ARRMA Wheel Axle and Hub Set (ARA311178) Instruction Manual

1. Produktas baigtasview

The ARRMA Wheel Axle and Hub Set, model ARA311178, is designed for RC vehicles. This high-quality set is manufactured from durable material to provide long-lasting performance, especially under extreme bashing conditions. It ensures a precise fit for your vehicle and is built for toughness.

Image 1.1: Components of the ARRMA Wheel Axle and Hub Set.

2. Saugos informacija

ĮSPĖJIMAS:

• Prieš naudodami perskaitykite VISĄ naudojimo vadovą, kad susipažintumėte su gaminio funkcijomis. Netinkamai naudojant gaminį galite sugadinti gaminį, asmeninį turtą ir rimtai susižaloti.
• Tai sudėtingas hobio produktas. Jis turi būti naudojamas atsargiai ir sveiku protu ir reikalauja tam tikrų pagrindinių mechaninių gebėjimų.
• Jei nesinaudosite šiuo produktu saugiai ir atsakingai, galite susižaloti arba sugadinti gaminį ar kitą turtą.
• Šis produktas nėra skirtas vaikams be tiesioginės suaugusiųjų priežiūros.
• Nenaudokite su nesuderinamais komponentais ir nekeiskite šio gaminio jokiu būdu kitaip, nei nurodyta Horizon Hobby, LLC.
• The product manual contains instructions for safety, operation, and maintenance. It is essential to read and follow all the instructions and warnings in the manual, prior to assembly, setup, or use, in order to operate correctly and avoid damage or serious injury.

3. Pakuotės turinys

The ARRMA Wheel Axle and Hub Set (ARA311178) package includes the following components:

• 4x ratų ašys
• 4 x Wheel Hexes
• 4 x Stub Axles

Note: The "Wheel Axle and Hub Set" listed in the 'whats_in_the_box' is a general term for these combined components.

4. Montavimo instrukcijos

Follow these steps to install the ARRMA Wheel Axle and Hub Set onto your RC vehicle:

1. Pašalinkite senus komponentus: Carefully remove the existing wheel axles, hexes, and stub axles from your RC vehicle. Refer to your vehicle's specific manual for detailed disassembly instructions if needed.
2. Install New Axles: Install the new ARRMA wheel axles into the appropriate locations on your RC vehicle.
3. Attach Hexes and Stub Axles: Securely attach the new wheel hexes and stub axles. Ensure all parts are correctly oriented and seated.
4. Saugios tvirtinimo detalės: Use the appropriate tools to securely fasten all components. Double-check that all screws, pins, or clips are tightened to the manufacturer's specifications.
5. Patikrinkite lygiavimą: After installation, ensure that the wheels are properly aligned and spin freely without obstruction. Check for any excessive play or binding.

Always use appropriate tools and follow safety precautions during installation.

5. Priežiūra

To ensure the longevity and optimal performance of your ARRMA Wheel Axle and Hub Set, consider the following maintenance tips:

• Reguliarus patikrinimas: Periodically inspect the wheel axles, hexes, and stub axles for signs of wear, damage, or bending. Replace any damaged components immediately.
• Valymas: After use, especially in dirty or wet conditions, clean the components to remove dirt, debris, and moisture. A soft brush and compressed air can be effective.
• Tepimas: While these parts typically do not require extensive lubrication, ensure that any moving parts they interact with (e.g., bearings) are properly maintained according to your RC vehicle's manual.
• Saugios tvirtinimo detalės: Regularly check that all fasteners holding the axles and hubs are tight. Vibrations during operation can sometimes loosen screws.

6. Specifikacijos

7. Garantija ir palaikymas

For warranty information, technical support, or replacement parts, please contact ARRMA or Horizon Hobby, LLC directly through their official websvetainėje arba klientų aptarnavimo kanaluose. Išsaugokite pirkimo kvitą kaip pirkimo įrodymą.

You can visit the official ARRMA store for more information: ARRMA Store on Amazon