DAKASON 4FT LED Linear Light Fixture User Manual

1. Įvadas

This manual provides detailed instructions for the safe installation, operation, and maintenance of your DAKASON 4FT LED Linear Light Fixture. Please read this manual thoroughly before installation and retain it for future reference. This fixture is designed for commercial and residential indoor illumination, offering selectable wattage ir spalvų temperatūros nustatymai.

2. Saugos instrukcijos

ĮSPĖJIMAS: Elektros smūgio pavojus. Prieš montuodami ar atlikdami techninę priežiūrą, atjunkite maitinimą.

• Prieš pradėdami montavimą, įsitikinkite, kad pagrindinis maitinimo šaltinis yra išjungtas grandinės pertraukikliu.
• Montavimą turi atlikti kvalifikuotas elektrikas, laikydamasis visų vietinių ir nacionalinių elektros kodeksų.
• Do not install in wet locations. This fixture is for indoor use only.
• Nekeiskite įrenginio. Bet kokie pakeitimai gali panaikinti garantiją ir sukelti pavojų saugai.
• Atsargiai elkitės su armatūra, kad nepažeistumėte jos.
• Įsitikinkite, kad visos jungtys yra saugios ir tinkamai izoliuotos.

3. Pakuotės turinys

Prieš pradėdami diegti, patikrinkite, ar yra visi komponentai:

• DAKASON 4FT LED Linear Light Fixture (4 units for 4-pack)
• Mounting Hardware (Ceiling Mount Clips, Suspension Ropes, Screws, Wall Anchors)
• Instrukcijų vadovas

Figure 1: Product dimensions and included mounting hardware. The image displays the fixture's length (45.7 inches), width (2.98 inches), and height (2 inches), along with two ceiling mount clips, four screws, four wall anchors, and two suspension ropes.

4. Sąranka ir diegimas

The DAKASON 4FT LED Linear Light Fixture supports both suspension mount and flush mount installations.

4.1. Prieš montavimą

• Išjunkite maitinimą prie grandinės pertraukiklio.
• Išpakuokite įrenginį ir patikrinkite, ar nėra pažeidimų.
• Determine the desired mounting method (suspension or flush).

4.2. Laidų sujungimo instrukcijos

This fixture requires hardwiring. A power cable is NOT included and must be supplied by the installer.

1. Open the end cap of the fixture by pulling it up as indicated by the arrow.
2. Connect the electrical wires using appropriate wire caps (not included).
3. Prijunkite Juoda laidą nuo armatūros iki Tiesiogiai (L) laidą iš maitinimo šaltinio.
4. Prijunkite Baltas laidą nuo armatūros iki Neutralus (N) laidą iš maitinimo šaltinio.
5. Prijunkite Žalia laidą nuo armatūros iki Žemė (GND) laidą iš maitinimo šaltinio.
6. For 0-10V dimming, connect the Violetinė laidas prie Pritemdyti+ viela ir Pilka laidas prie Pritemdyta wire from the 0-10V dimmer (dimmer not included).
7. Įsitikinkite, kad visos jungtys yra saugios ir izoliuotos.
8. Close the end cap securely after wiring.

Figure 2: Wiring connections inside the fixture. Note that wire caps are for hardwire, and the power cord is not included.

4.3. Suspension Mount Installation

1. Mark the desired locations for the suspension ropes on the ceiling.
2. Drill pilot holes and install appropriate anchors/screws for the suspension rope mounts.
3. Attach the suspension ropes to the ceiling mounts and to the fixture's mounting brackets.
4. Adjust the cable length (up to 78 inches) by pressing the release button on the cable gripper to achieve the desired height.
5. Ensure the fixture is level and securely suspended.

Figure 3: Adjusting suspension cable length. Press the button to release and adjust the cable.

4.4. Įleidžiamasis montavimas

1. Mark the desired locations for the ceiling mount clips on the ceiling.
2. Drill pilot holes and install appropriate anchors/screws for the ceiling mount clips.
3. Securely attach the ceiling mount clips to the ceiling.
4. Snap the linear light fixture into the installed ceiling mount clips. Ensure it is firmly seated.

