1. Įvadas
Thank you for choosing PAUTIX 5V USB COB LED Strip Lights. This manual provides essential information for the safe and efficient use of your LED strip lights. Please read these instructions carefully before installation and operation.
Pakuotės turinys:
- 1 x PAUTIX 5V USB COB LED Strip Light (6.56ft / 2m, 3000K Warm White)
- 1 x RF Wireless Remote Control
- 1 x USB Power Cable with In-line 3-button Dimmer
Image: Contents of the PAUTIX LED strip light package, showing the coiled strip, USB cable with in-line dimmer, and RF remote control.
2. Saugos informacija
- UL sąraše: This product is UL-Listed, ensuring compliance with safety standards.
- Žemas tomastage: Operates on 5V DC, making it safe to touch for pets and children.
- Naudoti tik patalpose: The LED strip has an IP30 rating and is designed exclusively for indoor environments. Avoid exposure to water or high humidity.
- Maitinimo šaltinis: Use only with a 5V/2A (or higher) USB power source. Insufficient power may cause flickering or improper operation.
- Montavimas: Ensure the mounting surface is clean, dry, and smooth for optimal adhesive performance.
- Pjovimas: The strip can be cut at designated marks (every 12mm/0.47in). Cutting at non-marked points will damage the circuit.
- Šiluma: While COB LEDs produce minimal heat, ensure proper ventilation when installed in enclosed spaces.
3. Sąranka ir diegimas
- Paruoškite paviršių: Clean the desired mounting surface thoroughly to remove dust, oil, or moisture. A clean, dry, and smooth surface ensures strong adhesion.
- Išmatuokite ir iškirpkite (nebūtina): If a shorter length is required, measure the desired length and cut the LED strip only at the designated cutting marks (indicated by copper pads).
Image: Diagram showing the cuttable sections of the LED strip, marked every 12mm/0.47in, with a pair of scissors indicating where to cut.
- Lipnus nuplėšiamas pagrindas: Carefully peel off the protective film from the 3M self-adhesive backing on the LED strip.
- Pritvirtinkite juostelę: Press the LED strip firmly onto the prepared surface, ensuring even contact along its entire length.
Image: Four-step visual guide demonstrating how to install the LED strip: clean the surface, peel the backing, paste the strip, and turn on the light.
- Prijunkite maitinimą: Plug the USB connector of the LED strip into a compatible 5V/2A (or higher) USB power source (e.g., TV USB port, computer, power bank, USB wall adapter).
Image: Various USB power sources compatible with the PAUTIX LED strip, including a USB charger, power bank, laptop/TV, 5V battery pack, and USB socket.
4. Naudojimo instrukcijos
RF Wireless Remote Control:
The included RF remote control allows for convenient operation from a distance, even without direct line of sight (360° control). It features:
- Įjungta/Išjungta: Įjunkite arba išjunkite šviesas.
- Ryškumo reguliavimas: Increase or decrease brightness (5 levels).
- Laikmačio funkcijos: Set the lights to turn off automatically after 30 minutes, 1 hour, 2 hours, 3 hours, or 4 hours. Press 'C' to cancel the timer.
- Atminties funkcija: The lights will restore to their last brightness setting when turned back on.
Image: The PAUTIX LED strip light coiled with the RF wireless remote control and USB power cable visible. The remote shows buttons for power, brightness, and timer settings.
Image: A child sleeping with the LED strip lights providing soft illumination, illustrating the timer function of the RF remote control.
In-line 3-button Dimmer:
The USB power cable includes an in-line controller with three buttons for basic operation:
- Maitinimo mygtukas: Turns the lights on/off.
- Brightness Up (+): Padidina ryškumą.
- Brightness Down (-): Sumažina ryškumą.
Image: A living room scene with LED strip lights installed, showing the in-line dimmer and its buttons for adjusting brightness from 10% to 100%.
5. Priežiūra
- Valymas: Gently wipe the LED strip with a dry, soft cloth if it accumulates dust. Do not use liquid cleaners or immerse in water.
- Klijai: The 3M adhesive is strong. If repositioning is necessary, do so carefully to avoid damaging the strip or the surface.
- Saugykla: When not in use for extended periods, store the LED strip in a cool, dry place, away from direct sunlight.
6. Problemų sprendimas
| Problema | Galima priežastis | Sprendimas |
|---|---|---|
| Šviesos neįsijungia. | Nėra maitinimo, atsilaisvinęs kontaktas, sugedęs USB prievadas. |
|
| Šviesos mirga. | Nepakankamas maitinimo šaltinis. |
|
| Nuotolinio valdymo pultas neveikia. | Battery issue, interference. |
|
| Juostelės dalys nešviečia. | Damage to the strip. |
|
7. Specifikacijos
- Modelis: RF-SWW320COB-USB-2M-3000K-NEW
- Prekinis ženklas: PAUTIX
- Šviesos šaltinio tipas: COB šviesos diodas
- Spalvos temperatūra: 3000K šiltai balta
- Ilgis: 6.56 pėdos (2 metro)
- LEDs per Meter: 320 šviesos diodų/m (iš viso 640 šviesos diodų)
- ttage: 5 volto (DC)
- Vattage: 9.5 vatų
- Šviesos srautas: 1200 liumenų
- Spalvų perteikimo indeksas (CRI): >90
- Ypatingos savybės: 5V USB Powered, RF Remote Control, UL-Listed, Dimmable, Dotless, Flicker-Free, Memory Function, Timer
- Gyvenimo trukmė: >65,000 valandų
- Apsaugos nuo patekimo (IP) įvertinimas: IP30 (naudoti tik patalpose)
- Medžiaga: 3M Adhesive, COB LED Light Source, Double Layer Pure Copper PCB, Plastic
- Maitinimo kabelio ilgis: 2.6 pėdų
- UPC: 717994811924
8. Garantija ir palaikymas
PAUTIX is committed to customer satisfaction. This product comes with a 5 metų garantija, užtikrinant kokybę ir patikimumą.
If you encounter any issues or have questions regarding your PAUTIX LED Strip Lights, please contact our customer support team. We aim to respond within 24 hours and provide a prompt resolution.
Kontaktinė informacija: Please refer to the product packaging or the official PAUTIX websvetainę, kurioje rasite naujausią klientų aptarnavimo kontaktinę informaciją.
