ESKY 150 EC

ESKY 150 EC Micro RC Helicopter Instruction Manual

Model: 150 EC

Įvadas

This manual provides essential instructions for the safe and effective operation of your ESKY 150 EC Micro RC Helicopter. The 150 EC is a third-generation micro remote-controlled helicopter designed for ease of operation. It features a 6-axis gyroscope for stable flight, atmospheric pressure and altitude hold capabilities, hovering, and a controllable flight path. It also includes a one-button shutdown function for emergency situations.

Kas yra dėžutėje

Carefully unpack all components and ensure all items listed below are present. If any items are missing or damaged, please contact customer support.

  • 1 x ESKY 150 EC malūnsparnis
  • 1 x MINI 6X 6-Channel 2.4GHz Transmitter (Remote Control)
  • 1 x 1S 3.7V 150mAh 20C Li-Po Battery (for helicopter)
  • 2 x pagrindiniai peiliai (atsarginiai)
  • 1 x uodegos peilis (atsarginis)
  • 1x USB pakrovėjas
  • 2 x atsuktuvai
  • 1 x Naudotojo vadovas (šis dokumentas)
Contents of the ESKY 150 EC Micro RC Helicopter package, including the helicopter, remote control, spare blades, battery, USB charger, and tools.

Image: All components included in the ESKY 150 EC package.

Produktas baigtasview

Sraigtasparnių komponentai

Šoninė view of the ESKY 150 EC Micro RC Helicopter, yellow with blue and white accents.

Vaizdas: Šoninė view of the ESKY 150 EC helicopter.

The ESKY 150 EC helicopter features a durable frame, main rotor blades, a tail rotor, landing skids, and a removable canopy. The main rotor provides lift and control, while the tail rotor controls yaw (left/right rotation).

Nuotolinio valdymo pultas (siųstuvas)

The MINI 6X 6-Channel 2.4GHz transmitter is used to control the helicopter. Familiarize yourself with its various controls:

Labeled diagram of the MINI 6X 6-Channel 2.4GHz Remote Control, showing Mode Switch, Power LED, Throttle Cut Switch, Rudder, Throttle, Aileron, Elevator, Trim controls, and Power Switch.

Image: Labeled diagram of the MINI 6X Remote Control.

  • Režimo jungiklis: Changes flight modes (e.g., beginner/advanced).
  • Maitinimo LED indikatorius: Rodo maitinimo būseną.
  • Droselio pjovimo jungiklis: Immediately cuts power to the motor.
  • Rudder (Left/Right): Controls the helicopter's yaw.
  • Throttle (Up/Down): Controls the main rotor speed and altitude.
  • Aileron (Left/Right): Controls the helicopter's roll (side-to-side movement).
  • Elevator (Up/Down): Controls the helicopter's pitch (forward/backward movement).
  • Trim Controls (Throttle, Rudder, Aileron, Elevator): Fine-tune controls to correct unwanted drift.
  • Maitinimo jungiklis: Turns the remote control ON/OFF (hold down for ON/OFF).

Sąranka

1. Sraigtasparnio akumuliatoriaus įkrovimas

The helicopter uses a 1S 3.7V 150mAh Li-Po battery. Always use the provided USB charger.

  1. Prijunkite USB įkroviklį prie USB maitinimo šaltinio (pvz., kompiuterio USB prievado, USB sieninio adapterio).
  2. Connect the helicopter battery to the USB charger. Ensure the polarity is correct.
  3. The indicator light on the charger will show the charging status (refer to charger instructions for specific light patterns).
  4. Once charging is complete, disconnect the battery from the charger. Do not overcharge.
Two USB chargers with Li-Po batteries connected, illustrating the charging process.

Image: Connecting the Li-Po battery to the USB charger.

2. Sraigtasparnio akumuliatoriaus montavimas

Ensure the helicopter is powered off before installing the battery.

  1. Gently remove the helicopter's canopy to access the battery compartment.
  2. Insert the charged Li-Po battery into the compartment.
  3. Connect the battery plug to the helicopter's power port.
  4. Carefully reattach the canopy.
Helicopter with its canopy removed, showing the internal battery compartment.

Image: Helicopter with canopy removed, revealing the battery compartment.

Helicopter with the Li-Po battery correctly inserted into its compartment.

Image: Battery inserted into the helicopter.

3. Įjungimas ir priskyrimas

The helicopter and remote control must be bound (paired) before flight.

  1. Pastatykite sraigtasparnį ant lygaus, horizontalaus paviršiaus.
  2. Ensure the remote control's throttle stick is in the lowest position.
  3. Įjunkite sraigtasparnio maitinimo jungiklį. Mirksės sraigtasparnio indikatoriaus lemputė.
  4. Press and hold the Power Switch on the remote control until it turns on. The remote control's indicator light will flash.
  5. Wait for a few seconds. The indicator lights on both the helicopter and remote control should become solid, indicating a successful binding.
  6. If binding fails, turn off both devices and repeat the process.

Naudojimo instrukcijos

Always operate the helicopter in an open, safe area, away from people, animals, and obstacles. Ensure you have sufficient space for flight.

