Einaus 2-Channel Universal Wireless Radio Receiver Instruction Manual

1. Įvadas

This instruction manual provides detailed guidance for the installation, setup, and operation of your Einaus 2-Channel Universal Wireless Radio Receiver. This device is designed for wireless control of various electrical appliances, including heaters, ventilation systems, air conditioners, pumps, barriers, lighting, multi-channel electric doors and windows, electronic locks, garage doors, lifting equipment, and industrial automation systems. Please read this manual thoroughly before use to ensure proper function and safety.

2. Pakuotės turinys

Atidarius pakuotę, joje turėtų būti šie komponentai:

• 1 x Receiver module with protective casing
• 2 x Remote controls (each with battery installed)

Jei trūksta kokių nors komponentų arba jie pažeisti, susisiekite su klientų aptarnavimo tarnyba.

3. Specifikacijos

4. Produktas baigtasview

5. Sąranka ir susiejimas

5.1. Clearing Existing Codes

To clear all previously paired remote controls from the receiver's memory:

1. Raskite Mokymosi mygtukas on the receiver board.
2. Paspauskite ir palaikykite Mokymosi mygtukas until the indicator light turns off. This indicates that all stored codes have been successfully cleared.

5.2. Pairing a Remote Control (Learning Mode)

To pair a new remote control with the receiver:

1. Paspauskite Mokymosi mygtukas on the receiver once. The indicator light will flash once and then turn off. This signifies the receiver is ready to learn a new code in Momentary mode.
2. Immediately press any button on your remote control. The indicator light on the receiver will flash to confirm successful pairing.
3. Repeat for additional remote controls if needed.

6. Veikimo režimai

The receiver supports several operating modes, which determine how the relay responds to remote control input. You can set the desired mode by pressing the Režimo mygtukas on the receiver board a specific number of times.

6.1. Momentary Mode

In Momentary mode, the relay activates only as long as the remote control button is pressed. Releasing mygtukas išjungia relę.

• Nustatymas: Paspauskite Režimo mygtukas once. The indicator will flash once and turn off.

6.2. Latch Mode

In Latch mode, one button press activates the relay, and another distinct button press is required to deactivate it.

• Nustatymas: Paspauskite Režimo mygtukas twice. The indicator will flash twice and turn off.

6.3. Perjungti režimą

In Toggle mode, a single button press activates the relay, and pressing the same button again deactivates it. It acts like a flip-flop switch.

• Nustatymas: Paspauskite Režimo mygtukas three times. The indicator will flash three times and turn off.

6.4. 5-Second Delay Mode

This mode activates the relay for a fixed duration of 5 seconds after a button press, then automatically deactivates it.

• Nustatymas: Paspauskite Režimo mygtukas four times. The indicator will flash four times and turn off.

7. Elektros instaliacijos schemos

The following diagrams illustrate common wiring configurations for the Einaus 2-Channel Universal Wireless Radio Receiver. Always ensure power is disconnected before making any wiring changes.

8. Priežiūra

The Einaus Wireless Radio Receiver is designed for reliable operation with minimal maintenance. Follow these guidelines to ensure longevity:

• Valymas: Keep the receiver free from dust and debris. Use a soft, dry cloth for cleaning. Do not use liquid cleaners or solvents.
• Aplinka: Ensure the receiver is installed in a dry environment, away from direct moisture, extreme temperatures, and corrosive substances.
• Maitinimas: Use a stable power supply within the specified voltage diapazonas (DC 12-48V).
• Nuotolinio valdymo pulto baterijos: Replace remote control batteries when their range decreases or they stop responding.

9. Problemų sprendimas

If you encounter issues with your receiver, refer to the following troubleshooting steps:

• Imtuvas neatsako:
  • Check the power supply to the receiver. Ensure it is within the 12-48V DC range and properly connected.
  • Patikrinkite, ar nuotolinio valdymo pulto baterijos nėra išsekusios.
  • Ensure the remote control is paired correctly. Try re-pairing the remote control (refer to Section 5.2).
  • Check for strong radio interference in the vicinity.
• Trumpas veikimo diapazonas:
  • Pakeiskite nuotolinio valdymo pulto baterijas.
  • Ensure there are no significant obstructions (thick walls, metal structures) between the remote and the receiver.
  • Avoid installing the receiver near large metal objects or other radio-emitting devices.
• Relė neįsijungia / neišsijungia:
  • Check the wiring to the load. Ensure connections are secure and correct according to the wiring diagrams (Section 7).
  • Verify the operating mode is set as intended (Section 6).
  • Ensure the load current does not exceed the maximum 10A rating.

Jei problema išlieka atlikus šiuos veiksmus, susisiekite su klientų aptarnavimo tarnyba.

10. Garantija ir palaikymas

This Einaus product is covered by a standard manufacturer's warranty against defects in materials and workmanship. Please refer to your purchase documentation for specific warranty terms and duration.

Dėl techninės pagalbos, trikčių šalinimo ar garantinių pretenzijų kreipkitės tiesiogiai į pardavėją arba gamintoją. Išsaugokite pirkimo kvitą kaip pirkimo įrodymą.