking, and water heating. While essential, leaks can lead to explosions, fires, or asphyxiation at high concentrations. This device provides an early warning system with an 85 dB siren to alert you to potential gas leaks.

This detector does not detect carbon monoxide (CO) or carbon dioxide (CO2). For detection of these gases, please refer to other Smartwares products.

Smartwares FGA-13410 Gas Detector banner

Image: Smartwares FGA-13410 Gas Detector product banner.

2. Saugos informacija

Please read all safety instructions carefully before installation and use. Failure to follow these instructions may result in property damage, injury, or death.

  • This device detects combustible gases (natural gas, propane, butane, methane). It is not a carbon monoxide (CO) or carbon dioxide (CO2) detector.
  • Gas leaks can be extremely dangerous. If the alarm sounds, immediately ventilate the area, turn off gas supplies if safe to do so, and evacuate the premises. Contact emergency services or your gas provider.
  • Do not paint the detector. Paint can clog the sensor openings and interfere with the detector's ability to sense gas.
  • Do not install the detector in areas with high humidity, extreme temperatures, or excessive dust, as this can affect performance.
  • The sensor has a lifespan of 5 years. Replace the device after this period to ensure continued protection.

3. Pakuotės turinys

Patikrinkite, ar pakuotėje yra visi reikalingi daiktai:

  • Smartwares FGA-13410 Gas Detector
  • Instrukcijų vadovas
  • Mounting Bracket
  • Tvirtinimo varžtai

4. Produkto ypatybės

Smartwares FGA-13410 Gas Detector features banner

Image: Smartwares FGA-13410 Gas Detector features overview.

  • Detects 3 Gases: Alerts you to leaks of methane, propane, or butane with an 85 dB siren.
  • Bandymo mygtukas: Allows you to test the detector's functionality approximately every 6 months.
  • LED indikatoriai: Light indicators show device status, including malfunctions or end-of-life (lifespan: 5 years).
  • Maitinimas iš tinklo: This gas detector is powered directly from the mains. No batteries are required.
  • Paprastas montavimas: Easy to install by mounting on a wall near the gas source and plugging into an electrical outlet.

5. Sąranka ir diegimas

The Smartwares FGA-13410 Gas Detector requires no complicated installation and operates directly from a mains power supply.

  1. Pasirinkite vietą: Select an installation location close to the potential gas source.
    • For natural gas (methane), which is lighter than air, install the detector high on the wall, at least 30 cm (12 inches) from the ceiling and 1.5 meters (5 feet) from the gas source.
    • For propane or butane (LPG), which are heavier than air, install the detector low on the wall, at least 15 cm (6 inches) from the floor and 1.5 meters (5 feet) from the gas source.
    • Avoid installing near windows, doors, ventilation openings, or areas with high humidity or extreme temperatures.
  2. Sumontuokite laikiklį: Use the provided screws to fix the mounting bracket securely to the chosen wall location.
  3. Įdėkite įrenginį: Carefully slide the gas detector onto the mounted bracket until it clicks into place.
  4. Prijunkite prie maitinimo: Plug the detector into a standard electrical outlet. The device will begin a preheating phase, which may take a few minutes. During this time, the LED indicator may flash or cycle through colors.
  5. Pradinis bandymas: After the preheating phase, the green LED should illuminate steadily, indicating normal operation. Press the test button to confirm the alarm sounds.
Smartwares FGA-13410 Gas Detector with power cable

Image: Gas detector with power cable for mains connection.

Priekyje view of Smartwares FGA-13410 Gas Detector

Vaizdas: priekis view of the gas detector showing LED and speaker.

6. Naudojimo instrukcijos

Once installed and powered, the Smartwares FGA-13410 Gas Detector operates continuously to monitor for gas leaks.

6.1. LED indikatoriai

  • Žalias šviesos diodas: Indicates normal operation. A steady green light means the detector is functioning correctly.
  • Raudonas šviesos diodas: Indicates a gas alarm. Accompanied by an 85 dB siren.
  • Geltonas/oranžinis šviesos diodas: May indicate a fault or end-of-life warning. Refer to the troubleshooting section for specific patterns.

