ANENG PN200

ANENG PN200 skaitmeninis klamp Multimetro naudojimo instrukcija

Modelis: PN200

1. Produktas baigtasview

The ANENG PN200 is a versatile digital clamp meter multimeter designed for accurate measurement and troubleshooting of electrical systems. It combines the functions of a clamp meter and a multimeter, offering a wide range of measurement capabilities for both AC and DC circuits.

ANENG PN200 skaitmeninis klamp Meter showing multiple functions

Image: ANENG PN200 Digital Clamp Meter highlighting its multiple functions including AC/DC Voltage, AC/DC Current, Max Count, Backlit Screen, Hertz, Resistance, Capacitance, Diode/Buzzer, Data Retention, Automatic Shutdown, NCV, and Relative Measurement.

2. Pakuotės turinys

Your ANENG PN200 package includes the following items:

  • 1x ANENG PN200 Digital Clamp Metras
  • 2x AAA baterijos
  • 1x Combination Test Lead Set (includes 4 connection sockets, 2 PVC cables, 2 copper needles, 2 U-shaped inserts, 2 meter pens, 2 alligator clips, 2 puncture needles)
  • 1x Multimeter Test Lead Set
  • 1x įkrovimo laidas
  • 1x naudojimo instrukcija
  • 1x krepšys

3. Sąranka

3.1 Akumuliatoriaus įdėjimas

  1. Suraskite baterijų skyriaus dangtelį įrenginio gale.
  2. Nustumkite dangtelį, kad atidarytumėte skyrių.
  3. Įdėkite dvi AAA tipo baterijas, užtikrindami teisingą poliškumą (+/-).
  4. Stumkite baterijų skyriaus dangtelį atgal į vietą, kol jis tvirtai spragtelės.

3.2 Bandymo laidų prijungimas

  1. Už ttage, resistance, capacitance, diode, and continuity measurements, insert the black test lead into the 'COM' (common) jack.
  2. Insert the red test lead into the 'VΩHz' jack.
  3. Ensure connections are firm before use.

4. Naudojimo instrukcijos

The ANENG PN200 features a rotary dial for selecting measurement functions and dedicated buttons for additional features.

4.1 Funkcijos pasirinkimas

Pasukite sukamąjį ratuką, kad pasirinktumėte norimą matavimo funkciją:

  • V~: AC ttage matavimas
  • V-: DC ttage matavimas
  • A~: AC Current measurement (using clamp)
  • KAM-: DC Current measurement (using clamp)
  • Ω: Atsparumo matavimas
  • Hz: Dažnio matavimas
  • Talpa: Talpos matavimas
  • Diodas / tęstinumas: Diode test and Continuity check
  • NCV: Nekontaktinis ttage aptikimas

4.2 Pagrindinės funkcijos

  • H/HOLD: Short press to hold the current reading on the display. Long press to activate/deactivate the backlight.
  • REL: Used for relative measurement, setting the current reading as a reference point. For capacitance, press to zero out the meter before clamping.
  • NUSTATYTI: Used to switch between different sub-functions within a main dial setting (e.g., AC/DC for current, Diode/Continuity).

4.3 Specifiniai matavimai

Below are common measurement procedures:

AC/DC ttage Matavimas

  1. Turn the dial to 'V~' for AC voltage or 'V-' for DC voltage.
  2. Connect the test leads to the circuit points you wish to measure.
  3. Perskaitykite ttage reikšmė ekrane.

Kintamosios/nuolatinės srovės matavimas (Clamp)

  1. Turn the dial to 'A~' for AC current or 'A-' for DC current.
  2. Atidarykite klamp jaws and enclose a single conductor (not a bundle of wires).
  3. Nuskaitykite dabartinę vertę ekrane.
  4. Pastaba: For accurate DC current measurements, ensure to press the 'REL' button to zero out the meter before clamping.
ANENG PN200 skaitmeninis klamp Meter measuring high precision AC/DC current

Image: ANENG PN200 Digital Clamp Meter demonstrating high precision 600A AC/DC current measurement capability.

Resistance, Capacitance, Diode, Continuity, Frequency

  1. Turn the dial to the respective function symbol (Ω, Capacitance, Diode/Continuity, Hz).
  2. Connect the test leads to the component or circuit.
  3. For Diode/Continuity, use the 'SET' button to toggle between modes. A beep indicates continuity.
  4. For Capacitance, ensure the capacitor is discharged before measurement.
ANENG PN200 skaitmeninis klamp Meter showing various measurement functions

Image: ANENG PN200 Digital Clamp Meter displaying its comprehensive measurement capabilities including DC Voltage, AC ttage, Capacitance, Diode, Capacitive Discharge, and Resistance.

Nekontaktinis ttage (NCV) aptikimas

  1. Turn the dial to 'NCV'.
  2. Atneškite viršutinę cl dalįamp matuoklis šalia kintamosios srovės įtampos matuokliotage šaltinis.
  3. The meter will beep and an indicator light will illuminate if AC voltagaptinkamas e.
ANENG PN200 skaitmeninis klamp Meter performing NCV detection

Image: ANENG PN200 Digital Clamp Meter detecting non-contact induced electricity from a wall outlet.

4.4 Official Product Video Demonstration

Video: An official product video from ANENG Stores demonstrating various features and operations of the PN200 Digital Clamp Skaitiklis.

5. Priežiūra

5.1 Valymas

Prietaisą valykite sausa, minkšta šluoste. Nenaudokite abrazyvinių valiklių ar tirpiklių.

5.2 Akumuliatoriaus keitimas

If the low battery indicator appears on the display, replace the AAA batteries as described in the Setup section.

5.3 Saugykla

Laikykite klamp meter and its accessories in the provided storage bag in a cool, dry place away from direct sunlight and extreme temperatures.

6. Problemų sprendimas

  • Ask a question about this manual

    Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.