„SHARP AQUOS Sound Partner“ „Bluetooth“ kaklo garsiakalbis AN-SX8 Naudotojo vadovas

1. Įvadas

This manual provides essential instructions for the safe and effective use of your SHARP AQUOS Sound Partner Bluetooth Neck Speaker AN-SX8. Please read this manual thoroughly before using the product and retain it for future reference. This device is designed to deliver a personal audio experience while allowing you to remain aware of your surroundings.

2. Produktas baigtasview

The SHARP AQUOS Sound Partner AN-SX8 is a wireless neck speaker designed for comfortable, immersive audio. It features Bluetooth connectivity for wireless audio streaming and an AUX input for wired connections. Its lightweight design allows for extended wear.

1 paveikslas: SHARP AQUOS Sound Partner AN-SX8 Neck Speaker. This image displays the black, U-shaped neck speaker with control buttons visible on the top surface of the speaker units.

3. Sąranka

3.1 Įrenginio įkrovimas

Before initial use, fully charge the AN-SX8. Connect the provided USB charging cable to the charging port on the device and to a USB power adapter (not included) or a computer's USB port. The charging indicator light will illuminate during charging and turn off or change color when charging is complete.

3.2 Įjungimas / išjungimas

• To power on: Press and hold the Power button for approximately 3 seconds until the indicator light flashes.
• To power off: Press and hold the Power button for approximately 3 seconds until the indicator light turns off.

3.3 Pradinis „Bluetooth“ susiejimas

1. Ensure the AN-SX8 is powered off.
2. Paspauskite ir palaikykite maitinimo mygtuką maždaug 5–7 sekundes, kol indikatoriaus lemputė greitai mirksės, rodydama susiejimo režimą.
3. On your Bluetooth-enabled device (smartphone, tablet, TV), go to the Bluetooth settings and search for available devices.
4. Select "AN-SX8" from the list of found devices.
5. Once connected, the indicator light on the AN-SX8 will stop flashing rapidly and may glow steadily or flash slowly.

4. Naudojimo instrukcijos

4.1 Bluetooth ryšys

After initial pairing, the AN-SX8 will automatically attempt to connect to the last paired device when powered on. If it does not connect automatically, manually select "AN-SX8" from your device's Bluetooth settings.

4.2 AUX jungtis

To use a wired connection, connect one end of a 3.5mm audio cable (not included) to the AUX input port on the AN-SX8 and the other end to the audio output jack of your device. The device will automatically switch to AUX mode when a cable is detected.

4.3 Garsumo valdymas

• Paspauskite Garsumo padidinimas (+) mygtuką, norėdami padidinti garsumą.
• Paspauskite Patildyti (-) mygtuką, norėdami sumažinti garsumą.

4.4 Playback Control (Bluetooth Mode)

• Paspauskite Leisti / pristabdyti button once to play or pause audio.
• Du kartus paspauskite Leisti / pristabdyti mygtuką, norėdami pereiti prie kito takelio.
• Triskart paspauskite Leisti / pristabdyti mygtuką, norėdami pereiti prie ankstesnio takelio.

4.5 Call Handling (Bluetooth Mode)

• Paspauskite Leisti / pristabdyti vieną kartą paspauskite mygtuką, kad atsilieptumėte į skambutį.
• Paspauskite Leisti / pristabdyti mygtuką vieną kartą skambučio metu, kad jį užbaigtumėte.
• Paspauskite ir palaikykite Leisti / pristabdyti mygtuką 2 sekundes, kad atmestumėte įeinantį skambutį.

5. Priežiūra

5.1 Valymas

Wipe the device with a soft, dry cloth. Do not use abrasive cleaners, alcohol, or chemical solvents, as these may damage the surface. Avoid getting moisture into any openings.

5.2 Saugykla

When not in use for extended periods, store the device in a cool, dry place away from direct sunlight and extreme temperatures. Fully charge the battery before storing and recharge it every few months to maintain battery health.

5.3 Akumuliatoriaus priežiūra

The AN-SX8 contains a built-in rechargeable battery. Do not attempt to replace the battery yourself. Avoid exposing the device to extreme heat or cold, as this can shorten battery life. Dispose of the battery according to local regulations.

6. Problemų sprendimas

• Nėra galios: Įsitikinkite, kad įrenginys visiškai įkrautas. Prijunkite jį prie maitinimo šaltinio ir patikrinkite įkrovimo indikatorių.
• Nėra garso:
  • Check the volume level on both the AN-SX8 and your connected device.
  • Ensure the device is correctly paired via Bluetooth or the AUX cable is securely connected.
  • Jei naudojate „Bluetooth“, pabandykite atjungti ir iš naujo susieti įrenginį.
• „Bluetooth“ ryšio problemos:
  • Ensure the AN-SX8 is in pairing mode or discoverable.
  • Move the AN-SX8 closer to your Bluetooth device.
  • Išjunkite ir įjunkite „Bluetooth“ savo šaltinio įrenginyje.
  • Clear the AN-SX8 from your device's Bluetooth list and re-pair.
• Iškraipytas garsas:
  • Reduce the volume on both the AN-SX8 and your connected device.
  • Ensure there are no obstructions or interference between the AN-SX8 and your Bluetooth device.
  • Patikrinkite garso šaltinį, ar nėra kokybės problemų.

7. Specifikacijos

8. Saugos informacija

• Saugokite įrenginį nuo vandens, drėgmės ar ekstremalių temperatūrų.
• Venkite ilgai klausytis dideliu garsumu, kad nepažeistumėte klausos.
• Nebandykite išardyti, taisyti ar modifikuoti įrenginio.
• Laikyti vaikams ir naminiams gyvūnėliams nepasiekiamoje vietoje.
• Dispose of the device and its battery responsibly according to local environmental regulations.

9. Garantija ir palaikymas

For warranty information and technical support, please refer to the official SHARP website or contact SHARP customer service. Keep your proof of purchase for warranty claims. Specific warranty terms may vary by region.

Dėl papildomos pagalbos apsilankykite SHARP Support Websvetainę (pvzamp(nuoroda, tikroji nuoroda gali skirtis).