BLS LED Motion Sensor Light (Model T52) Instruction Manual

1. Produktas baigtasview

The BLS LED Motion Sensor Light provides convenient, automatic illumination for various indoor spaces. Featuring 52 super bright LEDs, a rechargeable battery, and versatile installation options, it enhances visibility and safety in dark areas.

Pagrindinės funkcijos:

• Super ryškus apšvietimas: Equipped with 52 LEDs, delivering 260 Lumens of 6000K cool white light. The light is dimmable and designed to be glare-free.
• Belaidis ir įkraunamas: Powered by an 1800mAh lithium battery, rechargeable via USB-C in approximately 2 hours. Provides 1.5 to 2 months of use with typical activation.
• Intelligent Motion Sensor: Features 4 operating modes: Auto Night, Auto Day & Night, Always ON, and OFF. Detects motion within 10 feet and a 120° range. Utilizes "Constant-Sense" technology to remain on as long as motion is detected, turning off 20 seconds after inactivity.
• Easy & Versatile Installation: Built-in magnet allows direct attachment to iron surfaces. For non-iron surfaces, use the included magnetic strip with 3M adhesives. No tools, wires, screws, or nuts required.
• Sleek & Ultra-Thin Design: Crafted with a durable aluminum body, only 0.36 inches thick, ensuring a discreet and modern appearance.

2. Pakuotės turinys

Atidarę pakuotę turėtumėte rasti šiuos elementus:

• BLS LED Motion Sensor Light (2 units)
• USB-C Charging Cable (1 unit, often dual-headed for simultaneous charging)
• Magnetic Strips with 3M Adhesives (2 units)
• Vartotojo vadovas

3. Sąranka ir diegimas

The BLS LED Motion Sensor Light offers a simple, tool-free installation process.

Charging Before First Use:

It is recommended to fully charge the lights before their initial use. Connect the provided USB-C cable to the charging port on the light and plug the other end into a USB power source. A red indicator light will show during charging, turning green when fully charged (approximately 2 hours).

Vaizdas: The light features a USB-C charging port and indicator lights (red for charging, green for full charge).

Diegimo būdai:

1. Tiesioginis magnetinis tvirtinimas: If your desired installation surface is made of iron (e.g., a metal shelf, refrigerator), the light can be directly attached using its built-in magnets.
2. Lipni magnetinė juostelė: For non-iron surfaces (e.g., wood cabinets, walls), use the provided magnetic strips.
   • Clean the surface where you intend to install the light.
   • Peel off the protective film from one side of the 3M adhesive on the magnetic strip.
   • Firmly press the adhesive side of the magnetic strip onto the clean surface.
   • Attach the LED light to the magnetic strip. The built-in magnets will hold it securely.

Vaizdas: Illustration of the two installation methods: direct magnetic attachment to iron surfaces or using the adhesive magnetic strip for other surfaces.

4. Naudojimo instrukcijos

The BLS LED Motion Sensor Light features a single button to cycle through its operating modes and adjust brightness.

Veikimo režimai:

Press the button to cycle through the following 4 modes:

• AUTO Night Mode (Red Indicator): The light will only turn on when it detects motion in dark or very dim conditions. Ideal for kitchens, hallways, or stairs at night.
• AUTO Day & Night Mode (Green Indicator): The light will turn on when it detects motion, regardless of ambient light conditions (day or night). Great for closets, cabinets, and storage areas.
• ON Mode (Blue Indicator): The light stays continuously on. Useful for campkaip avarinė lemputė.
• OFF Mode (No Indicator): Šviesa išjungta.

Vaizdas: Visual representation of the three main operating modes: Night Auto, Day & Night Auto, and Always On.

Vaizdas: Detailed explanation of the Day & Night Motion Sensor Mode and Night Mode applications.

Ryškumo reguliavimas:

To adjust the brightness, press and hold the button while the light is ON. Release the button when the desired brightness level is reached.

5. Priežiūra

To ensure optimal performance and longevity of your BLS LED Motion Sensor Light, follow these maintenance guidelines:

• Įkrovimas: Recharge the light when the indicator light turns red or when you notice a decrease in brightness. A full charge takes approximately 2 hours.
• Valymas: Wipe the light gently with a soft, dry cloth. Avoid using abrasive cleaners or solvents.
• Saugykla: Jei šviestuvą ketinate laikyti ilgesnį laiką, įsitikinkite, kad jis yra visiškai įkrautas ir laikomas vėsioje, sausoje vietoje.

6. Specifikacijos

7. Garantija ir palaikymas

BLS siūlo a 2 metų garantija ir Lifelong Service for this product. If you encounter any issues or have questions, please contact customer service via blsled4u@gmail.com. Please include your order ID for faster assistance.