FULODE MIX-8 8-Channel Professional Audio Mixer Sound Board Console Instruction Manual

1. Įvadas

This manual provides detailed instructions for the FULODE MIX-8 8-Channel Professional Audio Mixer Sound Board Console. Please read this manual thoroughly before operating the device to ensure proper usage and to maximize its performance and longevity. The MIX-8 is designed for various audio applications, including live performances, studio recording, and DJ events, offering versatile connectivity and sound processing capabilities.

2. Saugos informacija

• Elektros sauga: Always connect the power adapter to a grounded outlet. Do not expose the unit to rain or moisture. Do not remove covers; refer servicing to qualified personnel.
• Vėdinimas: Užtikrinkite tinkamą vėdinimą aplink įrenginį, kad jis neperkaistų.
• Vieta: Place the mixer on a stable, flat surface. Avoid placing it near heat sources or in direct sunlight.
• Valymas: Valymui naudokite minkštą, sausą šluostę. Nenaudokite skystų valiklių ar aerozolių.
• Maitinimas: Use only the specified power supply (AC 90-240V, 50-60Hz).

3. Pakuotės turinys

Upon unboxing your FULODE MIX-8, please verify that all the following items are included:

• FULODE MIX-8 Audio Mixer Console
• Maitinimo adapteris
• Vartotojo vadovas (šis dokumentas)

4. Produktas baigtasview

The FULODE MIX-8 is an 8-channel professional audio mixer equipped with a 99-bit DSP digital processor, USB and Bluetooth connectivity, and 48V phantom power. It features individual 3-band equalization for each channel and a 7-band master equalization for comprehensive sound control.

Vaizdas: Iš viršaus į apačią view of the FULODE MIX-8 8-channel audio mixer, displaying all knobs, faders, and input/output ports.

4.1 Front & Rear Panel Layout

Image: Detailed diagram of the FULODE MIX-8 mixer's front and rear panels, labeling all inputs, outputs, controls, and features.

• Įvesties kanalai (1–8): Each channel features XLR/TRS combo jacks for microphone (MIC) or line-level (LINE IN) inputs.
• Fantominė galia (+48 V): Individual phantom power switches for condenser microphones on each channel.
• Stiprinimo reguliavimas: Controls input sensitivity for each channel.
• 3 juostų EQ: High, Mid, and Low frequency adjustments for each channel.
• Pan Balance: Reguliuoja kanalo stereofoninę poziciją.
• AUX Adjustment: Controls the amount of signal sent to auxiliary outputs.
• Channel Mute Switch: Mutes individual channels.
• Channel Volume Pusher: Fader for individual channel volume control.
• Digital Multi-Effects (DSP FX): Built-in 99 DSP effects with program selection and parameter adjustment.
• 7-Band Stereo Graphic Equalizer: Master EQ for overall sound shaping.
• USB/MP3 Player: Digital display for U disk playback, with controls for play/pause, song switching, and mode selection.
• Bluetooth ryšys: Wireless connection for audio input from smart devices.
• Main Outputs (L/R): XLR and 6.5mm (1/4") jack outputs for connecting to ampkeltuvai arba maitinami garsiakalbiai.
• Ausinių išvestis: Garso stebėjimui.
• Power Switch & Interface: Įsikūręs galiniame skydelyje.

5. Sąranka

5.1 Maitinimo jungtis

1. Įsitikinkite, kad maišytuvo maitinimo jungiklis yra IŠJUNGTOJE padėtyje.
2. Connect the provided power adapter to the mixer's power interface on the rear panel.
3. Plug the power adapter into a suitable AC 90-240V, 50-60Hz power outlet.
4. Maišytuvą įjunkite naudodami maitinimo jungiklį.

Vaizdas: Galinis view of the FULODE MIX-8 mixer, showing the power input, power switch, and serial number label.

5.2 Įvesties jungtys

The MIX-8 supports various input types:

• Mikrofonai: Connect XLR microphones to the XLR inputs on channels 1-8. For condenser microphones, activate the +48V phantom power switch for the respective channel.
• Linijinio lygio įrenginiai: Prijunkite instrumentus (pvz., klavišinius, gitaras su priekine jungtimi)amps) or other audio devices using 1/4" TRS or TS cables to the LINE IN inputs.
• USB atkūrimas: Įkiškite USB atmintinę į USB prievadą, kad galėtumėte atkurti MP3 failus.
• Bluetooth: Pair your smart device via Bluetooth for wireless audio input.

Image: Close-up of the FULODE MIX-8 mixer's input section, showing XLR and 1/4 inch jack connections for microphones and line-level devices, with phantom power indicators.

5.3 Išvesties jungtys

• Pagrindiniai išėjimai: Connect the XLR or 6.5mm (1/4") MAIN OUT jacks to your amplifier, maitinami garsiakalbiai arba įrašymo sąsaja.
• Ausinių išvestis: Prijunkite ausines prie PHONES lizdo stebėjimui.

