BLNAN 8.7 Inch Wired Motion Sensor LED Ceiling Light

Įvadas

This manual provides detailed instructions for the safe installation, operation, and maintenance of your BLNAN 8.7 Inch Wired Motion Sensor LED Ceiling Light. Please read this manual thoroughly before installation and retain it for future reference.

Produkto savybės

• Integruotas judesio jutiklis: Built-in PIR infrared motion detector with a 120° detection angle and a range of 10ft (semidiameter).
• Adjustable Hold Time: Selectable light-on duration of 30 seconds, 120 seconds, or 180 seconds after motion detection.
• Trys veikimo režimai:
  • AUTOMATINIS režimas: Light activates when motion is detected in dark conditions.
  • ĮJUNGTAS režimas: Light remains constantly on.
  • G režimas: Light activates when motion is detected in both daytime and nighttime conditions.
• Trijų spalvų temperatūros: Selectable color temperatures of 3000K (Warm White), 4000K (Neutral White), and 5000K (Cool White) via a toggle switch before installation.
• Itin plonas dizainas: Žemas profasfile design with a diameter of 8.7 inches and a thickness of 0.99 inches, suitable for various spaces.
• Universalus montavimas: Can be installed as a flush mount on ceilings or walls.

Figure 1: Illustration of the three operating modes (AUTO, ON, G) and their activation conditions.

Figure 2: Detail of the color temperature toggle switch and motion sensor on the light fixture.

Pakuotės turinys

Prieš pradėdami diegti, patikrinkite, ar yra visi komponentai:

• 1x Corded Motion Activated Ceiling Light
• 1x Mounting Hardware Package (screws, wire nuts, plastic bracket)
• 1x naudojimo instrukcija (šis dokumentas)

Figure 3: Contents of the BLNAN Motion Sensor LED Ceiling Light package.

Saugos informacija

ĮSPĖJIMAS: Risk of electric shock. Disconnect power at the circuit breaker or fuse box before installation or servicing. Consult a qualified electrician if you are unsure about electrical wiring. Always follow local electrical codes.

• Ensure the power supply is OFF before handling any wiring.
• Šis įrenginys skirtas 120 V kintamosios srovės maitinimui.
• Nebandykite modifikuoti armatūros.
• Saugokite vaikus nuo montavimo vietos.

Sąranka ir diegimas

Norėdami tinkamai įdiegti, atlikite šiuos veiksmus:

1. Pasiruoškite montavimui:
   • Prieš pradėdami, išjunkite maitinimą grandinės pertraukikliu.
   • Before mounting, select your desired color temperature (3000K, 4000K, or 5000K) using the toggle switch located on the back of the fixture.
2. Įdiekite montavimo laikiklį:
   • Rotate and remove the plastic mounting bracket from the light fixture.
   • Attach the plastic bracket to your existing junction box using the provided screws. The bracket is designed for junction boxes with 2.75"-3.7" apart screw holes.
3. Laidų jungtys:
   • Connect the wires from the light fixture to your household wiring: Black to Black (Live), White to White (Neutral), and Green to Green/Bare Copper (Ground). Secure connections with wire nuts.
   • Use the hanging rope to temporarily support the fixture during wiring.
4. Šviestuvo montavimas:
   • Atsargiai įkiškite visus laidus į jungiamąją dėžę.
   • Align the light fixture with the installed mounting bracket and rotate it clockwise until it locks securely into place.
5. Atkurti maitinimą: Prie grandinės pertraukiklio vėl įjunkite maitinimą.

4 pav.: Vizualinis diegimo proceso vadovas.

Naudojimo instrukcijos

The light fixture features adjustable settings for operating mode and hold time. These settings are controlled by small switches located near the motion sensor on the fixture's surface.

1. Darbo režimo pasirinkimas:
   • Locate the mode switch (labeled AUTO, ON, G).
   • Slide the switch to your desired mode:
   • AUTOMATINIS: Motion and light sensor activated. Light turns on only when motion is detected in dark conditions.
   • ĮJUNGTA: Light remains continuously on, regardless of motion or ambient light.
   • G: Motion sensor activated. Light turns on when motion is detected, both during the day and at night.
2. Adjusting Hold Time:
   • Locate the hold time switch (labeled 30S, 120S, 180S).
   • Slide the switch to set how long the light remains on after motion is no longer detected:
   • 30S: 30 sekundžių
   • 120S: 120 sekundžių (2 minutės)
   • 180S: 180 sekundžių (3 minutės)

Figure 5: Switches for adjusting hold time and operating modes.

Priežiūra

Regular maintenance ensures optimal performance and longevity of your LED ceiling light.

• Valymas: Turn off power before cleaning. Use a soft, dry cloth to wipe the fixture. Do not use abrasive cleaners or solvents, as these may damage the finish or electrical components.
• LED tarnavimo laikas: Integruotas LED šviesos šaltinis veikia vidutiniškai 20 000 valandų ir jo negalima pakeisti.
• Patikra: Reguliariai tikrinkite šviestuvą, ar nėra pažeidimų ar atsilaisvinusių jungčių. Jei aptinkama problemų, atjunkite maitinimą ir kreipkitės į kvalifikuotą elektriką.

Trikčių šalinimas

Jei kyla problemų dėl šviestuvo, žr. šias dažniausiai pasitaikančias problemas ir sprendimus:

Specifikacijos

Garantija ir palaikymas

For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official BLNAN websvetainėje. Išsaugokite pirkimo kvitą kaip pirkimo įrodymą.