Įvadas
The BUVAYE BN03 is a multi-functional device designed for automotive emergencies. It combines a powerful car jump starter, a tire inflator, a portable power bank, and an LED flashlight. This manual provides detailed instructions for safe and effective use of the device.
Produkto savybės
- Didelio našumo šuolio starteris: Delivers 2500A peak current, capable of starting vehicles with up to 5L diesel or 8L gas engines.
- „Smart Clamp Apsauga: Features 10 integrated safety protections including anti-spark, reverse polarity, overcurrent, short-circuit, overcharge, over-discharge, high-temperature, low-temperature, reverse connection, and overload protection.
- Fast Tire Inflator: Equipped with a 22-cylinder turbo motor, providing an airflow of 35 liters per minute. Supports real-time tire pressure detection, automatic shut-off at preset values, and unit switching. Can inflate 195/65/R15 tires from 0 to 35 PSI in approximately 5 minutes.
- Atminties funkcija: Retains the last set inflation mode and air pressure value for convenience.
- Nešiojamas maitinimo bankas: Functions as a mobile power source for charging electronic devices.
- LED žibintuvėlis: Integrated LED light for emergency illumination.
Pakuotės turinys
Patikrinkite pakuotę, ar joje yra šie daiktai:
- BUVAYE BN03 Jump Starter with Air Compressor x1
- Išmanusis šuolio paleidiklis Clamps x1
- Pripučiama žarna x1
- Purkštukų adapteriai x4
- USB-C įkrovimo laidas x1
- Accessory Storage Bag x1
- Vartotojo vadovas x1
Saugos instrukcijos
Prieš naudodami šį gaminį, perskaitykite visus saugos įspėjimus ir instrukcijas. Nesilaikant įspėjimų ir instrukcijų, gali kilti elektros smūgis, gaisras ir (arba) sunkūs sužalojimai.
- Neužveskite užšalusio akumuliatoriaus.
- Įsitikinkite, kad prijungimas yra teisingas – poliškumas teisingas (raudonas kontaktasamp į teigiamą, juodą klamp į neigiamą).
- Nejunkite teigiamo ir neigiamo jungčiųamps kartu.
- Prietaisą laikykite vaikams nepasiekiamoje vietoje.
- Saugokite prietaisą nuo lietaus ar drėgnų sąlygų.
- Neardykite įrenginio. Visus techninės priežiūros darbus patikėkite kvalifikuotiems darbuotojams.
- Naudokite tik pateiktą įkrovimo laidą ir priedus.
- Avoid prolonged inflation to prevent overheating. Allow 10 minutes of cooling time after each inflation cycle.
Komponentas baigtasview
Vaizdas: Diagram showing the components and features of the BUVAYE BN03 device.
This image illustrates the various parts of the BUVAYE BN03, including the power switch, air pressure controls, pressure unit adjustment, smart clip socket, inflator hose socket, USB-A output, USB-C input port, LED flashlight switch, positive clamp (red), negative clamp (black), and jump start port.
- Maitinimo jungiklis: Įjungia/išjungia įrenginį.
- Air Pressure +/-: Adjusts the target air pressure for inflation.
- Pressure Unit Adjustment: Cycles through pressure units (PSI, KPA, BAR, KG/CM²).
- Smart Clip Socket: Port for connecting the smart jump starter clamps.
- Inflator Hose Socket: Port for connecting the air inflator hose.
- USB-A išėjimas: Skirta išoriniams įrenginiams įkrauti.
- USB-C įvesties prievadas: For charging the BUVAYE BN03 device.
- LED Flashlight Switch: Activates the LED light.
- Teigiamas Clamp (raudona): Connects to the positive terminal of the car battery.
- Neigiamas Clamp (juoda): Connects to the negative terminal of the car battery.
- Greito paleidimo prievadas: Prijungia išmanųjį kl.amps to the main unit.
Sąranka ir įkrovimas
Įrenginio įkrovimas
Before first use, fully charge the BUVAYE BN03. Connect the provided USB-C charging cable to the USB-C input port on the device and to a suitable USB power adapter (not included). The display will indicate the charging status. A full charge is recommended for optimal performance.
Pirminė apžiūra
Inspect the device and all accessories for any damage before use. Do not use if any components are damaged.
Naudojimo instrukcijos
1. Peršokti užvedant transporto priemonę
Vaizdas: A person connecting the jump starter clamps prie automobilio akumuliatoriaus.
This image demonstrates the process of connecting the BUVAYE BN03 jump starter to a vehicle's battery terminals, showing the red clamp teigiamo poliaus ir juodo kontaktoamp on the negative terminal.
- Ensure the BUVAYE BN03 is sufficiently charged.
- Išjunkite automobilio degimą ir visus priedus.
- Prijunkite išmanųjį užvedimo laidą clamps to the jump start port on the BUVAYE BN03.
- Prijunkite red (positive) clamp prie teigiamas (+) terminalas of the vehicle's battery.
- Prijunkite black (negative) clamp prie neigiamas (-) gnybtas of the vehicle's battery.
