I have a Vector SS16LVC 1600. My charging cord is defective and does not charge the unit. Where can I get a replacement plug-in adapter and cord?

The VECTOR SS16LV (and SS16LVC) 1600 Peak Amp Jump Starter is designed to be charged via a standard USB-C input port. Because it uses a universal USB-C connection, you have several options for replacing a defective cord:Standard USB-C Cable: You can use any high-quality USB Type-A to USB Type-C or USB Type-C to USB Type-C cable.AC Adapter: The unit originally comes with an AC charger that connects to the USB cable. You can use a standard 5V USB wall masonry (like a smartphone charger), though a higher amperage charger (such as 2.1A or 3.1A) will charge the unit faster.Manufacturer Support: For official replacement parts specifically from the manufacturer, you should contact Baccus Global LLC, as they handle the warranty and support for VECTOR products. You can also check the official VECTOR Store on Amazon.To charge the unit with a new cable: Plug the USB-C end into the jump starter's input port (located under the protective flap) and the other end into your AC or DC USB adapter. The blue LED lights will flash to indicate charging and stay solid when the unit is full.

VECTOR SS16LV 1600 Peak Amp Ličio jonų užvedimo naudotojo vadovas

Įvadas

„VECTOR SS16LV 1600 Peak“ Amp Li-Ion Jump Starter Portable is a compact and powerful device designed for jump-starting vehicles and charging mobile devices. It features integrated reverse polarity protection for safe operation and a built-in work light for convenience in low-light conditions. Its lithium-ion battery can hold a charge for up to 12 months, making it a reliable emergency tool.

VECTOR SS16LV Jump Starter with attached clamps

Figure 1: The VECTOR SS16LV 1600 Peak Amp Lithium Jump Starter with its heavy-duty powder-coated clamps.

Saugos informacija

Prieš naudodami šį gaminį, visada perskaitykite ir supraskite visus saugos įspėjimus ir instrukcijas. Nesilaikant įspėjimų ir instrukcijų, gali kilti elektros smūgis, gaisras ir (arba) sunkūs sužalojimai.

Laikyti vaikams nepasiekiamoje vietoje.
Saugokite užvedimo įrenginį nuo lietaus ar drėgmės.
Ensure proper polarity connection to avoid damage to the device or vehicle. The Engine Start Smart Controller provides reverse polarity protection.
Neardykite įrenginio. Visus techninės priežiūros darbus patikėkite kvalifikuotiems techninės priežiūros darbuotojams.
Kai nenaudojate, laikykite vėsioje, sausoje vietoje.

Figure 2: The Reverse Polarity Alarm feature ensures safe connections.

Kas yra dėžutėje

Patikrinkite, ar visi komponentai yra ir yra geros būklės:

VECTOR SS16LV Lithium Jump Starter Unit
Smart Controller with Powder Coated Metal Clamps (raudona ir juoda)
Kintamosios srovės įkroviklis
DC įkroviklis
USB įkrovimo laidas

Contents of the VECTOR SS16LV box including jump starter, smart controller, clamps, AC and DC chargers, and USB cable.

Figure 3: Included components: Jump Starter, Smart Controller, AC and DC Chargers, and USB Charging Cable.

Produkto savybės

„1600 Peak“ Amps: Instantly jump starts cars and trucks up to 8-cylinders.
USB įkroviklis: Equipped with USB Type-A & Type-C (3.1 Amp) ports for charging mobile devices.
Įkraunama ličio baterija: Retains charge for up to 12 months. Comes with AC, DC, and USB adapters for versatile recharging.
Saugus naudojimas: The Engine Start Smart Controller provides reverse polarity protection, ensuring correct jumper cable connection.
Nešiojamas dizainas: Compact size (3"D x 1"W x 7"H) and lightweight (12.8 ounces) for easy storage and transport.
LED darbo lemputė: Built-in LED light assists in dark environments.

Icons representing features: Lithium Rechargeable, LED Work Light, Type-C USB Port, Type-A USB Port, Up to 30x Jump Starts, Works with V8 Engines.

Figure 4: Key features of the SS16LV Jump Starter.

Dimensions of the jump starter (3 inches deep, 7 inches high) and its weight (0.86 lbs).

Figure 5: Compact dimensions and lightweight design for portability.

Išsamus view of the VECTOR SS16LV jump starter with labels for Power Button, Smart Controller, Powder Coated Metal Clamps, LED Light, 3.1A USB-A & Type-C Ports, AC and DC Chargers, and USB Charging Cable.

Figure 6: Labeled components of the SS16LV unit and accessories.

Šoninė view of the VECTOR SS16LV jump starter showing the input/output ports covered by a red flap.

7 pav.: šonas view showing the protected input/output ports.

Sąranka

Pradinis mokestis

Before first use, fully charge the VECTOR SS16LV jump starter. The unit comes partially charged from the factory.

