„Yaheetech YT7ji70001001“ vidurio amžiaus modernios PU odos akcentinės kėdės naudojimo instrukcija

1. Įvadas

This manual provides detailed instructions for the assembly, use, and maintenance of your Yaheetech Mid-Century Modern PU Leather Accent Chair. Please read all instructions carefully before assembly and use to ensure proper function and safety.

2. Saugos informacija

• For your safety, do not stand on this chair.
• Ensure the user weight does not exceed 300 pounds (136 kg).
• Visas dalis ir pakavimo medžiagas laikykite vaikams nepasiekiamoje vietoje.
• Reguliariai tikrinkite visus varžtus ir veržles, kad jie būtų priveržti.

3. Pakuotės turinys

Before beginning assembly, verify that all parts listed below are present. All assembly parts and tools are typically stored in a hidden compartment under the seat cushion.

3.1 paveikslas: Hidden compartment under the seat cushion. Open the hook and loop fastener to access parts.

Dalių sąrašas:

• Sėdynės pagalvėlė (1)
• Backrest Cushion (1)
• Left Armrest Frame (1)
• Right Armrest Frame (1)
• Front Leg Assembly (1)
• Rear Leg Assembly (1)
• Hardware Pack (screws, washers, Allen wrench, adjustable footpads, wooden plugs)

4. Surinkimo instrukcijos

Assembly is straightforward and typically takes about 20-40 minutes. An Allen wrench is provided, but a power drill with appropriate bit can expedite the process.

1. Paruoškite komponentus: Unpack all components and verify against the parts list. Locate the hardware pack within the hidden compartment under the seat cushion.
2. Pritvirtinkite atlošą prie sėdynės: Align the backrest cushion with the seat cushion. Secure them together using the provided screws. Ensure the Velcro flap on the underside of the backrest is open to access the screw holes.
3. Install Adjustable Footpads: Screw the adjustable footpads into the bottom of each leg of the wooden frame. These can be adjusted later to level the chair on uneven surfaces and protect your floor.
4. Attach Armrest Frames: Connect the left and right armrest frames to the assembled seat and backrest. Use the provided screws and washers. Ensure all connections are secure but do not overtighten until all pieces are aligned.
5. Final Tightening and Plugs: Once all components are in place and aligned, fully tighten all screws. Insert the wooden plugs into any visible screw holes on the outside of the wooden frame for a finished look.

5. Produkto ypatybės

• Aukščiausia konstrukcija: Built with a solid wood and manufactured wood frame, ensuring durability and stability. Capable of holding up to 300 lbs.
• Vidurio amžiaus modernus stilius: Yra mažai profesionalusfile seat, splayed legs, and brown faux leather upholstery, offering a stylish retro aesthetic.
• Supportive & Comfortable: Seat and backrest are generously stuffed with soft, high-density foam. The seat cushion is 5.5 inches thick with high-gauge sinuous springs for enhanced support.
• Ergonomiškas dizainas: The backrest is slightly reclined at 105 degrees for a relaxed posture, complemented by curved armrests for comfortable hand and arm support.
• Water-Resistant PU Leather: The faux leather upholstery is water-resistant and easy to clean, making it practical for everyday use.

5.1 paveikslas: Išsamus view of the wide plush back cushion, curved arm design, and sturdy metal connectors.

5.2 paveikslas: Illustration of the water-resistant PU leather, high-density foam, and 5.5-inch thick seat cushion.

5.3 paveikslas: Visual representation of the 105-degree ergonomic backrest and comfortable curved armrests.

6. Naudojimas ir išdėstymas

This accent chair is versatile and suitable for various indoor settings, adding a warm and charming tone to your space.

• Svetainė: Ideal for additional seating or creating a cozy reading nook.
• Miegamasis: Provides a comfortable spot for reading or relaxation.
• Office/Guestroom: Enhances the aesthetic and functionality of these spaces.
• Balcony/Reception Room: Suitable for indoor use in these areas.

6.1 paveikslas: The accent chair complementing a bedroom environment.

6.2 paveikslas: Two accent chairs providing comfortable seating in an indoor balcony setting.

7. Priežiūra ir priežiūra

• Valymas: Nuvalykite skelbimuamp skudurėliu. Venkite stiprių cheminių medžiagų ar abrazyvinių valiklių.
• Išsiliejimai: Due to its water-resistant PU leather, spills can be easily wiped away. Clean immediately to prevent staining.
• Bendra priežiūra: Periodically check and tighten all fasteners to maintain stability. Avoid prolonged exposure to direct sunlight to prevent fading of the upholstery.

8. Specifikacijos

8.1 paveikslas: Detailed dimensions of the accent chair, including height, width, depth, and cushion thickness.

9. Problemų sprendimas

• Slenkanti kėdė: Ensure all screws are securely tightened. Use the adjustable footpads on the bottom of the legs to compensate for uneven flooring.
• Sunkumai surinkimo metu: Refer to the illustrated instructions provided in the package. Ensure parts are correctly oriented before tightening screws. Do not overtighten screws until all components are loosely fitted.
• Trūksta dalių: Check the hidden compartment under the seat cushion thoroughly. If parts are still missing, contact Yaheetech customer support.

10. Garantija ir palaikymas

For warranty information or customer support, please refer to the contact details provided in your product packaging or visit the official Yaheetech websvetainę. Išsaugokite pirkimo čekį garantiniams reikalavimams.