- Įsitikinkite, kad klamps are securely attached and the indicator light on the smart clamp is green. If it's red or flashing, check connections and battery status.
- Užveskite transporto priemonės variklį.
- Kai variklis užsives, nedelsdami nuimkite išmanųjį laikiklį.amps from the vehicle battery, first the negative (black) clamp, then the positive (red) clamp.
- Atjunkite išmanųjį telefonąamps from the BUVAYE BN03.
Pastaba: If the vehicle does not start after 3 attempts, allow the jump starter to cool down for a few minutes before trying again. Consult your vehicle's manual for specific jump-starting procedures.
2. Inflating Tires
Vaizdas: The BUVAYE BN03 connected to a car tire for inflation.
This image shows the BUVAYE BN03 device with its inflator hose connected to a car tire valve, demonstrating the tire inflation function.
- Connect the inflator hose to the inflator hose socket on the BUVAYE BN03.
- Attach the other end of the inflator hose to the tire valve. Ensure a secure connection to prevent air leakage.
- Turn on the BUVAYE BN03. The display will show the current tire pressure.
- Use the "Air Pressure +/-" buttons to set the desired target pressure. Press the "Pressure Unit Adjustment" button to cycle through units (PSI, KPA, BAR, KG/CM²).
- Press the start button (often the power button or a dedicated inflation button) to begin inflation.
- Prietaisas automatiškai sustos, kai pasieks iš anksto nustatytą slėgį.
- Disconnect the inflator hose from the tire valve and then from the BUVAYE BN03.
Atminties funkcija: After powering on, press "+" or "-" to recall the last set inflation mode and pressure value.
Pastaba: For continuous inflation, allow the device to cool down for 10 minutes after each inflation cycle to prevent overheating.
3. Naudojimas kaip išorinės baterijos
Vaizdas: The BUVAYE BN03 connected to a smartphone for charging.
This image shows the BUVAYE BN03 being used as a portable power bank, with a USB cable connecting it to a smartphone that is actively charging.
Connect your electronic device's USB charging cable to the USB-A output port on the BUVAYE BN03. The device will automatically begin charging your connected device.
4. LED žibintuvėlio naudojimas
Press the LED Flashlight Switch to cycle through different light modes: steady on, strobe, and SOS. Press again to turn off the light.
Priežiūra
- Valymas: Nuvalykite įrenginį minkštu, sausu skudurėliu. Nenaudokite stiprių cheminių medžiagų ar abrazyvinių valiklių.
- Saugykla: Prietaisą laikykite vėsioje, sausoje vietoje, toliau nuo tiesioginių saulės spindulių ir ekstremalių temperatūrų.
- Įkrovimas: Recharge the device every 3-6 months, even if not in use, to maintain battery health.
- Baterijos išmetimas: Dispose of the lithium-ion battery according to local regulations. Do not dispose of in household waste.
Trikčių šalinimas
| Problema | Galima priežastis | Sprendimas |
|---|---|---|
| Įrenginys neįsijungia. | Baterija išsikrovusi. | Visiškai įkraukite įrenginį naudodami USB-C laidą. |
| Transporto priemonė neužsiveda nuo kito variklio. | Neteisingas klamp connection; vehicle battery too low; jump starter battery too low. | Užtikrinkite clamps are connected correctly (red to +, black to -). Fully charge the jump starter. If the vehicle battery is severely discharged, it may require professional assistance. |
| Padangų pripūtimo įtaisas neveikia arba dirba lėtai. | Hose not securely connected; target pressure not set; device overheating. | Check hose connections. Set the desired pressure. Allow the device to cool down if it has been used continuously. |
| Išmanusis klamp indicator light is red or flashing. | Incorrect connection; short circuit; reverse polarity; battery fault. | Atjunkite ir vėl prijunkite clamps, ensuring correct polarity. Check for any short circuits. If the issue persists, the vehicle battery may be faulty. |
Specifikacijos
| Prekės ženklas | BUVAYE |
| Modelio numeris | BN03 |
| Peak Amppakilimas | 2500 A |
| ttage | 12 voltų |
| Baterijos sudėtis | Ličio jonų |
| Transporto priemonės paslaugos tipas | Automobilis |
| Padangų pripūtimo slėgis | Iki 150 PSI |
| Variklio suderinamumas (benzinas) | Iki 8.0l |
| Variklio suderinamumas (dyzelinas) | Iki 5.0l |
| Darbinės temperatūros diapazonas | -20°C iki +60°C (nuo -4°F iki +140°F) |
Vaizdas: Visual representation of the jump starter's capacity for gas and diesel engines.
This image highlights the BUVAYE BN03's capability to jump start vehicles with up to 8.5L gas engines and 6L diesel engines, with a peak current of 2500A.
Vaizdas: Icons illustrating the 10 safety protection features.
This image displays the comprehensive 10 protection features of the BUVAYE BN03, including reverse polarity, over current, over voltage, over charge, over-discharge, high-temp, low-temp, reverse connection, overload, and short circuit protection.
Garantija ir palaikymas
For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official BUVAYE websvetainėje. Išsaugokite pirkimo kvitą kaip pirkimo įrodymą.