Connect the provided AC charger to a standard wall outlet.
Plug the USB charging cable into the AC charger and then into the USB-C input port on the jump starter.
The blue LED indicator lights on the jump starter will illuminate and flash to indicate charging. All three lights will be solid blue when fully charged.
Alternatively, use the DC charger to charge the unit from a vehicle's 12V accessory outlet.

It is recommended to recharge the unit every 3-6 months to maintain optimal battery health, especially if not used regularly.

Naudojimo instrukcijos

Peršokti užvedant transporto priemonę

The VECTOR SS16LV is designed to jump start vehicles with up to 8-cylinder engines.

Įsitikinkite, kad starteris yra visiškai įkrautas.
Connect the Smart Controller's plug into the jump starter's dedicated port (usually covered by a red flap).
Prijunkite raudoną (+) jungtįamp prie teigiamo (+) automobilio akumuliatoriaus gnybto.
Prijunkite juodą (-) jungtįamp prie neigiamo (-) automobilio akumuliatoriaus gnybto arba tvirtos, nedažytos metalinės automobilio važiuoklės dalies, esančios toliau nuo akumuliatoriaus.
Observe the indicator light on the Smart Controller. A solid green light indicates a correct connection and readiness to start. If a red light or alarm sounds, check connections for reverse polarity.
Užveskite transporto priemonę.
Kai tik transporto priemonė užsives, nedelsdami atjunkite laidąampnuo automobilio akumuliatoriaus pirmiausia atjunkite juodą (-) laidąamp, tada raudonas (+) clamp.
Disconnect the Smart Controller from the jump starter.

Using as a Power Bank (USB Charging)

The SS16LV can charge various USB-powered devices.

Open the protective flap covering the USB ports on the jump starter.
Connect your device's USB charging cable to either the USB Type-A or USB Type-C (3.1 Amp) port on the jump starter.
Kitą kabelio galą prijunkite prie mobiliojo prietaiso.
Press the power button on the jump starter to begin charging. The blue LED lights indicate the remaining battery level.
Atjunkite įrenginį, kai įkrovimas bus baigtas.

A hand plugging a USB cable into a smartphone, with the VECTOR jump starter in the background, indicating its use as a power bank.

Figure 8: Charging a mobile device using the USB port.

LED darbo žibinto naudojimas

The built-in LED work light provides illumination in dark conditions.

Press the power button once to check the battery level (blue LEDs).
Press the power button a second time to turn on the LED work light.
Press the power button a third time to activate the SOS flash mode.
Press the power button a fourth time to activate the strobe light mode.
Press the power button a fifth time to turn off the light.

Close-up of the VECTOR jump starter's end showing the bright LED work light illuminated.

Figure 9: The integrated LED work light provides illumination.

Priežiūra

Valymas: Nuvalykite įrenginį sausa, minkšta šluoste. Nenaudokite abrazyvinių valiklių ar tirpiklių.
Saugykla: Store the jump starter in a cool, dry place away from direct sunlight and moisture. Ensure it is fully charged before storing for extended periods.
Akumuliatoriaus priežiūra: Recharge the unit every 3-6 months to prolong battery life, even if not used.

Trikčių šalinimas

Problema	Galima priežastis	Sprendimas
Užvedimo jungiklis neįsijungia.	Baterija visiškai išsikrovusi.	Charge the jump starter fully using the provided AC or DC charger.
Transporto priemonė neužsiveda nuo kito variklio.	Neteisingas klamp jungtis (atvirkštinis poliškumas). Automobilio akumuliatorius yra smarkiai pažeistas. Užvedimo akumuliatoriaus įkrova maža.	Ensure correct positive (+) and negative (-) connections; the Smart Controller will indicate errors. Check jump starter battery level and recharge if necessary. Consult a professional if vehicle battery is faulty.
USB įrenginiai neįkraunami.	Jump starter is off. USB laidas sugedęs. Įrenginys nesuderinamas.	Press the power button to activate USB output. Try a different USB cable. Ensure your device is compatible with USB charging.
LED work light not working.	Jump starter is off. Baterija visiškai išsikrovusi.	Press the power button multiple times to cycle through light modes. Charge the jump starter.

Specifikacijos

Modelis: SS16LV
Prekinis ženklas: VEKTORIAUS
Didžiausia išėjimo srovė: 1600 Amps
Amppakilimas: 1600 Amps
Gaminio matmenys: 3 "D x 1" P x 7" A
Prekės svoris: 12.8 uncijos
Baterijos tipas: Ličio jonų (reikalingas 1)
USB išvestis: USB Type-A & Type-C (3.1 Amps)
Gamintojas: Baccus Global LLC
UPC: 814632015246

Garantija ir palaikymas

Dėl garantijos informacijos ar techninės pagalbos kreipkitės į oficialią gamintojo svetainę. websvetainėje arba susisiekite su jų klientų aptarnavimo tarnyba. Išsaugokite pirkimo kvitą kaip pirkimo įrodymą.

Gamintojas: Baccus Global LLC

Norėdami gauti daugiau pagalbos, apsilankykite VECTOR Store on Amazon.

VECTOR SS16LV