Geevon 86146VA Weather Station and 228646-W Indoor Outdoor Thermometer User Manual

Įvadas

This manual provides detailed instructions for the setup, operation, and maintenance of your Geevon 86146VA Weather Station and 228646-W Indoor Outdoor Thermometer. This device is designed to accurately monitor indoor and outdoor temperature and humidity, offering valuable environmental data for your home or office. Please read this manual thoroughly before use to ensure proper functionality and longevity of your product.

Kas yra dėžutėje

Carefully unpack all components and ensure everything is present:

• 1 x Main Display Unit (Weather Station)
• 3 x belaidžiai nuotolinio valdymo jutikliai
• Tvirtinimo detalės (varžtai, sieniniai inkarai)
• 1 x Naudotojo vadovas (šis dokumentas)

Note: Batteries are not included. The main unit typically requires AAA batteries, and remote sensors usually require AA batteries. Please check the battery compartments for specific requirements.

Sąranka

1. Akumuliatoriaus įdėjimas

For the Main Display Unit:

1. Atidarykite baterijų skyriaus dangtelį pagrindinio įrenginio gale.
2. Insert the required batteries (e.g., 3 x AAA) according to the polarity markings (+ and -).
3. Uždarykite akumuliatoriaus skyriaus dangtelį.

For the Wireless Remote Sensors:

1. Open the battery compartment cover on the back of each remote sensor.
2. Insert the required batteries (e.g., 2 x AA) according to the polarity markings (+ and -).
3. Select a channel (1, 2, or 3) for each sensor using the channel switch inside the battery compartment. Ensure each sensor uses a unique channel.
4. Uždarykite akumuliatoriaus skyriaus dangtelį.

2. Jutiklio išdėstymas

Place the remote sensors in desired outdoor or indoor locations within a 200ft (60m) range of the main unit. For outdoor placement, choose a shaded area protected from direct sunlight and rain to ensure accurate readings and prolong sensor life. Avoid placing sensors near large metal objects or strong electromagnetic interference sources.

3. Pradinis sinchronizavimas

After installing batteries in both the main unit and sensors, the main unit will automatically search for and connect to the remote sensors. This process may take a few minutes. Ensure all sensors are within range during initial setup.

4. Montavimo parinktys

Image: The main display unit can be placed on a tabletop using its integrated stand or mounted on a wall using the keyhole slot. The remote sensor also includes a hang hole for wall mounting.

Vaizdas: Išsamus view of the main unit's tabletop stand and wall mount hang hole, alongside the remote sensor's battery compartment and hang hole, illustrating both tabletop and wall mounting possibilities.

• Stalviršio išdėstymas: The main display unit and remote sensors are equipped with integrated stands for convenient placement on any flat surface.
• Montavimas ant sienos: Both the main display unit and remote sensors feature keyhole slots on their backs for secure wall mounting using the provided screws and anchors.

Naudojimo instrukcijos

1. LCD ekranas viršview

Image: The main display unit features a large LCD screen showing current time, date, indoor temperature and humidity, and readings from up to three remote sensors. Dimensions are also indicated.

The large LCD display provides clear readings for:

• Dabartinis laikas ir data
• Patalpų temperatūra ir drėgmė
• Temperature and Humidity for up to 3 Remote Sensors (Channels 1, 2, 3)
• Comfort Level Indicator (Wet, Comfort, Dry)
• Maksimalios / minimalios temperatūros ir drėgmės įrašai
• Temperatūros tendencijų rodyklės

2. Mygtukų funkcijos

Familiarize yourself with the buttons on your main display unit:

• MEM / ▼ (Down Arrow): Paspauskite, kad view MAX/MIN temperature and humidity records. Hold to clear records. Also used to decrease values in setting mode.
• CH / ▲ (Up Arrow): Press to switch between remote sensor channels (1, 2, 3) or to view indoor readings. Hold to initiate sensor search. Also used to increase values in setting mode.
• ℃/℉ mygtukas: Press to switch between Celsius (℃) and Fahrenheit (℉) temperature units.
• SET mygtukas: Used to enter and confirm settings for time, date, and alarms.
• ĮSPĖJIMO mygtukas: Used to set temperature and humidity alert thresholds.

3. ViewMaksimalių/minimalių įrašų registravimas

Paspauskite MEM button repeatedly to cycle through current readings, maximum readings (MAX), and minimum readings (MIN) for both indoor and remote sensor data. The MAX/MIN data updates every 24 hours. To manually clear the MAX/MIN records, press and hold the MEM mygtuką.

4. Temperatūros vienetų perjungimas

Paspauskite ℃ / ℉ button located on the main unit to toggle between Celsius (℃) and Fahrenheit (℉) temperature displays.

5. Setting Temperature and Humidity Alerts

The device allows you to set custom high and low alert thresholds for temperature and humidity. When the measured value exceeds or falls below these thresholds, an audible alarm will sound.

1. Paspauskite PERSPĖJIMAS button to enter alert setting mode.
2. Naudokite ▲ ir ▼ buttons to adjust the desired high or low temperature/humidity values.
3. Paspauskite PERSPĖJIMAS dar kartą, kad patvirtintumėte kiekvieną nustatymą ir pereitumėte prie kito.
4. Once all alerts are set, the alarm icon will appear on the display, indicating that alerts are active.

6. Monitoring Multiple Zones

Image: The weather station can monitor up to four zones simultaneously: one indoor (main unit's sensor) and three remote locations (e.g., garden, bedroom, wine cellar) using the wireless sensors.

With three wireless remote sensors, you can monitor temperature and humidity in up to four different locations (one indoor via the main unit, and three remote). Press the CH button to cycle through the readings of Channel 1, Channel 2, Channel 3, and the indoor reading.

7. Komforto lygio indikatorius

Image: The display shows temperature and humidity for indoor and three remote channels, along with comfort icons. Definitions for 'COM' (Comfort), 'DRY', and 'WET' humidity ranges are provided.

The display features a comfort level indicator to quickly assess the environment:

• COM (Patogus): Humidity between 40% and 70%, and temperature between 20℃ and 28℃ (68℉ and 82.4℉).
• DŽIOVAS: Drėgmė žemiau 40%.
• Šlapias: Humidity above 70%.

Priežiūra

1. Baterijos keitimas

When the battery indicator appears on the display, replace the batteries in the main unit or the respective remote sensor. Always replace all batteries in a unit at the same time with new batteries of the same type. Do not mix old and new batteries or different battery types.

2. Valymas

Nuvalykite ekraną ir jutiklius minkšta,amp cloth. Do not use abrasive cleaners or solvents, as these may damage the plastic components or the LCD screen. Ensure no moisture enters the battery compartments or other openings.

3. Jutiklių priežiūra

For outdoor sensors, periodically check for debris or obstructions that might affect readings. Ensure the sensor is still protected from direct weather elements. If the sensor is exposed to extreme conditions, its lifespan may be reduced.

Trikčių šalinimas

Specifikacijos

Garantija ir palaikymas

For warranty information or technical support, please refer to the documentation included with your purchase or contact Geevon customer service directly. Keep your purchase receipt as proof of purchase for any warranty claims.