6.2. Test Function

It is recommended to test the detector's functionality every 6 months. To perform a test:

  1. Press and hold the test button located on the device.
  2. The alarm should sound (85 dB) and the red LED should flash, confirming the alarm and siren are operational.
  3. Release the button. The detector should return to normal operation (green LED steady).

7. Priežiūra

The Smartwares FGA-13410 Gas Detector requires minimal maintenance to ensure optimal performance.

  • Reguliarus valymas: Gently clean the exterior of the detector with a soft, damp cloth. Do not use harsh chemicals or abrasive cleaners. Ensure no dust or debris obstructs the sensor openings.
  • Jutiklio tarnavimo laikas: The ultra-sensitive sensor has a lifespan of 5 years. After this period, the detector will become obsolete and may not provide reliable detection. It is crucial to replace the entire device after 5 years from the date of manufacture or installation, whichever comes first.
  • Reguliarus testavimas: Perform the test function every 6 months as described in Section 6.2.

8. Problemų sprendimas

If your gas detector exhibits unusual behavior, refer to the following guide:

Simptomas Galima priežastis Sprendimas
Alarm sounds (red LED flashes) Aptiktas dujų nuotėkis.
  1. Immediately open windows and doors to ventilate the area.
  2. Turn off gas appliances and the main gas supply if safe to do so.
  3. Evacuate all occupants from the building.
  4. Susisiekite su greitosios pagalbos tarnybomis arba savo dujų tiekėju iš saugios vietos.
  5. Do not re-enter the building until it has been declared safe by professionals.
Yellow/Orange LED flashes or stays on Device fault or end-of-life warning.
  1. Unplug the device and plug it back in to reset.
  2. If the warning persists, the device may be faulty or have reached its 5-year lifespan.
  3. Replace the detector if it has reached its end-of-life or if the fault cannot be resolved.
Nėra maitinimo / šviesos diodai išjungti Nėra maitinimo.
  1. Check if the power cable is securely plugged into the outlet.
  2. Verify the electrical outlet is functioning (test with another appliance).
  3. Patikrinkite savo namų elektros grandinės jungiklį.
Alarm sounds frequently without gas presence False alarm, possibly due to strong fumes (e.g., cleaning products, aerosols) or sensor contamination.
  1. Vėdinkite plotą.
  2. Ensure the detector is not installed near sources of strong fumes.
  3. Clean the detector gently to remove any dust or debris from sensor openings.
  4. If false alarms persist, the sensor may be faulty or contaminated. Consider replacing the device.

9. Specifikacijos

Smartwares FGA-13410 Gas Detector with dimensions

Image: Gas detector showing product dimensions.

Šoninė view of Smartwares FGA-13410 Gas Detector

Vaizdas: Šoninė view of the gas detector.

Funkcija Detalė
Modelio numeris FGA-13410
Prekės ženklas Išmaniosios įrangos
Aptiktos dujos Natural Gas (Methane), Propane, Butane (LNG, LPG)
Signalizacijos garsumas 85 dB
Jutiklio tipas Elektrocheminis
Jutiklio tarnavimo laikas 5 metai
Maitinimo šaltinis Mains powered (220V)
Medžiaga ABS
Spalva Baltas
Matmenys (I x P x A) 3.3 x 8.6 x 11.2 cm
Svoris 200 gramų
Darbinė drėgmė 0 % – 95 %
Darbinė temperatūra Iki 55 laipsnių Celsijaus
Kilmės šalis Kinija

10. Garantija ir palaikymas

Smartwares products are designed for reliability and durability. For information regarding warranty terms and conditions, please refer to the documentation provided with your purchase or visit the official Smartwares websvetainę.

If you encounter any issues or have questions not covered in this manual, please contact Smartwares customer support. Contact details can typically be found on the product packaging or the Smartwares official websvetainę.

© 2024 Smartwares. Visos teisės saugomos.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.