Aigo Rainbow Gaming PC Case User Manual

Įvadas

This manual provides essential instructions for the installation, operation, and maintenance of your Aigo Rainbow Gaming PC Case. Please read this guide thoroughly before beginning the assembly process to ensure proper setup and to maximize the lifespan of your components.

Produktas baigtasview

The Aigo Rainbow Gaming PC Case is designed to house your computer components, offering compatibility with various motherboard form factors and cooling solutions. It features a durable construction with an acrylic side panel for component visibility and efficient airflow.

Pagrindinės funkcijos:

• Formos faktorius: ATX
• Pagrindinės plokštės palaikymas: ATX, M-ATX, ITX
• Priekiniai I/O prievadai: 1 x USB 3.0, 2 x USB 2.0, Audio Jacks
• Panel Materials: SPCC Front Panel, Acrylic Side Panel
• Važiavimo įlankos: 2 x 2.5" SSD/HDD, 2 x 3.5" HDD
• Aušinimo palaikymas:
  • Rear Fan: 1 x 120mm (Fans not included)
  • Water Cooler: Rear 120mm, Side 120mm
• Component Clearance:
  • Maksimalus procesoriaus aušintuvo aukštis: 160 mm
  • Maksimalus GPU ilgis: 310 mm
• Apšvietimas: RGB (integrated into front panel design)

1 pav.: priekis view of the Aigo Rainbow Gaming PC Case. This image displays the front panel with its brushed texture and the distinctive diagonal RGB lighting element.

2 pav.: Kampinis view of the Aigo Rainbow Gaming PC Case. This perspective highlights both the front panel design and the transparent acrylic side panel, allowing a view into the case interior.

Sąrankos instrukcijos

Follow these steps to assemble your computer components within the Aigo Rainbow PC Case.

1. Prepare the Case:

1. Padėkite dėklą ant stabilaus, lygaus paviršiaus.
2. Carefully remove the acrylic side panel by unscrewing the four thumb screws located at each corner.
3. Remove any internal packaging materials.

3 pav.: šonas view of the Aigo Rainbow Gaming PC Case. This image shows the acrylic side panel, which can be removed for component installation.

2. Pagrindinės plokštės montavimas:

1. Įstatykite įvesties/išvesties skydą į galinę korpuso angą.
2. Align your ATX, M-ATX, or ITX motherboard with the standoffs inside the case.
3. Secure the motherboard with appropriate screws.

3. Maitinimo šaltinio įrengimas:

1. Mount your power supply unit (PSU) into the designated bay, typically at the bottom rear of the case.
2. Pritvirtinkite maitinimo bloką varžtais iš korpuso galo.

4. Drive Installation (HDD/SSD):

• For 3.5" HDDs: Locate the 3.5" drive bays and slide the drives into place, securing them with screws or tool-less mechanisms if available.
• For 2.5" SSDs/HDDs: Mount the 2.5" drives onto the dedicated mounting points, typically behind the motherboard tray or in specific drive cages, and secure with screws.

5. Vaizdo plokštės (GPU) diegimas:

1. Nuimkite reikiamus PCIe lizdų dangtelius nuo korpuso galo.
2. Įdėkite vaizdo plokštę į atitinkamą PCIe lizdą pagrindinėje plokštėje.
3. Secure the graphics card to the case with screws. Ensure the GPU length does not exceed 310mm.

6. Cooling System Installation (Fans/Water Cooler):

• Ventiliatoriai: Install 120mm fans in the rear position as needed. Note that fans are not included with this case.
• Water Cooler: If using a water cooler, install a 120mm radiator in the rear or side mounting positions.
• CPU aušintuvas: Įsitikinkite, kad procesoriaus aušintuvo aukštis neviršija 160 mm.

7. Kabelių valdymas:

Route all power and data cables through the designated cutouts and tie-down points behind the motherboard tray to ensure clean aesthetics and optimal airflow.

8. Connect Front Panel Cables:

Connect the front panel cables (USB 3.0, USB 2.0, Audio, Power Switch, Reset Switch, HDD LED, Power LED) to their corresponding headers on your motherboard. Refer to your motherboard manual for specific header locations.

Naudojimo instrukcijos

Once all components are installed and cables are connected, replace the side panel and secure it with the thumb screws. Connect your peripherals (monitor, keyboard, mouse) and power cable to the power supply. Press the power button on the front panel to start your system.

The integrated RGB lighting on the front panel will illuminate upon system power-on. Specific control over the RGB lighting, if available, will depend on your motherboard's RGB software or any integrated controller within the case (check for a dedicated button on the front I/O if applicable, though not specified for this model).

Priežiūra

Reguliarus techninis aptarnavimas padeda užtikrinti optimalų kompiuterio komponentų veikimą ir ilgaamžiškumą.

• Dulkių valymas: Periodically clean dust filters (if present) and the interior of the case using compressed air or a soft brush. Ensure the system is powered off and unplugged before cleaning.
• Panelių valymas: Wipe the acrylic side panel and front panel with a soft, damp cloth. Avoid abrasive cleaners that may scratch the acrylic.
• Kabelių tvarkymo patikrinimas: Retkarčiais patikrinkite laidų išdėstymą, kad įsitikintumėte, jog jie netrukdo oro srautui ar ventiliatoriaus veikimui.

Trikčių šalinimas

• Sistema neįsijungia:
  • Įsitikinkite, kad maitinimo šaltinis tinkamai prijungtas prie sieninio lizdo, o maitinimo jungiklis yra „ĮJUNGTA“ padėtyje.
  • Patikrinkite, ar visi maitinimo laidai iš maitinimo bloko yra tinkamai prijungti prie pagrindinės plokštės ir komponentų.
  • Check that the front panel power switch cable is correctly connected to the motherboard header.
• Nėra ekrano išvesties:
  • Confirm your monitor is connected to the graphics card (GPU) output, not the motherboard's integrated graphics output (unless you are using integrated graphics).
  • Įstatykite vaizdo plokštę į PCIe lizdą.
• Perkaitimo problemos:
  • Įsitikinkite, kad visi sumontuoti ventiliatoriai sukasi tinkamai.
  • Verify proper airflow direction (intake/exhaust).
  • Clean any dust buildup from fans and filters.

Specifikacijos

Figure 4: Dimensions of the Aigo Rainbow Gaming PC Case. This diagram illustrates the overall measurements of the case.

Garantija ir palaikymas

This Aigo Rainbow Gaming PC Case comes with a 12 mėnesių garantija nuo įsigijimo datos. Ši garantija taikoma gamybos defektams ir medžiagų trūkumams įprasto naudojimo metu. Ji netaikoma žalai, atsiradusiai dėl netinkamo naudojimo, nelaimingų atsitikimų, neleistinų modifikacijų ar netinkamo įrengimo.

For technical support or warranty claims, please contact your retailer or the manufacturer directly. Keep your proof of purchase for warranty validation.

Gamintojas: Aigo Darkflash