ONVIAN 2000 liumenų įkraunamo dviračio priekinio žibinto naudotojo vadovas

1. Įvadas

Thank you for choosing the ONVIAN 2000 Lumen Rechargeable Bike Headlight. This manual provides essential information for the safe and effective use of your new bike light. Please read it thoroughly before installation and operation, and retain it for future reference.

2. Saugos informacija

• Prieš važiuodami visada įsitikinkite, kad žibintas yra tvirtai pritvirtintas.
• Nežiūrėkite tiesiai į šviesos spindulį, kad išvengtumėte laikino regėjimo sutrikimo.
• Saugokite šviesą nuo vaikų.
• Use only the provided USB-A to USB-C cable for charging. Using other USB-C cables or power delivery (PD) chargers may not work or could potentially damage the device due to non-standard USB-C implementation.
• Avoid disassembling the light, as this may void the warranty and cause damage.
• Ensure the USB-C port cover is properly sealed when not charging to maintain water resistance.

3. Pakuotės turinys

Patikrinkite, ar pakuotėje yra visi reikalingi daiktai:

• ONVIAN 2000 Lumen Bike Headlight
• Aluminum Alloy Handlebar Bracket
• USB-A į USB-C įkrovimo laidas
• Various Shims and Non-slip Pads for Handlebar Mounting

4. Produkto ypatybės

• Ryškumas: Up to 2000 Lumens for enhanced visibility.
• Apšvietimo režimai: Four distinct modes: Low Beam, High Beam, Low+High Beam, and Flashing.
• Baterija: Integrated 4000mAh rechargeable Lithium-Ion battery.
• Įkrovimas: USB-C port (5V/2A input) with blue power indicators.
• Konstrukcija: Durable aluminum alloy housing.
• Atsparumas vandeniui: IPX5 atsparumo vandeniui įvertinimas.
• Montavimas: Tool-free mounting system for handlebars 20-30mm in diameter.
• Beam Design: German anti-glare design to prevent dazzling oncoming traffic and pedestrians.

Image: Key features of the ONVIAN Bike Headlight, including its 2000 lumen output and multiple modes.

Image: Illustration of the anti-glare German design, demonstrating how it prevents blinding pedestrians and drivers.

5. Sąranka ir diegimas

The ONVIAN bike headlight features a tool-free installation process.

1. Prepare the Bracket: Select the appropriate shims and non-slip pads to match your handlebar diameter (20-30mm). Place them inside the handlebar connector.
2. Pritvirtinkite prie vairo: Position the bracket on your bicycle handlebar. Tighten the knob by hand until the bracket is secure and does not move freely.
3. Priekinio žibinto montavimas: Slide the ONVIAN headlight onto the bracket until it clicks into place. Ensure it is firmly seated.
4. Sureguliuoti kampą: The headlight can be easily twisted and adjusted to the desired angle for optimal illumination.
5. Pašalinimas: To remove, simply twist the light off the bracket. The bracket can remain on the handlebar.

Image: Step-by-step installation guide for the bike headlight on a handlebar.

6. Naudojimo instrukcijos

The ONVIAN bike headlight features a single ON/OFF button to control all lighting modes.

1. Maitinimas: Press the ON/OFF button located on the side of the light to turn it on.
2. Ciklo režimai: Each subsequent press of the ON/OFF button will cycle through the four available lighting modes in the following order:
   • Artimosios šviesos: The two outer lights illuminate.
   • Tolimosios šviesos: The center light illuminates.
   • Low + High Beam: All three lights illuminate for maximum brightness.
   • Mirksi: All lights flash.
3. Išjungti: After cycling through all modes, pressing the button again will turn the light off.

Image: Visual representation of the four distinct lighting modes.

7. Įkrovimo instrukcijos

The bike headlight is equipped with a built-in 4000mAh rechargeable battery.

1. Prijunkite įkroviklį: Open the protective cover over the USB-C port on the side of the light. Connect the provided USB-A to USB-C charging cable to the light and a compatible 5V/2A USB power source.
2. Monitoriaus įkrovimas: Blue power indicator lights on the side of the light will illuminate to show charging progress.
3. Visas įkrovimas: A full charge typically takes approximately 4.5 hours. All blue indicator lights will remain solid when fully charged.
4. Baterijos veikimo laikas: The light offers a run time of 2-3.5 hours on low and flash modes, and up to 4 hours on high beam, depending on the selected mode.
5. Seal Port: After charging, ensure the USB-C port cover is securely closed to maintain the light's waterproof integrity.

Image: The USB-C charging port and battery indicator lights during charging.

Image: Battery specifications and estimated run times for each lighting mode.

8. Priežiūra

• Valymas: Wipe the light's exterior with a soft, damp audinys. Nenaudokite abrazyvinių valiklių ar tirpiklių.
• Saugykla: Store the light in a cool, dry place when not in use. For long-term storage, charge the battery to approximately 50% every 3-6 months to prolong battery life.
• Atsparumas vandeniui: Regularly check the USB-C port cover for proper sealing to ensure water resistance.
• Akumuliatoriaus priežiūra: Venkite dažnai visiškai iškrauti akumuliatorių, nes tai gali sutrumpinti jo tarnavimo laiką.

9. Problemų sprendimas

10. Specifikacijos

11. Garantija ir palaikymas

For warranty information or technical support, please contact Onvian customer service through the retailer where the product was purchased or visit the official Onvian store page:

Visit the Onvian Store

Please have your model number (B0CKP7NPWT) and purchase details ready when contacting support.