1. Įvadas
The FSP Hydro G PRO 1000W Power Supply is an 80 Plus Gold certified, fully modular unit designed for high-performance computing systems. It complies with ATX 3.1 and PCIe 5.1 standards, featuring a native 12V-2x6 connector for next-generation hardware. Its compact design and advanced features ensure stable power delivery, high efficiency, and quiet operation.
Iš viršaus į apačią view of the FSP Hydro G PRO 1000W Power Supply, highlighting its fan grille and compact design.
An illustration emphasizing the power supply's adherence to ATX 3.1 and PCIe 12V-2x6 standards, crucial for next-generation hardware.
2. Saugos informacija
Please read and understand all safety instructions before installing or operating this power supply. Failure to do so may result in personal injury or damage to your equipment.
- Negalima open the power supply unit. High voltagviduje yra dulkių, net kai įrenginys yra atjungtas nuo elektros tinklo.
- Negalima nekiškite jokių daiktų į ventiliatoriaus groteles ar ventiliacijos angas.
- Negalima expose the power supply to water, moisture, or extreme temperatures.
- Ensure the power supply is installed in a well-ventilated area.
- Naudokite tik su šiuo maitinimo šaltiniu pateiktus modulinius kabelius. Nesuderinamų kabelių naudojimas gali sukelti gedimų.
- Connect the power supply to a grounded electrical outlet.
- Before installation or maintenance, always disconnect the AC power cord from the wall outlet and the power supply.
3. Pakuotės turinys
Patikrinkite, ar pakuotėje yra visi reikalingi daiktai:
- FSP Hydro G PRO 1000W Power Supply Unit
- Modular Cable Set (Motherboard, CPU, PCIe, SATA, Peripheral)
- Kintamosios srovės maitinimo laidas
- Tvirtinimo varžtai
- Vartotojo vadovas
A comprehensive diagram displaying all modular cables provided with the power supply, detailing their lengths and connector configurations for Motherboard, CPU, PCIe, SATA, and Molex connections.
4. Sąranka ir diegimas
Follow these steps to install your FSP Hydro G PRO 1000W Power Supply:
- Paruoškite savo sistemą: Ensure your computer is powered off and unplugged from the wall outlet. Open your computer case to access the power supply mounting area.
- Išimkite seną maitinimo šaltinį (jei taikoma): Atjunkite visus laidus nuo seno maitinimo šaltinio ir išimkite jį iš korpuso.
- Prijunkite naują maitinimo šaltinį: Carefully place the FSP Hydro G PRO 1000W Power Supply into the designated bay in your computer case. Secure it with the provided mounting screws. Ensure the fan is oriented correctly for optimal airflow (typically facing downwards if your case has a bottom vent, or upwards if not).
- Prijunkite modulinius kabelius: Identify the necessary cables for your components. This power supply is fully modular, allowing you to connect only the cables you need. Refer to the connection panel diagram below.
- Pagrindinė plokštė: Connect the 24-pin ATX cable to the 'MOTHERBOARD' port on the PSU and to your motherboard.
- CPU: Connect the 4+4-pin or 8-pin CPU power cable(s) to the 'CPU' port(s) on the PSU and to your motherboard.
- PCIe (Graphics Cards): Connect the 6+2-pin PCIe cables or the native 12V-2x6 cable to the 'PCIe' port(s) on the PSU and to your graphics card(s). The 12V-2x6 connector is designed for high-power graphics cards.
- Peripherals (SATA/Molex): Connect SATA power cables for SSDs/HDDs and Molex cables for other peripherals to the 'PERIPHERAL' ports on the PSU.
- Kabelių valdymas: Tvarkingai išvedžiokite laidus, kad pagerintumėte oro cirkuliaciją ir pagerintumėte estetiką korpuse.
- Galutinis prijungimas: Kai bus atliktos visos vidinės jungtys, uždarykite kompiuterio korpusą. Prijunkite kintamosios srovės maitinimo laidą prie maitinimo šaltinio įvado, o tada – prie įžeminto sieninio lizdo.
Išsamus view of the power supply's modular connection panel, indicating dedicated ports for motherboard, CPU, PCIe, and peripheral cables, including the 12V-2x6 connector.
5. Naudojimo instrukcijos
After installation, follow these steps to operate your power supply:
- Maitinimas: Ensure the main power switch on the rear of the power supply is in the 'ON' (I) position. Then, power on your computer using its case power button.
- Ekologinis režimas: The FSP Hydro G PRO features an Eco switch. When the Eco switch is engaged (ON), the power supply fan will remain off under loads below 30% of the PSU's rated power, providing silent operation. The fan will automatically activate when the load exceeds 30% or when temperatures rise. If the Eco switch is disengaged (OFF), the fan will operate continuously.
The rear panel of the power supply, featuring the AC power inlet, the main power ON/OFF switch, and the Eco mode toggle switch for silent operation at low loads.
6. Priežiūra
Tinkama priežiūra užtikrina jūsų maitinimo šaltinio ilgaamžiškumą ir optimalų veikimą.
- Valymas: Periodically clean the exterior of the power supply and its fan grille to prevent dust buildup. Use a soft, dry cloth or compressed air. Ensure the power supply is unplugged before cleaning.
- Konforminė danga: This power supply is equipped with an exclusive conformal coating, providing protection against dust, humidity, and other environmental factors. This feature enhances reliability and durability, especially in challenging conditions.
A visual representation of the conformal coating protecting the internal circuitry of the power supply, ensuring reliable operation in challenging environmental conditions.
7. Problemų sprendimas
Jei kyla problemų dėl maitinimo šaltinio, žr. šias dažniausiai pasitaikančias problemas ir sprendimus:
| Problema | Galima priežastis | Sprendimas |
|---|---|---|
| Sistema neįsijungia. |
|
|
| Sistema įsijungia, bet iš karto išsijungia. |
|
|
| Fan is not spinning (Eco Mode). |
|
|
If the problem persists after attempting these solutions, please contact FSP customer support.
8. Specifikacijos
| Funkcija | Detalė |
|---|---|
| Modelio pavadinimas | HG2 |
| Prekės ženklas | FSP |
| Suderinami įrenginiai | KOMPIUTERIS |
| Jungties tipas | ATX |
| Išėjimo vattage | 1000 vatų |
| Formos faktorius | ATX |
| Aušinimo būdas | Air (with Eco Mode) |
| Prekės matmenys (I x P x A) | 6 x 6 x 3.5 colio (150 mm x 150 mm x 86 mm) |
| Prekės svoris | 3.87 kilogramo |
| Maitinimo bloko dizainas | Pilnas modulinis |
| Dabartinis reitingas | 10 Amps |
| Ventiliatorių skaičius | 1 |
| Maksimalus įvesties tūristage | 132 voltai (kintamoji srovė) |
| Minimalus įvesties tūristage | 90 voltai (kintamoji srovė) |
| Viršutinės temperatūros įvertinimas | 50 laipsniai Celsijaus |
| System Bus Connector Type | 12 Pin or 16 Pin (12V-2x6) |
| Gamintojas | FSP Group INC |
| UPC | 845685014177 |
| Gamintojo dalies numeris | PPA10A2423 |
| Modelio numeris | HG2-1000-G5T |
9. Garantija ir palaikymas
This FSP Hydro G PRO 1000W Power Supply comes with a 10 metų gamintojo garantija. For warranty claims, technical support, or any inquiries regarding your product, please contact FSP customer service through their official websvetainėje arba kontaktinę informaciją, pateiktą jūsų produkto pakuotėje.
For additional resources and product information, visit the official FSP websvetainė: www.fsplifestyle.com
