ASAHOM 6ft Extension Cords with Signal Ampgyvybingesnis

1. Produktas baigtasview

This manual provides instructions for the ASAHOM 6ft Extension Cords with Signal Amplifier, designed to extend the reach of your compatible permanent outdoor lights. This product is essential for customizing the layout of your lighting system across different architectural features.

1.1 Pakuotės turinys

• 2 x 6ft Extension Cords
• 1 x Signal Ampgyvybingesnis

1.2 Suderinamumas

SVARBU: These extension cords and signal amplifier are exclusively compatible with ASAHOM S1040, S1050, and S106B Permanent Outdoor Lights. They are not designed for use with other brands or models of lighting systems.

1.3 Produkto komponentai

2. Diegimo vadovas

Follow these steps to properly install your ASAHOM extension cords and signal amplifier with your compatible permanent outdoor lights.

2.1 Pagrindinis ryšys

1. Ensure your ASAHOM permanent outdoor lights are powered off before making any connections.
2. Identify the male and female connectors on your existing light string and the extension cords.
3. Align the connectors and push them firmly together.
4. Twist the threaded cap on the connector to secure and waterproof the connection.

2.2 Using the Signal Ampgyvybingesnis

Signalas amplifier is crucial when connecting more than two 6ft extension cords continuously. It ensures signal integrity over longer distances.

• If you are using more than two 6ft extension cords in a continuous run, the signal amplifier must be connected before the first extension cord in the extended segment.
• Connect the signal amplifier between the main light controller and the first extension cord, or between two extension cords if extending a long segment.

2.3 Maximum Extension Limit

Each light controller supports a maximum of five 6ft extension cords. Exceeding this limit may cause the ASAHOM permanent outdoor lights to stop functioning correctly.

2.4 Visual Guide for Extension Cable Connection

3. Naudojimo gairės

These extension cables allow for flexible installation of your ASAHOM permanent outdoor lights on various eaves or roof lines, enabling creative and customized lighting designs.

4. Priežiūra ir priežiūra

• Regularly inspect all connections for tightness and ensure waterproof caps are securely fastened.
• Keep the cords free from physical damage or excessive tension.
• Clean the cords and amplifier gently with a soft, damp Jei reikia, naudokite šluostę. Venkite stiprių cheminių medžiagų.

5. Problemų sprendimas

5.1 Lights Not Working After Extension

• Patikrinkite suderinamumą: Ensure the extension cords are used only with compatible ASAHOM S1040, S1050, or S106B lights.
• Patikrinkite ryšius: Make sure all male and female connectors are fully inserted and their threaded caps are tightly secured to maintain a waterproof and stable electrical connection.
• Signalas AmpLiferio vieta: If using more than two extension cords, confirm the signal amplifier is correctly installed before the first extension cord in the extended segment.
• Exceeding Limit: Ensure you have not connected more than five 6ft extension cords to a single controller. Reduce the number of extensions if this limit is exceeded.
• Maitinimas: Confirm the main light system's power supply is functioning correctly.

6. Gaminio specifikacijos

7. Garantija ir palaikymas

For warranty information or technical support, please refer to the product packaging or contact ASAHOM customer service directly. Keep your purchase receipt for warranty claims.