Akia Screens 101-inch Motorized Floor Rising Projector Screen User Manual

Produktas baigtasview

The Akia Screens 101-inch Floor Rising Projector Screen is a motorized projection solution designed for environments where wall or ceiling installations are not feasible. It features an advanced CineGrey 4D Ambient Light Rejecting (ALR) material that enhances image quality by rejecting ambient light. This screen is suitable for standard throw projectors and offers a large viewing area for cinematic experiences.

Figure 1: Akia Screens 101-inch Floor Rising Projector Screen in use.

Pagrindinės funkcijos:

• Floor-Rising Motorized Design: Provides a non-invasive projection solution, ideal for various room setups.
• Advanced CineGrey 4D ALR Material: Rejects up to 63% of ambient light for superior contrast and vivid images in moderately lit rooms.
• 101-Inch HD Display (16:9 Format): Offers a 49.5" H x 88" W viewzonoje.
• ISF sertifikuota: Ensures accurate color reproduction and balanced brightness.
• Tab-Tensioned Design: Maintains a taut and ripple-free projection surface.
• Lengvas nustatymas: Plug-and-play operation with included RF/IR remotes, manual switch, and USB trigger.
• Saugos savybės: Includes anti-pinch safety and overheat protection.

Sąrankos instrukcijos

Išpakavimas ir išdėstymas:

1. Carefully remove the projector screen from its packaging. Retain all packaging materials for future transport or storage.
2. Place the screen's aluminum base on a flat, stable surface in your desired viewing location. Ensure there is sufficient space for the screen to rise and lower without obstruction.
3. Position the screen to align with your projector's throw distance and angle. This screen is designed for standard (long) throw projectors and is not compatible with Ultra Short Throw (UST) projectors.

Maitinimo jungtis:

• Connect the power cord to the screen's power input and then to a standard electrical outlet. No hardwiring is required.

Nuotolinio valdymo pulto sąranka:

• Insert the provided batteries into the RF (Radio Frequency) and IR (Infrared) remote controls.
• The screen is ready for operation with the remotes immediately after power connection.

USB Trigger Connection (Optional):

• For automatic synchronization with your projector's power cycle, connect the included USB trigger cable to the screen's USB trigger port and to a compatible USB port on your projector. The screen will automatically deploy when the projector is turned on and retract when it is turned off.

Figure 2: Remote controls and USB trigger for screen operation.

Naudojimo instrukcijos

Using the Remote Controls:

• RF nuotolinio valdymo pultas: Offers omni-directional control, allowing operation from anywhere in the room without direct line-of-sight to the screen.
• IR nuotolinis valdymas: Requires direct line-of-sight to the IR receiver on the screen's base for operation.
• Paspauskite Rodyklė AUKŠTYN button to raise the screen.
• Paspauskite Rodyklė žemyn button to lower the screen.
• Paspauskite STOP mygtukas (usually a square or circle) to pause the screen at any desired height.

Using the Manual Switch:

• A manual control switch is located on the screen's base. Use this switch to raise, lower, or stop the screen if remote controls are unavailable or batteries are depleted.

Automatic Operation (with USB Trigger):

• If the USB trigger is connected, the screen will automatically deploy when your projector is powered on and retract when the projector is powered off.

Video 1: Demonstration of the motorized floor rising projector screen in operation, highlighting its tab-tensioned design and ambient light rejection capabilities.

Priežiūra

Ekrano paviršiaus valymas:

• To clean the CineGrey 4D screen surface, gently wipe with a soft, lint-free cloth dampužpilama vandeniu.
• Įsisenėjusioms dėmėms galima naudoti švelnų muilo tirpalą, o po to nuvalyti švaria šluoste.amp audinys.
• Do not use abrasive cleaners, solvents, or harsh chemicals as these can damage the screen material.
• Avoid touching the screen surface directly with bare hands to prevent oil transfer.

Housing and Mechanism:

• Wipe the aluminum housing with a dry or slightly damp šluoste dulkėms pašalinti.
• Reguliariai tikrinkite, ar maitinimo laidas nėra pažeistas.
• The internal motorized mechanism is designed for maintenance-free operation. Do not attempt to lubricate or disassemble the motor or scissor-backed risers.

Figure 3: The scissor-backed mechanism and tab-tensioned screen ensure a flat viewpaviršius.

Trikčių šalinimas

Specifikacijos

Figure 4: Product dimensions and viewzonoje.

Garantija ir palaikymas

Gamintojo garantija:

This product comes with a manufacturer's warranty provided by an ISO9001 certified manufacturer since 2008. Please refer to the warranty card included with your product for specific terms and conditions.

Techninė pagalba:

Akia Screens offers lifetime technical support via email, web chat, or toll-free phone calls. Our U.S. based professional service team is available to assist with any questions or issues you may encounter.

• Pagalba el. paštu: Available for detailed inquiries.
• Tiesiogiai Web Pokalbis: For immediate assistance.
• Nemokamas telefonas: Contact our U.S. based support team.

Figure 5: Akia Screens customer support and warranty information.