Yaheetech Model 592495 Dining Chairs (Set of 6) Instruction Manual

1. Įvadas

Thank you for choosing Yaheetech Dining Chairs. This manual provides detailed instructions for the proper assembly, safe use, and effective maintenance of your new dining chairs. Please read this manual thoroughly before assembly and retain it for future reference.

2. Saugos informacija

• Nestovėkite ant kėdės. Standing on the chair can lead to instability and potential injury.
• The maximum weight capacity for each dining chair is 136 kg (300 svaro). Exceeding this limit may compromise the chair's structural integrity and safety.
• Prieš naudodami įsitikinkite, kad visi varžtai ir veržlės yra tvirtai priveržtos. Periodiškai patikrinkite ir prireikus priveržkite tvirtinimo detales.
• Smulkias dalis ir pakavimo medžiagas laikykite vaikams nepasiekiamoje vietoje, kad išvengtumėte užspringimo pavojaus.
• Assemble the chairs on a soft, clean surface to prevent scratching the product or your floor.

3. Pakuotės turinys

Verify that all components are present before beginning assembly. If any parts are missing or damaged, please contact Yaheetech customer support.

• Dining Chair Backrest (6 units)
• Dining Chair Seat (6 units)
• Priekinės kojos (6 poros)
• Rear Legs (6 pairs)
• Aparatūros rinkinys (varžtai, poveržlės, šešiabriaunis raktas)
• Vartotojo vadovas (šis dokumentas)

3.1 pav. Baigtaview of six Yaheetech dining chairs.

4. Surinkimo instrukcijos

Assembly typically requires one person and approximately 15-20 minutes per chair. An Allen wrench is included in the hardware pack.

1. Pritvirtinkite kojas prie sėdynės: Carefully align the chair legs with the pre-drilled holes on the underside of the chair seat. Insert the screws with washers and hand-tighten them initially.
2. Pritvirtinkite atlošą: Connect the backrest to the seat frame, ensuring proper alignment. Insert screws and washers, hand-tightening them.
3. Balance and Tighten: Once all components are loosely assembled, stand the chair upright on a flat, level surface. Gently apply pressure to the seat to ensure all legs are balanced and touching the floor evenly. Then, securely tighten all screws using the provided Allen wrench. Do not overtighten.
4. Pėdų pagalvėlių reguliavimas: The front legs are equipped with adjustable foot pads. Rotate these pads to fine-tune the chair's stability and prevent wobbling on uneven floors.

Figure 4.1: Visual guide for chair assembly steps.

4.2 pav. Išsamus view of chair components and features.

5. Naudojimo instrukcijos

These dining chairs are designed for indoor use in dining rooms, kitchens, living rooms, and similar environments. Ensure the chair is placed on a stable, level surface before sitting. The ergonomically curved backrest is designed to provide comfortable support during use.

Figure 5.1: Yaheetech dining chairs in a kitchen environment.

6. Priežiūra

To maintain the appearance and longevity of your Yaheetech dining chairs, follow these care instructions:

• Valymas: Nuvalykite minkšta, damp cloth. Avoid harsh chemicals or abrasive cleaners, as these can damage the fabric and wood finish.
• Išsiliejimai: Išsiliejusius skysčius nedelsdami nuvalykite švaria, sausa šluoste. Netrinkite, nes dėmė gali išplisti.
• Saulės šviesa: Venkite ilgalaikio tiesioginių saulės spindulių poveikio, kad audinys neišbluktų.
• Patikra: Periodically inspect all fasteners and re-tighten if necessary to ensure stability.

7. Problemų sprendimas

If you encounter any issues with your dining chairs, refer to the following common solutions:

• Kėdės svyruoja: Check if all legs are evenly touching the floor. Adjust the foot pads on the front legs by rotating them until the chair is stable. Ensure all assembly screws are securely tightened.
• Loose Nailhead Trims: If any decorative nailhead trims become loose, gently push them back into place. If they continue to loosen, a small amount of fabric adhesive can be used to secure them.
• Cypimo garsai: Squeaking can often be resolved by re-tightening all assembly screws. If the issue persists, disassemble and reassemble the chair, ensuring all parts are correctly aligned.

8. Specifikacijos

Figure 8.1: Detailed dimensions of the dining chair.

9. Garantija ir palaikymas

For warranty information, missing parts, or any product-related inquiries, please contact Yaheetech customer support directly. Refer to your purchase documentation or the Yaheetech official websvetainė, kurioje rasite kontaktinius duomenis.

Gamintojas: Yaheetech