Pagrindiniai skrydžio valdikliai

  • Droselis (kairė vairasvirtė aukštyn/žemyn): Increases or decreases the main rotor speed, controlling ascent and descent.
  • Vairas (kairė svirtis kairėn/dešinėn): Controls the helicopter's rotation around its vertical axis (yaw).
  • Liftas (dešinė svirtis aukštyn/žemyn): Valdo judėjimą pirmyn ir atgal (žingsnį).
  • Eleronas (dešinė svirtis kairė/dešinė): Valdo judėjimą iš vienos pusės į kitą (ritinį).

Kilimas ir nusileidimas

  1. Kilimas: Slowly push the throttle stick up. The helicopter will gain altitude. Maintain a steady throttle to achieve a stable hover.
  2. Nusileidimas: Slowly pull the throttle stick down. The helicopter will descend. Reduce throttle completely upon landing.

Altitude Hold and Hover

The 150 EC is equipped with a 6-axis gyroscope and atmospheric pressure sensor for stable flight and altitude hold. Once the helicopter reaches a desired altitude, release the throttle stick to its center position. The helicopter will attempt to maintain its current height.

Flight Modes (Hi/Lo)

The remote control features a Mode Switch. It is recommended to use the "Hi" mode for more stable and responsive flight. The "Lo" mode may exhibit a slight delay in controller response.

One-Button Shutdown

In an emergency or if the helicopter is out of control, use the Throttle Cut Switch to immediately stop the motors. This function can also be used for a quick, controlled shutdown after landing.

Priežiūra

Valymas

Wipe the helicopter and remote control with a soft, dry cloth after each use. Avoid using water or chemical cleaners, as they can damage electronic components.

Ašmenų keitimas

If main or tail blades become damaged, replace them with the provided spares using the included screwdriver. Ensure blades are securely fastened but not overtightened.

Four circular close-up images showing details of the helicopter: battery compartment, main rotor attachment, tail rotor, and canopy removal.

Vaizdas: Išsamus views of helicopter components, including rotor attachment points.

Akumuliatoriaus priežiūra

  • Visada naudokite originalų įkroviklį.
  • Neperkraukite ir per daug neiškraukite akumuliatoriaus.
  • Baterijas laikykite vėsioje, sausoje vietoje, toliau nuo tiesioginių saulės spindulių ir karščio.
  • If the battery swells or shows signs of damage, discontinue use immediately and dispose of it properly.

Trikčių šalinimas

ProblemaGalima priežastisSprendimas
Sraigtasparnis nereaguoja į nuotolinio valdymo pultą.Not bound, low battery (helicopter or remote), power off.Ensure both devices are powered on. Re-bind the helicopter and remote control. Charge helicopter battery. Replace remote control batteries.
Sraigtasparnis dreifuoja kybodamas.Uneven trim settings, slight wind, unbalanced blades.Adjust trim controls on the remote control. Operate in a calm environment. Check blades for damage and replace if necessary.
Sraigtasparnis nepakyla.Low helicopter battery, damaged blades, throttle not advanced enough.Charge helicopter battery. Check and replace damaged blades. Slowly increase throttle.
Trumpas skrydžio laikas.Baterija nėra iki galo įkrauta, sensta.Ensure battery is fully charged. Consider replacing the battery if it's old or damaged.

Specifikacijos

  • Modelio numeris: 150 EB
  • Gamintojas: ESKY
  • Valdymo sistema: 6 ašių giroskopas
  • Savybės: Height Hold, Hover, One-button Shutdown
  • Sraigtasparnio akumuliatorius: 1S 3.7V 150mAh Li-Po (included)
  • Nuotolinio valdymo pultas: MINI 6X 6-Channel 2.4GHz Transmitter
  • Rekomenduojamas amžius: 14 metai ir daugiau
  • Prekės svoris: Maždaug 1.05 svaro (įskaitant pakuotę)
  • Pakuotės matmenys: 8.3 x 7.1 x 3.8 colio
Diagram showing the dimensions of the ESKY 150 EC helicopter: 186mm length, 44mm width, 59mm height.

Image: ESKY 150 EC Helicopter dimensions.

Saugos gairės

Please read and adhere to these safety guidelines to prevent injury or damage.

  • Always operate the helicopter in an open area, away from people, pets, and obstacles.
  • Neskraidykite šalia elektros linijų, kelių ar vandens telkinių.
  • Keep fingers and loose clothing away from rotating blades.
  • Never fly in strong winds or adverse weather conditions.
  • Adult supervision is recommended for users under the age of 14.
  • Do not attempt to modify the helicopter or its components.
  • Išjunkite sraigtasparnį ir nuotolinio valdymo pultą, kai jų nenaudojate.

Garantija ir palaikymas

Information regarding product warranty and customer support contact details is not available in the provided product data. Please refer to the product packaging or the seller's websvetainėje, kurioje pateikiamos konkrečios garantijos sąlygos ir pagalbos parinktys.

Oficialūs produktų vaizdo įrašai

No official product videos from the seller were provided in the product data.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.