Wampler CATACOMBS
Wamp„Catacombs“ reverbo ir delsos pedalo naudotojo vadovas
Model: CATACOMBS
Įvadas
Wampler Catacombs is a programmable, all-in-one delay and reverb pedal designed to provide a wide range of time-based effects for musicians. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your Catacombs pedal.
Produktas baigtasview
The Catacombs pedal integrates 11 popular delay and reverb sounds into a single, intuitive unit. It features studio-quality 48 kHz sampling rate with 24-bit audio conversion, 8 onboard preset locations, and MIDI compatibility for up to 128 total presets.
1 paveikslas: Priekyje view iš Wampler Catacombs pedal, showing controls for delay and reverb effects, input/output jacks, and footswitches.
2 paveikslas: Kampuotas view iš Wampler Catacombs pedal, highlighting its compact design and various control knobs.
Sąranka
Galios reikalavimai
Wampler Catacombs pedal requires a standard 9V DC power supply (not included) with a center-negative barrel connector. Ensure the power supply provides sufficient current for optimal performance.
Connecting Your Pedal
- Prijunkite savo instrumentą (pvz., gitarą) prie MONO IN or STEREO IN lizdą pedalo dešinėje pusėje, naudodami standartinį 6,35 mm instrumentinį kabelį.
- Prijunkite MONO IŠĖJIMAS or STEREO OUT domkratą kairėje pedalo pusėje prie savo amp„Lifier“ arba „Next“ efektų pedalas.
- Prijunkite 9 V nuolatinės srovės maitinimo šaltinį prie 9V DC įvesties lizdas.
- For MIDI control, connect a MIDI cable to the MIDI įvestis.
Naudojimo instrukcijos
Kontroliuojaview
- Delay Type Knob: Selects between various delay types including Tape, SPC, FTE, BBD, ANLG, and DIGI.
- Reverb Type Knob: Selects between reverb types such as SHMR (Shimmer), PLT (Plate), SPR (Spring), ROOM, and HALL.
- Time/Shimmer Knob: Adjusts the delay time or shimmer intensity depending on the selected effect.
- Feedback/Decay Knob: Controls the number of delay repeats or the reverb decay time.
- Mod Rate Knob: Adjusts the modulation rate for effects with modulation.
- Delay Tone Knob: Shapes the tone of the delay repeats.
- Reverb Tone Knob: Shapes the tone of the reverb effect.
- Bypass/ALT Footswitch: Toggles the effect on/off. Hold to access alternate functions (ALT mode).
- Preset/Save Footswitch: Cycles through presets. Hold to save current settings to a preset location.
- Kojinis jungiklis „Tap Tempo“: Taps in the desired delay tempo.
Išankstinių nustatymų išsaugojimas ir atšaukimas
The Catacombs pedal allows for 8 onboard preset locations. To save a preset, adjust the knobs to your desired sound, then press and hold the Preset/Save footswitch until the indicator lights confirm the save. To recall a preset, short press the Preset/Save footswitch to cycle through the saved locations.
Alternate Functions (ALT Mode)
Some knobs have alternate functions accessible by holding the Bypass/ALT footswitch. When in ALT mode, the indicator light will change (e.g., from blue to red as noted in some user feedback), allowing you to adjust secondary parameters. Release the footswitch to return to normal operation.
Priežiūra
To ensure the longevity and optimal performance of your Wampler Catacombs pedal, follow these maintenance guidelines:
- Keep the pedal clean by wiping it with a soft, dry cloth. Avoid abrasive cleaners or solvents.
- Pedalą laikykite vėsioje, sausoje vietoje, toliau nuo tiesioginių saulės spindulių ir ekstremalių temperatūrų.
- Atjunkite maitinimą, kai ilgesnį laiką nenaudojate.
- Reguliariai tikrinkite visas kabelių jungtis, ar jos tvirtai pritvirtintos.
Trikčių šalinimas
| Problema | Galima priežastis | Sprendimas |
|---|---|---|
| Nuspaudus pedalą, garso nėra. | Neteisingas maitinimo šaltinis, sugedę laidai, neteisingos įvesties / išvesties jungtys. | Verify power supply is 9V DC center-negative. Check all instrument cables. Ensure input is connected to IN and output to OUT. |
| Effect is too subtle or too extreme. | Knobs are set incorrectly, or in ALT mode unintentionally. | Adjust the relevant control knobs (Time, Feedback, Tone). Check if the pedal is in ALT mode and adjust accordingly. |
| Cannot save or recall presets. | Incorrect footswitch operation. | Ensure you are holding the Preset/Save footswitch long enough to save. For recalling, use short presses. |
| Noise or hum. | Įžeminimo kilpa, sugedęs maitinimo šaltinis, trukdžiai. | Use an isolated power supply. Try different cables. Ensure proper grounding of all equipment. |
Specifikacijos
- Modelis: CATACOMBS
- Matmenys: 7.25 x 5.7 x 3.75 colio
- Prekės svoris: 1.39 svaro
- Maitinimo šaltinis: Corded Electric (9V DC, center-negative, power supply not included)
- Signalo formatas: Analoginis
- Audio Output Effects: Delay, Reverb
- Samplingo kaina: 48 kHz
- Audio Bit Depth: 24 bitų
- Išankstiniai nustatymai: 8 onboard, 128 via MIDI
- Manufacture Location: Designed and Built in the USA
Garantija ir palaikymas
Wampler Pedals products are designed and built to high standards. For warranty information and technical support, please refer to the official Wampler pedalai websvetainėje arba susisiekite tiesiogiai su jų klientų aptarnavimo tarnyba. Išsaugokite pirkimo įrodymą garantiniams reikalavimams.
Norėdami gauti daugiau pagalbos, apsilankykite Wampler Store on Amazon.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.