LOKITHOR J3250 PRO užvedimo laidininko naudotojo vadovas

1. Įvadas

The LOKITHOR J3250 PRO is a powerful and versatile LiFePO4 jump starter designed to provide reliable starting power for vehicles with up to 9.5L gasoline and 7.5L diesel engines. It also functions as a portable power bank and features an integrated LED flashlight. This manual provides essential information for safe and effective use, setup, operation, maintenance, and troubleshooting of your device.

2. Saugos informacija

Please read and understand all safety instructions before operating the LOKITHOR J3250 PRO. Failure to follow these instructions may result in electric shock, fire, or serious injury.

• Akių apsauga: Dirbdami su baterijomis, visada dėvėkite apsauginius akinius.
• Vėdinimas: Prietaisą naudokite gerai vėdinamoje vietoje.
• Vaikai: Prietaisą laikykite vaikams nepasiekiamoje vietoje.
• Trumpieji jungimai: Neleisti raudonos ir juodos spalvos klampliestų vienas kitą arba tą patį metalinį daiktą.
• Atvirkštinis poliškumas: Ensure correct polarity connection (red to positive, black to negative) to avoid damage. The device includes reverse-polarity protection.
• Drėgmė: Do not immerse the device in water. While it has an IP65 rating for water and dust resistance, it is not designed for submersion.
• Žala: Nenaudokite įrenginio, jei jis pažeistas. Kreipkitės pagalbos į klientų aptarnavimo tarnybą.
• Temperatūra: Do not expose the device to extreme heat or fire. Store within recommended temperature ranges.

The LOKITHOR J3250 PRO incorporates 10 safety protection technologies, including spark-proof, reverse-polarity, short-circuit, reverse-charge, low-temperature, high-temperature, over-voltage, apsauga nuo perkrovos, perkrovos ir viršsrovės.

3. Produktas baigtasview

3.1 Kas yra dėžutėje

• LOKITHOR J3250 PRO užvedimo blokas
• Trumpiklis starteris Clamps
• USB-A į USB-C laidas
• USB-C į USB-C laidas
• 12 V adapteris
• Priedų laikymo krepšys
• Vartotojo vadovas

Included components with the LOKITHOR J3250 PRO Jump Starter.

3.2 Pagrindinės savybės

• High Starting Current: Pateikia 3250 Amp peak current for reliable vehicle starting.
• Suderinamumas su varikliu: Suitable for gasoline engines up to 9.5 liters and diesel engines up to 7.5 liters.
• LiFePO4 akumuliatorių technologija: Offers over 2000 cycles at 100% depth of discharge, providing extended lifespan and enhanced chemical stability compared to traditional lead-acid or lithium-ion batteries.
• Pažangus saugumas: Features 10 types of protection, including spark-proof, mistake-proof, and reverse-polarity protection.
• 100 W dvipusis greitasis įkrovimas: Recharges the unit in approximately 60 minutes and can provide power output for USB-C devices.
• „ConnectMax“ technologija: Automatically detects clamp connection impedance to optimize starting efficiency.
• Nešiojamas maitinimo bankas: Provides 74.24Wh capacity with USB-A and USB-C outputs for charging phones, tablets, laptops, and other devices.
• 400-Lumen LED Flashlight: Includes multiple modes (constant, strobe, SOS) for emergency lighting.
• Patvarus dizainas: IP65 waterproof and dustproof rating, designed to operate in temperatures from -4°F to 140°F (-20°C to 60°C).
• Ilgas budėjimo laikas: Maintains charge for up to 42 months (1260 days) with minimal self-discharge.

The J3250 PRO provides 3250A peak current, suitable for large engines.

The device features an IP65 rating for water and dust resistance.

4. Sąranka ir įkrovimas

4.1 Pradinis įkrovimas

Before first use, fully charge the LOKITHOR J3250 PRO. This ensures optimal performance and extends battery life.

1. Connect the provided USB-C to USB-C cable to the jump starter's USB-C input port.
2. Connect the other end of the USB-C cable to a 100W Power Delivery (PD) compatible wall charger (not included) or use the included 12V adapter.
3. The display will show charging progress. A full charge typically takes about 60 minutes with a 100W PD charger.

4.2 Recharging the Device

It is recommended to recharge the jump starter after each use. If not used regularly, recharge the unit every 3-6 months to maintain battery health and readiness.

5. Naudojimo instrukcijos

5.1 Transporto priemonės užvedimas nuo kito akumuliatoriaus (įprastas režimas)

Use Normal Mode for vehicles with a partially discharged battery.

