Supra Oscar FR9016070B

Supra Oscar Wood Stove User Manual

Model: Oscar FR9016070B

1. Įvadas

This manual provides essential information for the safe and efficient operation, installation, and maintenance of your Supra Oscar wood stove. Please read this manual thoroughly before installing or operating the appliance. Retain this manual for future reference.

2. Saugos informacija

ĮSPĖJIMAS: Netinkamas montavimas, reguliavimas, keitimas, aptarnavimas ar techninė priežiūra gali sukelti žalą turtui, susižalojimą arba mirtį. Prieš montuodami arba atlikdami techninę priežiūrą, atidžiai perskaitykite montavimo, naudojimo ir priežiūros instrukcijas.

  • Visada užtikrinkite tinkamą vėdinimą, kad išvengtumėte apsinuodijimo anglies monoksidu.
  • Maintain required clearances to combustible materials as specified by local building codes and the stove's installation instructions.
  • Only burn approved dry, seasoned wood. Do not burn trash, plastics, treated wood, or flammable liquids.
  • Laikykite vaikus ir naminius gyvūnus atokiau nuo karštų viryklės paviršių.
  • Install smoke detectors and carbon monoxide detectors in your home.
  • Never leave the stove unattended during operation.

3. Sąranka ir diegimas

Installation of your Supra Oscar wood stove must be performed by a qualified professional in accordance with all local and national building and fire codes. Failure to comply with these regulations can result in fire, property damage, or personal injury.

3.1 Svetainės pasirinkimas

Choose a location that allows for proper chimney connection and maintains required clearances from combustible walls, furniture, and other materials. The floor beneath the stove must be constructed of non-combustible material or protected by an approved floor protector.

3.2 Chimney and Flue Pipe

Ensure the chimney system is correctly sized, in good condition, and regularly inspected. Use only approved flue pipes and connectors. All connections must be sealed properly to prevent smoke leakage.

Priekyje view of the Supra Oscar wood stove

1 pav.: priekis view of the Supra Oscar wood stove, showcasing the firebox door and air vents. This image illustrates the primary access point for loading fuel and managing the fire.

4. Naudojimo instrukcijos

4.1 First Use (Curing the Paint)

During the first few fires, the stove's paint will cure, emitting an odor and possibly some smoke. Ensure good ventilation during this period. Start with small fires and gradually increase the heat over several days to allow the paint to cure properly and prevent damage to the finish.

4.2 Loading Fuel

  1. Open the primary air control fully.
  2. Place crumpled newspaper or firelighters at the bottom of the firebox.
  3. Stack small pieces of kindling on top of the newspaper/firelighters.
  4. Light the newspaper/firelighters.
  5. Once the kindling is burning well, gradually add larger pieces of seasoned wood.
  6. Close the door securely once the fire is established.

4.3 Oro valdymas

The Supra Oscar wood stove features primary and secondary air controls to regulate combustion. The primary air control (usually located at the bottom of the door) is used for starting fires and for rapid heat output. The secondary air control (often located above the door or on the sides) introduces preheated air for more complete combustion, reducing emissions and increasing efficiency. Adjust these controls to achieve the desired burn rate and heat output.

4.4 Degalų papildymas

When refueling, open the primary air control fully for a few minutes before opening the stove door to prevent smoke spillage. Open the door slowly, add new fuel, and then close the door securely. Adjust air controls as needed.

5. Priežiūra

Regular maintenance ensures the safe and efficient operation of your wood stove.

5.1 Pelenų šalinimas

Remove ash regularly, typically when the ash bed is 2-3 cm deep. Use a metal shovel and place ashes in a metal container with a tight-fitting lid, away from combustible materials. Ensure ashes are completely cold before disposal.

5.2 Stiklo valymas

If the glass becomes dirty, allow the stove to cool completely. Use a damp cloth dipped in fine wood ash or a specialized glass cleaner for wood stoves. Avoid abrasive cleaners that can scratch the glass.

5.3 Chimney Cleaning

The chimney and flue pipe should be inspected and cleaned at least once a year, or more frequently if burning resinous wood or experiencing heavy creosote buildup. This should be performed by a certified chimney sweep.

5.4 Kasmetinė patikra

Have your stove and chimney system inspected annually by a qualified professional. They can check for wear and tear, proper seals, and overall safety.

6. Problemų sprendimas

  • Smoke Spillage: Ensure the chimney is clear, the flue damper is open, and the door is not opened too quickly. Check for downdrafts.
  • Poor Draft: May indicate a blocked chimney, cold chimney, or insufficient air supply to the room.
  • Maža šilumos išeiga: Ensure you are burning dry, seasoned wood. Check air control settings and chimney draft.
  • Excessive Creosote Buildup: Often caused by burning wet wood or operating the stove at too low a temperature. Increase burn temperature and ensure wood is dry.

7. Specifikacijos

Modelio numerisFR9016070B
Šilumos išėjimas4.8 kW
MedžiagaSteel / Cast Iron
Prekės svoris101.2 kg
ASINB0CGC3LP16

8. Garantija ir palaikymas

For warranty information and technical support, please refer to the documentation provided at the time of purchase or contact your authorized Supra dealer. Keep your proof of purchase for warranty claims.

Supra Oscar wood stove installed in a living space

Figure 2: The Supra Oscar wood stove installed in a living space, demonstrating its compact design and integration into a modern interior. This image provides a visual context for the stove's appearance in a home environment.

© 2024 Supra. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.