Migro Double Pole Digital Timer Switch

1. Įvadas

This manual provides detailed instructions for the installation, operation, and maintenance of your Migro Double Pole Digital Timer Switch, Model Migro2120. This programmable timer is designed for 7-day, 24-hour operation, featuring a 3-year battery backup and a weatherproof enclosure, suitable for various applications requiring precise electrical control.

2. Saugos informacija

WARNING: Risk of Electric Shock. Installation and servicing should only be performed by qualified personnel.

• Always disconnect power at the circuit breaker or fuse box before installing or servicing the timer switch.
• Įsitikinkite, kad visi laidų sujungimai yra tvirti ir atitinka vietinius bei nacionalinius elektros kodeksus.
• Do not exceed the specified electrical ratings (Voltage, Ampera).
• Šis įrenginys skirtas stacionariam montavimui.
• The weatherproof enclosure provides protection against environmental elements; however, ensure it is properly sealed after installation.

3. Pakuotės turinys

• Migro Double Pole Digital Timer Switch (Model Migro2120)
• Atsparus oro sąlygoms korpusas
• Tvirtinimo detalės (varžtai, inkarai)
• Vartotojo vadovas (šis dokumentas)

4. Produktas baigtasview

Familiarize yourself with the timer's display and control buttons before operation.

1 vaizdas: Priekyje view of the Migro Digital Timer Switch control panel. It features an LCD display showing time, day, and status (AUTO/ON/OFF). Below the display are several blue buttons: 'P' (Program), 'D+' (Day), 'H+' (Hour), 'M+' (Minute), 'RESET', and 'MANUAL C/R' (Manual Control/Reset). A red 'ON' indicator light is visible above the display.

4.1. Ekranas

• Laiko rodymas: Shows current time (HH:MM:SS).
• Savaitės diena: Indicates the current day (e.g., MO, TU, WE, TH, FR, SA, SU).
• Veikimo režimas: Displays "AUTO" for automatic operation, "ON" for always on, or "OFF" for always off.
• Programos numeris: Shows the current program being viewed arba set.

4.2. Mygtukai

• P (Programa): Enters or exits programming mode. Used to cycle through program settings.
• D+ (Day): In time setting mode, adjusts the day. In program mode, selects days for the program.
• H+ (Hour): In time setting mode, adjusts the hour. In program mode, sets the hour for ON/OFF times.
• M+ (Minute): In time setting mode, adjusts the minute. In program mode, sets the minute for ON/OFF times.
• NUSTATYTI: Atkuria visus gamyklinius nustatymus. Paspauskite smailiu daiktu (pvz., rašiklio galiuku).
• MANUAL C/R (Manual Control/Recall): Toggles between AUTO, ON, and OFF modes. Also used to recall programs.

5. Sąranka ir diegimas

The Migro2120 timer switch is designed for 220VAC/240V 2-pole applications. Professional installation is highly recommended.

5.1. Montavimas

1. Choose a suitable location for the weatherproof enclosure, ensuring it is accessible for programming and maintenance.
2. Securely mount the enclosure using the provided mounting hardware.

5.2. Laidai

IMPORTANT: Ensure power is OFF at the main circuit breaker before proceeding with wiring.

1. Open the weatherproof enclosure and locate the terminal block for wiring.
2. Connect the incoming 220VAC/240V power lines (L1, L2) to the designated input terminals on the timer.
3. Connect the load wires (T1, T2) to the designated output terminals.
4. Įsitikinkite, kad visos jungtys yra sandarios ir saugios.
5. Close and seal the weatherproof enclosure properly.
6. Restore power at the circuit breaker. The timer display should illuminate.

6. Naudojimo instrukcijos

6.1. Initial Setup (Setting Current Time and Day)

1. Paspauskite P button once to enter time setting mode. The hour display will flash.
2. Naudokite H+ mygtuką, norėdami nustatyti esamą valandą.
3. Naudokite M+ mygtuką, norėdami nustatyti dabartinę minutę.
4. Naudokite D+ mygtuką, norėdami nustatyti dabartinę savaitės dieną.
5. Paspauskite P button again to save the settings and exit time setting mode.

6.2. Įjungimo/išjungimo tvarkaraščių programavimas

The timer supports up to 16 ON/OFF programs. Each program can be set for a specific day or combination of days.

1. Paspauskite P button repeatedly until "1 ON" appears on the display. This is the first ON program.
2. Naudokite D+ , kad pasirinktumėte norimą (-as) šios programos dieną (-as). Galimos parinktys: atskiros dienos, darbo dienos, savaitgaliai arba visos 7 dienos.
3. Naudokite H+ ir M+ , kad nustatytumėte norimą ĮJUNGIMO laiką.
4. Paspauskite P again. "1 OFF" will appear.
5. Naudokite D+ to select the desired day(s) for this OFF program (usually matching the ON program).
6. Naudokite H+ ir M+ to set the desired OFF time.
7. Pakartokite 1–6 veiksmus, jei norite pridėti daugiau ĮJUNGIMO/IŠJUNGIMO programų (iki 16).
8. Nustatę visas norimas programas, paspauskite MANUAL C/R button to return to normal operating mode. Ensure "AUTO" is displayed for programmed operation.

6.3. Rankinis nepaisymas

The MANUAL C/R button allows you to temporarily override the programmed schedule.

• Paspauskite MANUAL C/R pakartotinai, kad perjungtumėte režimus:
• AUTOMATINIS: The timer operates according to the programmed schedules.
• ĮJUNGTA: The connected device remains continuously ON, overriding all programs.
• IŠJUNGTA: The connected device remains continuously OFF, overriding all programs.

7. Priežiūra

7.1. Akumuliatoriaus atsarginė kopija

The timer includes a 3-year battery backup to retain settings during power outages. If the display becomes dim or settings are lost frequently, the internal battery may need replacement. This should be performed by a qualified technician.

7.2. Valymas

Korpuso išorę nuvalykite minkšta,amp cloth. Do not use abrasive cleaners or solvents. Ensure the enclosure remains sealed to maintain its weatherproof rating.

8. Problemų sprendimas

9. Specifikacijos

10. Garantija ir palaikymas

Migro products are manufactured to high-quality standards. For warranty information, technical support, or to report issues, please contact your retailer or the manufacturer directly. Keep your purchase receipt as proof of purchase.

For assistance, refer to the contact information provided with your purchase or visit the official Migro websvetainę.