1. Pritvirtinkite Clamps: Prijunkite raudoną (+) jungtįamp to the positive terminal of the vehicle battery. Connect the black (-) clamp prie neigiamo automobilio akumuliatoriaus gnybto.
2. Maitinimas: Turn on the LOKITHOR J3250 PRO. The device will automatically detect the battery and prepare for jump starting.
3. Užvesti transporto priemonę: Užveskite savo transporto priemonę.
4. Power Off & Detach: Once the vehicle starts, power off the jump starter and immediately disconnect the clamps nuo transporto priemonės akumuliatoriaus.

Steps for jump starting a vehicle using Normal Mode.

5.2 Transporto priemonės užvedimas nuo kito akumuliatoriaus (pagreičio režimas)

Use Boost Mode for completely dead batteries where Normal Mode does not initiate a jump start.

1. Pritvirtinkite raudoną clamp: Prijunkite raudoną (+) jungtįamp prie teigiamo automobilio akumuliatoriaus gnybto.
2. Activate Boost: Long press the 'Boost' button on the jump starter for more than 5 seconds. The display will indicate Boost Mode is active.
3. Pritvirtinkite juodą clamp: Prijunkite juodą (-) jungtįamp prie neigiamo automobilio akumuliatoriaus gnybto.
4. Užvesti transporto priemonę: Start your vehicle within 30 seconds of activating Boost Mode.
5. Power Off & Detach: Once the vehicle starts, power off the jump starter and immediately disconnect the clamps nuo transporto priemonės akumuliatoriaus.

Steps for jump starting a vehicle using Boost Mode for completely dead batteries.

5.3 Naudojimas kaip nešiojamos išorinės baterijos

„J3250 PRO“ gali įkrauti įvairius elektroninius prietaisus.

• Connect your device to the USB-A output port (12V/1.5A, 18W QC) or the USB-C output port (20V/5A, 100W PD).
• Įrenginys automatiškai pradės krautis.

The J3250 PRO can charge multiple electronic devices.

5.4 LED žibintuvėlio naudojimas

The integrated 400-lumen LED flashlight provides illumination and emergency signaling.

• Press the flashlight button once for constant illumination.
• Press again to cycle through Strobe and SOS modes.
• Paspauskite ketvirtą kartą, kad išjungtumėte žibintuvėlį.

The 400-lumen LED flashlight offers multiple modes for various situations.

6. Priežiūra

• Reguliariai įkraukite: To prolong battery life, recharge the unit after each use. If stored, recharge every 3-6 months.
• Saugykla: Store the jump starter in a cool, dry place, away from direct sunlight and moisture. The device has a standby time of up to 42 months when fully charged.
• Valymas: Clean the exterior of the device with a soft, dry cloth. Do not use harsh chemicals or abrasive materials.
• Clamp Priežiūra: Įsitikinkite, kad klamps are clean and free of corrosion for optimal connection.

The J3250 PRO maintains charge for up to 42 months in standby.

7. Problemų sprendimas

If you encounter issues with your LOKITHOR J3250 PRO, refer to the following common troubleshooting steps:

• Įrenginys neįsijungia: Ensure the device is charged. If the battery is completely depleted, charge it for at least 15-30 minutes before attempting to power on.
• Vehicle Not Starting (Normal Mode):
  • Patikrinkite, ar klampyra tvirtai prijungti prie tinkamų akumuliatoriaus gnybtų (raudonas prie teigiamo, juodas prie neigiamo).
  • Įsitikinkite, kad automobilio akumuliatoriaus gnybtai yra švarūs ir be korozijos.
  • If the vehicle battery is completely dead, try using Padidinimo režimas.
• Vehicle Not Starting (Boost Mode): Ensure the Boost Mode was activated correctly (long press for 5 seconds) and the vehicle was started within 30 seconds.
• Clamps Sparking: This is normal if the clamps are connected incorrectly or if there is a poor connection. Ensure proper connection and clean terminals. The device has spark-proof protection.
• Prietaiso perkaitimas: The device has high-temperature protection. If it feels excessively hot, disconnect it and allow it to cool down before further use.
• Įkrovimo problemos: Ensure the charging cable and adapter are functioning correctly and are compatible with 100W PD for fast charging.

Jei problemos išlieka, susisiekite su LOKITHOR klientų aptarnavimo tarnyba.

8. Specifikacijos

The J3250 PRO is designed to operate in a wide range of temperatures.

9. Garantija ir palaikymas

LOKITHOR products are designed for reliability and performance. For warranty information, product registration, or technical support, please refer to the official LOKITHOR websvetainėje arba susisiekite tiesiogiai su jų klientų aptarnavimo skyriumi. Išsaugokite pirkimo kvitą kaip pirkimo įrodymą garantijos pretenzijoms.

If you have any after-sales questions, please feel free to contact us.