1. Įvadas
Thank you for choosing the Hbada P2 Pro Office Chair. This manual provides essential information for the safe assembly, proper operation, and effective maintenance of your new chair. Please read these instructions carefully before use and retain them for future reference.
2. Saugos informacija
To ensure your safety and prevent damage to the product, please observe the following:
- Rounded corners are designed to prevent injury during impact.
- Nestovėkite ant kėdės.
- Do not use the chair on uneven surfaces.
- Reguliavimo metu laikykite vaikus atokiai nuo judančių dalių.
- Ensure all screws are tightened securely after assembly and periodically check for looseness.
3. Produkto ypatybės
The Hbada P2 Pro Office Chair is designed with user comfort and practicality in mind, featuring:
- Adjustable Flip-Up Armrests: Armrests can be raised 90 degrees to save space, allowing the chair to be pushed under a desk.
- Ergonomic Mid-Back Design: The curved backrest supports the natural curve of your spine, providing effective back support and protecting your spinal health.
- Breathable Mesh Material: The backrest features skin-friendly and breathable mesh, ensuring comfort during long periods of use by preventing heat buildup.
- Thick Sponge Cushion: The seat cushion is filled with high-density sponge, offering gentle and comfortable support for your hips and thighs.
- 105-Degree Rocking Function: A built-in rocking mechanism allows for a slight recline, perfect for relaxing and changing posture during breaks.
- Patvari konstrukcija: Made with high-quality materials including a reinforced nylon resin base for extended product life and stability.
- Silent Casters: Designed for smooth movement with minimal noise and impact absorption.
4. Surinkimo instrukcijos
Assembly of the Hbada P2 Pro Office Chair is designed to be straightforward, typically taking around 15 minutes. Please follow these steps:
- Išpakuokite komponentus: Carefully remove all parts from the packaging. Verify that all components listed in the parts list are present.
- Pritvirtinkite ratukus prie pagrindo: Insert the silent casters into the reinforced nylon resin base.
- Įdėkite dujų keltuvą: Place the TUV-3 gas cylinder into the center hole of the base.
- Sėdynės mechanizmo surinkimas: Pritvirtinkite sėdynės mechanizmą prie sėdynės pagalvėlės apačios.
- Pritvirtinkite porankius: Secure the armrests to the seat cushion. Important: Do not fully tighten the screws for the armrests and backrest until all parts are loosely assembled. This allows for minor adjustments and ensures proper alignment.
- Pritvirtinkite atlošą: Connect the backrest to the armrests.
- Prijunkite sėdynę prie dujinio keltuvo: Surinktą sėdynę uždėkite ant dujinio keltuvo.
- Galutinis priveržimas: Once all parts are in place and aligned, gradually tighten all screws securely.
Image: Easy assembly process, typically completed within 20 minutes.
Image: Key components including the TUV-3 gas cylinder, sturdy nylon base, and silent casters.
5. Naudojimo instrukcijos
Familiarize yourself with the chair's adjustable features for optimal comfort:
- Aukščio reguliavimas: Locate the lever under the seat on the right side. Pull the lever up while seated to lower the chair, or pull it up while standing to raise the chair. Release the lever at your desired height.
- Atlenkiami porankiai: To raise the armrests, simply lift them upwards until they lock into a vertical position (90 degrees). To lower them, pull them down.
- Sūpavimo funkcija: Pull the lever located under the seat (usually on the left side) outwards to enable the rocking function. Push the lever inwards to lock the chair in an upright position. The chair allows for a 105-degree rocking motion.
- Rocking Tension Adjustment: A round knob located under the front of the seat allows you to adjust the tension of the rocking mechanism. Turn clockwise to increase tension (stiffer rock) and counter-clockwise to decrease tension (looser rock).
Image: Flip-up armrests in action, allowing the chair to be pushed under a desk.
Image: Rocking function and tension adjustment controls.
6. Priežiūra
Regular maintenance will prolong the life and appearance of your Hbada P2 Pro Office Chair:
- Valymas: Nuvalykite kėdę minkšta, damp cloth. For mesh areas, a gentle brush can be used to remove dust. Avoid harsh chemicals or abrasive cleaners.
- Patikrinkite tvirtinimo detales: Periodiškai patikrinkite visus varžtus ir veržles, ar jie gerai priveržti. Jei reikia, priveržkite, kad išlaikytumėte stabilumą ir saugumą.
- Ratukų priežiūra: Kad ratukai judėtų sklandžiai, laikykite juos be plaukų ir šiukšlių.
- Venkite tiesioginių saulės spindulių: Prolonged exposure to direct sunlight can fade upholstery and degrade plastic components.
7. Problemų sprendimas
If you encounter any issues with your Hbada P2 Pro Office Chair, please refer to the following common solutions:
- Kėdė nestabili / nestabili: Ensure all assembly screws are fully tightened. Check that the base is correctly attached to the gas lift.
- Aukščio reguliavimas neveikia: Verify that the gas lift lever is functioning correctly and not obstructed. Ensure the gas lift cylinder is properly seated in the base and seat mechanism.
- Rocking function not engaging/disengaging: Check the rocking lever position. If the tension is too high, adjust the rocking tension knob counter-clockwise.
- Ratukai sukasi nelygiai: Inspect casters for trapped debris (hair, lint) and clean them.
If the problem persists, please contact Hbada Customer Service for assistance.
8. Specifikacijos
| Atributas | Detalė |
|---|---|
| Prekės ženklas | Hbada |
| Modelio numeris | HDNY188WM-CB |
| Spalva | Baltas |
| Medžiagos | Breathable Mesh, High-Density Urethane Foam, Reinforced Nylon Resin Base |
| Bendri matmenys (P x G x A) | 60 cm x 60 cm x 91-100 cm (approx. 23.6 x 23.6 x 35.8-39.4 inches) |
| Sėdynės aukštis | 45-54 cm (approx. 17.7-21.3 inches) |
| Svoris | 12 kg (apie 26.5 svaro) |
| Statinė apkrova | Up to 120 kg (approx. 265 lbs) |
| Porankio tipas | Apvertimas |
| Siūbavimo kampas | Iki 105 laipsnių |
Paveikslėlis: Išsamūs gaminio matmenys.
9. Garantija ir palaikymas
Hbada is committed to providing high-quality products and excellent customer service.
- 3 metų garantija: Your Hbada P2 Pro Office Chair comes with a 3-year warranty, covering free exchange or repair for manufacturing defects.
- 30 dienų grąžinimo politika: Enjoy peace of mind with our 30-day return policy.
- Klientų aptarnavimas visą gyvenimą: Our dedicated customer service team is available to assist you with any questions or concerns you may have regarding your product.
For warranty claims, product inquiries, or any issues, please contact our customer service center with your purchase details.
Image: Hbada's commitment to quality, support, and reliable delivery.
