MFSTUDIO 8-Piece Patio Dining Set Instruction Manual

Įvadas

Thank you for choosing the MFSTUDIO 8-Piece Patio Dining Set. This set includes a 60-inch rectangular dining table, six stackable chairs, and a 13ft double-sided patio umbrella. Designed for outdoor use, this set offers durability and comfort for your patio, garden, or deck. Please read this manual carefully before assembly and use to ensure proper setup and longevity of your product.

Image: Complete MFSTUDIO 8-Piece Patio Dining Set.

Saugos informacija

• Always assemble the product on a soft, non-abrasive surface to prevent scratches.
• Prieš naudodami įsitikinkite, kad visi varžtai ir veržlės yra tvirtai priveržtos.
• Do not overload chairs; maximum weight capacity is 300 lbs per chair.
• For the umbrella, always close and fasten it when not in use, especially during windy or rainy conditions, to prevent damage and ensure safety.
• Laikykite vaikus ir naminius gyvūnus toliau nuo surinkimo zonos.

Pakuotės turinys

Please verify that all parts are present before beginning assembly.

• 1 x stačiakampis valgomojo stalas (60 cm ilgio x 38 cm pločio x 28 cm aukščio)
• 6 x Stackable Chairs (L25.2" x W22.8" x H35", Seat height: 16.5")
• 1 x Double-Sided Patio Umbrella (13ft L x 6.5ft W x 7.8ft H)
• Surinkimo aparatūros rinkinys

Sąrankos instrukcijos

Assembly is required for this dining set. It is recommended to have two people for assembly.

1. Stalo surinkimas

1. Unpack all table components and lay them on a protected surface.
2. Attach the table legs to the tabletop using the provided bolts and tools. Ensure all connections are firm.
3. Atsargiai apverskite stalą vertikaliai.

Image: Rectangular table with slatted design and umbrella hole.

2. Pirmininkų susirinkimas

1. For each chair, attach the backrest to the seat frame, then attach the legs.
2. Tighten all screws evenly until the chair is stable.

Vaizdas: Išsamus view of a stackable dining chair.

3. Umbrella Setup

1. Insert the umbrella pole into the center hole of the dining table.
2. Ensure the umbrella pole is securely seated. (Umbrella base is not included and must be purchased separately for stability).

Naudojimo instrukcijos

Skėčio operacija

The umbrella features an ergonomic crank handle for easy opening and closing, and an auto-tilt function.

1. Norėdami atidaryti: Turn the crank handle clockwise until the umbrella canopy is fully extended.
2. Pakreipti: Continue turning the crank handle clockwise after the umbrella is fully open. The canopy will automatically tilt to your desired angle. To adjust the tilt, turn the crank counter-clockwise to bring it back to the upright position, then clockwise again to tilt in a different direction.
3. Uždaryti: Turn the crank handle counter-clockwise until the canopy is fully retracted. Secure the canopy with the attached strap.

Image: Close-up of the umbrella crank and tilt mechanism.

Stacking Chairs

The chairs are designed to be stackable for convenient storage and to optimize space when not in use.

1. Lift one chair and carefully place it on top of another chair, aligning the legs and seats.
2. Ensure the chairs are stable when stacked to prevent tipping.

Image: Stacked chairs demonstrating space-saving feature.

Priežiūra

• Valymas: Nuvalykite paviršius skelbimuamp cloth for general cleaning. For stubborn dirt, use a mild soap solution and rinse thoroughly. Dry with a clean, dry cloth.
• Stabilumo patikrinimas: Regularly check the stability of all components. Tighten any loose screws or bolts as needed to maintain structural integrity.
• Skėčių priežiūra: Keep the umbrella clean and dry when not in use. Store it in a protected area during harsh weather conditions or off-season to prolong its lifespan.
• Rėmo apsauga: The metal frame features an e-coating for rust and weather resistance. Avoid using abrasive cleaners or tools that could damage this protective layer.

Image: Diagram illustrating the multi-layer e-coating for durability.

Trikčių šalinimas

• Svirduliuojantis stalas / kėdės: Check all assembly bolts and screws. Tighten them firmly and evenly. Ensure the furniture is on a flat, stable surface.
• Skėtis sklandžiai neatsidaro / neužsidaro: Inspect the crank mechanism for any obstructions. Ensure the pole is correctly inserted and not bent.
• Umbrella Tipping: An umbrella base is crucial for stability. Ensure you are using an appropriate, weighted base (not included) for the umbrella size. Always close the umbrella in windy conditions.

Specifikacijos

Image: Diagram showing the dimensions of the table, chairs, and umbrella.

Garantija ir palaikymas

Grąžinimo politika: Šiam produktui taikoma 30 dienų pinigų grąžinimo / pakeitimo grąžinimo politika nuo įsigijimo datos.

For further assistance, missing parts, or warranty claims, please contact MFSTUDIO customer support. Refer to your purchase documentation for specific contact details.