Swiss Pro+ SP-FLC800W Electric Carpet Cleaner

Svarbios saugos instrukcijos

Prieš naudodami šį prietaisą, atidžiai perskaitykite visas instrukcijas. Nesilaikant šių instrukcijų, gali kilti elektros smūgis, gaisras arba sunkūs sužalojimai.

• Visada prijunkite prie tinkamai įžeminto lizdo.
• Nemerkite prietaiso į vandenį ar kitus skysčius.
• Do not use with a damaged cord or plug. If the cord is damaged, it must be replaced by the manufacturer, its service agent, or similarly qualified persons to avoid a hazard.
• Nenaudokite degiems ar degiems skysčiams, pvz., benzinui, surinkti arba nenaudokite vietose, kur jų gali būti.
• Plaukus, laisvus drabužius, pirštus ir visas kūno dalis laikykite toliau nuo angų ir judančių dalių.
• Ištraukite kištuką iš elektros lizdo, kai nenaudojate ir prieš valydami ar remontuodami.
• Naudokite tik taip, kaip aprašyta šiame vadove. Naudokite tik gamintojo rekomenduojamus priedus.
• Neleisti naudoti kaip žaislo. Būtinas didelis dėmesys, kai naudojasi vaikai arba jie yra šalia jų.
• Laikykite prietaisą sausoje vietoje patalpoje.

Produktas baigtasview ir pakuotės turinį

Familiarize yourself with the components of your Swiss Pro+ SP-FLC800W Electric Carpet Cleaner.

Vaizdas: Baigėsiview of the Swiss Pro+ SP-FLC800W Electric Carpet Cleaner and its included accessories. This image displays the main body of the cleaner, the detachable handle, the clean water tank, the dirty water tank, and a bottle of carpet shampoo. Each component is shown separately for clear identification.

Jūsų pakuotėje turėtų būti šie elementai:

• Main Carpet Cleaner Unit
• Nuimama rankena
• Švaraus vandens bakas (3.5 l talpos)
• Nešvaraus vandens bakas (3 l talpos)
• Kilimas Shampoo butelis
• Vartotojo vadovas (šis dokumentas)

Sąranka

1. Įrenginio surinkimas

1. Atsargiai išimkite visus komponentus iš pakuotės.
2. Insert the handle into the main body of the carpet cleaner until it clicks securely into place. Ensure it is firmly attached.
3. Place the clean water tank into its designated slot on the main unit.
4. Place the dirty water tank into its designated slot on the main unit.

2. Švaraus vandens bako pildymas

1. Išimkite švaraus vandens baką iš įrenginio.
2. Unscrew the cap or open the filling port.
3. Fill the tank with warm tap water (max 40°C / 104°F) up to the indicated MAX fill line.
4. Add the recommended amount of Swiss Pro+ carpet shampoo (or a compatible low-foaming carpet cleaning solution) to the water tank. Refer to the shampoo bottle for specific dilution instructions.
5. Securely close the cap/filling port and place the clean water tank back onto the main unit.

Vaizdas: A person demonstrating the use of the Swiss Pro+ SP-FLC800W carpet cleaner on a rug. The clean water tank is visible, filled with cleaning solution, indicating the unit is ready for operation.

Naudojimo instrukcijos

1. Preparing the Area

• Kruopščiai išsiurbkite kilimą, kad pašalintumėte nešvarumus ir šiukšles.
• Move furniture out of the area to be cleaned.
• Test a small, inconspicuous area of the carpet for colorfastness before full use.

2. Valymo procesas

1. Įjunkite maitinimo laidą į įžemintą elektros lizdą.
2. Turn on the carpet cleaner using the power switch.
3. Press the solution trigger on the handle and make a slow, forward wet pass over the carpet.
4. Release the solution trigger and make a slow, backward dry pass over the same area to extract the dirty water.
5. Overlap each cleaning path by several inches to ensure thorough cleaning.
6. Continue cleaning in sections until the entire area is complete.
7. For heavily soiled areas, repeat the wet and dry passes as needed.

3. Nešvaraus vandens bako ištuštinimas

• When the dirty water tank reaches its MAX fill line, or when you notice a decrease in suction, turn off and unplug the unit.
• Išimkite nešvaraus vandens baką iš įrenginio.
• Carefully open the tank and pour the dirty water into a sink or drain.
• Rinse the dirty water tank thoroughly with clean water before reattaching it to the unit.

Vaizdas: The Swiss Pro+ SP-FLC800W carpet cleaner positioned on a rug in a bedroom. This illustrates the product's compact design and how it fits into a home environment during use or storage.

Priežiūra

Reguliarus valymas užtikrina optimalų veikimą ir prailgina valytuvo tarnavimo laiką.

1. Po kiekvieno naudojimo

• Ištuštinkite ir išskalaukite bakus: Always empty and thoroughly rinse both the clean and dirty water tanks with fresh water. Allow them to air dry before storing.
• Clean Nozzle/Brush Area: Remove any hair, fibers, or debris from the brush roll and suction nozzle. A damp cloth can be used to wipe down these areas.

2. Periodinė priežiūra

• Patikrinkite, ar nėra užsikimšimų: Periodically check the suction path and hoses for any blockages that might reduce performance.
• Clean Filters (if applicable): If your model includes filters, refer to the diagram for their location and cleaning instructions.

3. Sandėliavimas

• Ensure all tanks are empty and dry.
• Tvarkingai apvyniokite maitinimo laidą.
• Store the carpet cleaner upright in a dry, protected area.

Trikčių šalinimas

Specifikacijos

Garantija ir palaikymas

Swiss Pro+ products are manufactured to the highest quality standards. For information regarding warranty coverage, product support, or replacement parts, please refer to the warranty card included with your purchase or visit the official Swiss Pro+ websvetainę.

For further assistance, please contact Swiss Pro+ customer service.