4 pav. Pvzamples of Suspension Mount (left) and Flush Mount (right) installations.

4.5. Kelių rungtynių sujungimas

Multiple DAKASON linear light fixtures can be linked in continuous runs up to 15 fixtures at 120V.

1. Ensure power is off before linking.
2. Align the end of one fixture with the linking connector of another.
3. Slide the fixtures together until they securely connect.
4. Ensure electrical continuity and mechanical stability between linked fixtures.

Figure 5: Steps for linking multiple fixtures. Up to 15 lights can be linked at 120Vac.

5. Naudojimo instrukcijos

After installation, restore power to the fixture. The DAKASON LED Linear Light Fixture offers selectable wattage ir spalvų temperatūros nustatymai.

5.1. Selecting Wattage (Galia)

The fixture has a selectable wattage switch located on the side. This allows you to choose between 30W, 40W, or 50W to adjust the light output.

• 30 W: Approximately 3,000 lumens.
• 40 W: Approximately 4,000 lumens.
• 50 W: Approximately 5,000 lumens.

CAUTION: Ensure power is OFF before adjusting the wattage switch to prevent electrical hazards.

Figure 6: Power selectable switch (50W/40W/30W) and corresponding light levels.

5.2. Spalvos temperatūros (CCT) pasirinkimas

The fixture also features a selectable color temperature switch, allowing you to choose between 3000K, 4000K, or 5000K.

• 3000 K (šiltai balta): Provides a warm, inviting light.
• 4000 K (ryškiai balta): Offers a neutral, balanced light.
• 5000 K (dienos šviesa): Delivers a crisp, bright white light.

CAUTION: Ensure power is OFF before adjusting the CCT switch to prevent electrical hazards.

Figure 7: Color temperature selectable switch (3000K/4000K/5000K).

5.3. 0-10V Dimming

This fixture is compatible with standard 0-10V dimming systems (dimmer not included) for smooth brightness adjustment.

• Connect the fixture's purple and gray dimming wires to a compatible 0-10V dimmer as per the dimmer's instructions.
• Reguliuokite šviesos reguliatorių, kad pasiektumėte norimą šviesos intensyvumą.

Figure 8: 0-10V smooth dimming in an office environment.

6. Priežiūra

The DAKASON LED Linear Light Fixture requires minimal maintenance.

• Valymas: Prieš valydami, įsitikinkite, kad maitinimas išjungtas. Naudokite minkštą, sausą arba šiek tiek sudrėkintą šluostę.amp cloth to wipe the fixture. Do not use abrasive cleaners or solvents.
• Patikra: Periodically inspect the fixture for any signs of damage, loose connections, or wear. If any issues are found, disconnect power and contact a qualified electrician or customer support.
• Šviesos diodai: The LED chips are designed for a long service life (50,000 hours) and are not user-replaceable.

7. Problemų sprendimas

If you experience issues with your fixture, refer to the following table:

If the problem persists after attempting these solutions, please contact DAKASON customer support.

8. Specifikacijos

9. Garantija ir palaikymas

9.1. Informacija apie garantiją

This DAKASON LED Linear Light Fixture is backed by a 5 metų ribota garantija nuo įsigijimo datos. Ši garantija taikoma medžiagų ir gamybos defektams įprasto naudojimo sąlygomis. Ji netaikoma žalai, atsiradusiai dėl netinkamo įrengimo, nelaimingo atsitikimo, netinkamo naudojimo, piktnaudžiavimo ar neleistinų modifikacijų.

Garantinių pretenzijų atveju, prašome išsaugoti pirkimo įrodymą.

9.2. Pagalba klientams

If you have any questions, require technical assistance, or need to make a warranty claim, please contact DAKASON customer support through the retailer where the product was purchased or visit the official DAKASON websvetainė kontaktinei informacijai.

Palaikymas internetu: Visit the DAKASON Store on Amazon