Įvadas
This manual provides comprehensive instructions for the installation, operation, and maintenance of your ATDEC ORA Monitor ARM, Model AW-ORA-F-S. This monitor arm is designed to free up desk space and improve ergonomic comfort by allowing precise adjustment of your monitor's position. It supports monitors up to 35 inches, both flat and curved, with a weight range of 4.4 to 17.6 lbs (2 to 8 kg).
Prieš montuodami atidžiai perskaitykite šias instrukcijas ir išsaugokite šį vadovą ateičiai.
Sąrankos instrukcijos
Follow these steps to correctly install your ATDEC ORA Monitor ARM.
1. Išpakavimas ir komponentų patikrinimas
Carefully remove all components from the packaging. Verify that all parts are present according to the packing list (not provided in this document, refer to your product packaging). If any parts are missing or damaged, do not proceed with installation and contact customer support.
2. Rašomasis stalas Clamp Montavimas
The ORA Monitor ARM typically uses a desk clamp for secure attachment to your workstation.
- Padėkite stalą klamp pagrindas ant stalo krašto.
- Priveržkite klipąamp screw until the arm is firmly secured to the desk. Ensure the clamp yra stabilus ir nesvyruoja.
Image: ATDEC ORA Monitor Arms with VESA plates and desk clamps. This image illustrates the different color options and the VESA mounting plate, which attaches to the back of your monitor, and the desk clamp that secures the arm to the desk.
3. Monitoriaus prijungimas
The ORA Monitor ARM uses a VESA mounting plate to attach to your monitor.
- Locate the VESA mounting holes on the back of your monitor. These are typically 75x75mm or 100x100mm apart.
- Attach the VESA plate from the monitor arm to the back of your monitor using the provided screws. Ensure the screws are tightened securely but do not overtighten.
- Carefully lift the monitor with the attached VESA plate and slide it onto the arm's mounting head. Ensure it clicks into place or is secured with any locking mechanism present on the arm.
Image: Monitors mounted on ATDEC ORA arms in an office. This image demonstrates the monitor arm in use, showing two monitors attached to the arms and positioned on a desk, highlighting the space-saving and ergonomic benefits.
4. Kabelių valdymas
Route your monitor cables (power, video, etc.) through the integrated cable management channels or clips on the monitor arm. This helps maintain a tidy workspace and prevents cable damage.
Naudojimo instrukcijos
The ATDEC ORA Monitor ARM offers various adjustment capabilities for optimal viewkomfortas.
- Aukščio reguliavimas: Gently push or pull the monitor up or down to achieve the desired height. The gas spring mechanism will hold it in place.
- Pakreipimo reguliavimas: Tilt the monitor screen up or down to reduce glare and find your preferred viewing kampas.
- Sukimosi reguliavimas: Rotate the monitor left or right to share your screen with others or adjust your viewpadėtis.
- Pasukimas (portretas / peizažas): Pasukite monitorių 90 laipsnių kampu, kad perjungtumėte horizontalią ir vertikalią orientacijas.
- Įtempimo reguliavimas: If the arm is too stiff or too loose for your monitor's weight, use the included Allen key to adjust the tension screw on the arm. Turn clockwise to increase tension (for heavier monitors) and counter-clockwise to decrease tension (for lighter monitors). Adjust gradually until the monitor stays in position when released.
Priežiūra
Reguliarus techninis aptarnavimas užtikrina monitoriaus laikiklio ilgaamžiškumą ir optimalų veikimą.
- Valymas: Nuvalykite rankų paviršius minkšta,amp skudurėliu. Venkite abrazyvinių valiklių ar tirpiklių.
- Periodiniai patikrinimai: Periodiškai patikrinkite visus varžtus ir jungtis, kad jie būtų tvirtai priveržti. Jei reikia, priveržkite.
- Įtampa: Re-adjust the tension if your monitor's weight changes or if the arm no longer holds its position correctly.
Trikčių šalinimas
| Problema | Galima priežastis | Sprendimas |
|---|---|---|
| Monitor arm sags or drifts down. | Įtempimas per mažas monitoriaus svoriui. | Increase the gas spring tension using the Allen key (turn clockwise). |
| Monitor arm is difficult to move up or down. | Tension is too high for the monitor's weight. | Decrease the gas spring tension using the Allen key (turn counter-clockwise). |
| Monitor wobbles or is unstable. | Rašomasis stalas clamp or VESA plate screws are loose. | Užtikrinkite, kad stalas klamp is securely tightened. Check and tighten all VESA mounting screws on the monitor. |
| Cables are tangled or messy. | Neteisingas kabelio išdėstymas. | Re-route cables through the integrated cable management channels or clips on the arm. |
Specifikacijos
- Modelio numeris: AW-ORA-FS
- Prekinis ženklas: ATDEC
- Suderinami įrenginiai: Monitorius
- Montavimo tipas: Stalviršis Clamp
- Judėjimo tipas: Pakreipimas, pasukimas, sukimas, aukščio reguliavimas (dujinė spyruoklė)
- Palaikomas monitoriaus dydis: Up to 35 inches (Flat & Curved)
- Supported Monitor Weight: 4.4–17.6 svaras (2–8 kg)
- Prekės svoris: 8.58 svaro (apie 3.89 kg)
- Pakuotės matmenys: 22.44 x 7.09 x 5.31 colio (apytiksliai 57 x 18 x 13.5 cm)
- UPC: 881493020214
- ASIN: B0C8ZPWLR5
- Gamintojas: Atdec Pty Ltd
- Pirmą kartą pasiekiama data: 22 m. birželio 2023 d
Garantija ir palaikymas
For warranty information, technical support, or to purchase replacement parts, please refer to the official ATDEC websvetainėje arba susisiekite su jų klientų aptarnavimo skyriumi. Išsaugokite pirkimo kvitą kaip pirkimo įrodymą.
ATDEC Official Websvetainė: www.atdec.com