6. Naudojimo instrukcijos

6.1 Kanalų valdymas

Each input channel (1-8) has dedicated controls:

• GAUTIS: Adjust this knob to set the input level for the connected device. Aim for a strong signal without clipping (distortion).
• EQ (aukštas, vidutinis, žemas): Use these three knobs to adjust the treble, midrange, and bass frequencies of the individual channel.
• AUX: Controls the amount of signal sent to the auxiliary output.
• FX: Adjusts the amount of signal sent to the internal DSP effects processor.
• PAN: Positions the channel's sound in the stereo field (left to right).
• Nutildyti: Press the MUTE button to silence the channel. The corresponding LED will illuminate when muted.
• Kanalo faderis: Adjusts the overall volume level of the individual channel.

Image: Close-up of the FULODE MIX-8 mixer's channel controls, showing individual gain, EQ, AUX, FX, PAN knobs, and mute buttons.

6.2 DSP Effects (FX)

The MIX-8 features 99 built-in DSP effects. To select and apply effects:

1. Use the PROGRAM knob to scroll through the 99 available effects, displayed on the digital screen.
2. Press the PROGRAM knob to confirm your selection.
3. Adjust the FX knob on each channel to send the desired amount of signal to the effects processor.
4. Use the dedicated FX return fader to control the overall volume of the applied effects.

Image: Close-up of the FULODE MIX-8 mixer's digital multi-effects section, showing the display, program knob, and FX level controls.

6.3 7-Band Stereo Graphic Equalizer

The master 7-band graphic equalizer allows for fine-tuning the overall output sound:

• Adjust the faders for each frequency band (e.g., 63Hz, 150Hz, 400Hz, 1KHz, 2.5KHz, 6.4KHz, 12KHz) to boost or cut specific frequencies in the main mix.

Image: Close-up of the FULODE MIX-8 mixer's 7-band stereo graphic equalizer, showing the faders for frequency adjustment.

6.4 USB/MP3 Playback and Recording

The integrated USB player supports MP3 files and can also function as a sound card for PC recording:

• Atkūrimas: Insert a USB flash drive. Use the MENU button to navigate, and the Play/Pause/Switch songs buttons for control.
• Įrašymas į kompiuterį: Connect the mixer to a computer via USB. The mixer will be recognized as an audio interface, allowing you to record the mixed output directly to your computer.

Image: The FULODE MIX-8 mixer connected to a laptop via USB for recording and playback, with a USB drive inserted.

6.5 Belaidis „Bluetooth“ ryšys

Norėdami prijungti Bluetooth įrenginį:

1. Press the MODE button on the USB/MP3 player section until "BT" or "Bluetooth" is displayed.
2. On your smart device, search for "BT-5.0" or a similar device name and pair.
3. Once connected, audio from your device will play through the mixer. Use the mixer's controls to adjust volume and effects.

Image: Bluetooth connectivity with the FULODE MIX-8 mixer, showing a smartphone connected wirelessly.

6.6 Stebėjimas

Use the PHONES output and its dedicated volume control to monitor the main mix through headphones.

7. Priežiūra

• Valymas: Regularly wipe the mixer's surface with a soft, dry cloth. Avoid using abrasive cleaners or solvents.
• Apsauga nuo dulkių: Kai nenaudojate, laikykite maišytuvą uždengtą, kad nesikauptų dulkės, kurios gali paveikti garso reguliatorius ir rankenėles.
• Saugykla: Store the mixer in a cool, dry place away from extreme temperatures and humidity.
• Kabelių valdymas: Ensure all cables are neatly organized and not under tension to prevent damage to ports.

8. Problemų sprendimas

• Nėra garso išvesties:
  • Patikrinkite visas maitinimo jungtis ir įsitikinkite, kad maišytuvas įjungtas.
  • Verify that main output faders and channel faders are raised.
  • Ensure no channels are muted (check MUTE LEDs).
  • Confirm that input devices are properly connected and producing a signal.
  • Check connections to speakers/amplifiers and their power/volume.
• Hum or Hissing Noise:
  • Įsitikinkite, kad visi laidai yra tvirtai prijungti ir nepažeisti.
  • Patikrinkite, ar nėra įžeminimo kilpų; pabandykite visą garso įrangą prijungti prie to paties maitinimo lizdo.
  • Reduce gain levels on channels and main output if the noise is excessive.
  • Ensure phantom power is only activated for condenser microphones.
• Nėra „Bluetooth“ ryšio:
  • Ensure the mixer is in Bluetooth mode (BT displayed).
  • Check that your smart device's Bluetooth is enabled and within range (approx. 33ft).
  • Pabandykite atjungti ir vėl susieti įrenginį.
• USB atkūrimo problemos:
  • Ensure the USB drive is formatted correctly and contains compatible MP3 files.
  • Išbandykite kitą USB diską.

9. Specifikacijos

10. Garantija ir palaikymas

FULODE products are manufactured to high-quality standards. For warranty information, please refer to the specific terms provided at the time of purchase or contact FULODE customer support. In case of any issues or questions regarding your MIX-8 mixer, please contact the FULODE Official Shop directly for assistance.

Note: Any operation error may cause the device to have no sound. Please refer to the troubleshooting section or contact support if issues persist.

11. Oficialus produkto vaizdo įrašas