Diyeeni XT30 XT60 FPV Drone Smoke Stopper User Manual

1. Įvadas

The Diyeeni XT30 XT60 FPV Drone Smoke Stopper is a safety device designed to protect your FPV drone and its components from damage during initial power-on or after modifications. It acts as a resettable fuse, limiting current flow in case of a short circuit, indicated by an LED and an alarm buzzer. This device is compatible with 2-6S RC quadcopters and features both XT30 and XT60 connectors for versatile use.

2. Saugos informacija

• Svarbu: Only one battery can be inserted into either the XT30 or XT60 input jack at a time. Do not connect batteries to both input jacks simultaneously.
• The product input voltage is 2-6S. Ensure your drone's components can withstand this voltage asortimentas.
• Do not attempt to fly or push the throttle with the smoke stopper connected, as it has a maximum output current limit of 1A. This device is for initial power-on testing only.
• Always inspect the smoke stopper for any visible damage before each use.
• Saugokite įrenginį nuo vandens ir ekstremalių temperatūrų.
• This device is not a substitute for proper wiring and component selection.

3. Produktas baigtasview

The Diyeeni XT30 XT60 FPV Drone Smoke Stopper is a compact device featuring input and output connectors, an LED indicator, and an alarm buzzer.

3.1 pav. Bendra view of the Diyeeni XT30 XT60 FPV Drone Smoke Stopper.

• XT30/XT60 Input Connectors: For connecting your drone battery.
• XT30/XT60 Output Connectors: For connecting to your drone's power input.
• LED indikatorius: Provides visual status updates.
• Pavojaus signalas: Provides audible alerts for short circuits.

Figure 3.2: Detail of the XT30 and XT60 input/output connectors.

4. Specifikacijos

Figure 4.1: Back of the smoke stopper displaying input voltage ir dabartinės specifikacijos.

5. Sąranka

Follow these steps to properly connect the smoke stopper to your FPV drone:

1. Identifikuokite jungtis: Determine whether your drone battery and drone power input use XT30 or XT60 connectors. The smoke stopper provides both options.
2. Prisijungimas prie drono: Plug the appropriate output connector (XT30 or XT60) of the smoke stopper into your drone's power input port.
3. Prijunkite akumuliatorių: Plug your drone battery into the corresponding input connector (XT30 or XT60) on the smoke stopper. Ensure only one battery is connected at a time.
4. Patikrinkite ryšį: Dar kartą patikrinkite visas jungtis, kad jos būtų tvirtos ir tinkamai orientuotos.

Figure 5.1: The smoke stopper with both XT30 and XT60 connectors visible for connection.

6. Operacija

Once connected, the smoke stopper will monitor the current flow to your drone.

6.1 LED Indicator and Alarm Buzzer

• Normalus veikimas: When the drone is powered on and no short circuit is detected, the LED indicator will remain vientisa žalia. This indicates a safe power-on.
• Short Circuit Detected: If a short circuit or excessive current draw (above 1.2A trip current) is detected, the LED indicator will turn išjungti, and the alarm buzzer will start pypsi. This alerts you to an issue, preventing potential damage to your drone components.

6.1 paveikslas: viršuje view highlighting the LED indicator and alarm buzzer.

6.2 Post-Detection

If the smoke stopper detects a short circuit:

1. Immediately disconnect the battery from the smoke stopper.
2. Inspect your drone's wiring and components for any visible shorts, incorrect connections, or damaged parts.
3. Rectify any identified issues before attempting to power on again.
4. Once the issue is resolved, reconnect the smoke stopper and battery to re-test. The smoke stopper will automatically reset once the short circuit condition is removed.

7. Priežiūra

• Keep the smoke stopper clean and free from dust and debris.
• Laikyti sausoje vietoje kambario temperatūroje.
• Regularly check the connectors for wear or damage. Replace the device if connectors are loose or damaged.
• Do not attempt to open or modify the device, as this will void any potential warranty and may cause malfunction.

8. Problemų sprendimas

9. Garantija ir palaikymas

For warranty information or technical support, please contact the manufacturer, Diyeeni, through their official channels or the retailer where the product was purchased. Please provide your model number (Diyeeni1zo2fibgvs) and purchase details when seeking support.

Manufacturer: Diyeeni

Model Number: Diyeeni1zo2fibgvs