KERDE P30A Electric Bidet Toilet Seat User Manual

1. Svarbi saugos informacija

• Always ensure the product is connected to a domestic water supply.
• The power cord length is approximately 33 inches. Ensure a 120V, 1-hole socket is available within reach.
• Nemerkite gaminio į vandenį ar kitus skysčius.
• Unplug the bidet seat from the power outlet before cleaning or performing any maintenance.
• Šis prietaisas nėra skirtas naudoti asmenims (įskaitant vaikus), kurių fizinės, jutimo ar psichikos negalios arba neturintys patirties ir žinių, nebent už jų saugumą atsakingas asmuo juos prižiūrėtų arba instruktuotų, kaip naudoti prietaisą.

2. Produktas baigtasview

The KERDE P30A Electric Bidet Toilet Seat offers enhanced hygiene and comfort with features like a heated seat, warm water wash, self-cleaning nozzle, and dual control options. Familiarize yourself with the components below.

2.1 paveikslas: Baigėsiview of KERDE P30A Bidet Toilet Seat Components. This diagram labels key parts such as the silent pad, remote control, cover, instruction label, flushing nozzle opening, drying outlet, control panel, seat sensing point, and thermostatic seat.

3. Diegimo vadovas

This section provides instructions for installing your KERDE P30A Electric Bidet Toilet Seat. Please ensure all components are present before beginning installation.

3.1. Diegimo vaizdo įrašas

3.2. Žingsnis po žingsnio diegimas

1. Prepare Water Connection: Turn off the water supply to your toilet. Remove the existing water pipe connecting the toilet tank to the water supply valve.
2. Prijunkite T formos adapterį: Install the provided T-adapter to the toilet's water inlet. Connect the toilet's water pipe to one end of the T-adapter and the bidet's water hose to the other. Ensure all connections are secure and leak-free.
3. Insert Bidet Water Pipe: Insert the bidet's water pipe approximately 0.4 inches into the designated inlet on the bidet seat.
4. Place Rubber Stoppers: Insert the two rubber stoppers into the mounting holes on your toilet bowl.
5. Montavimo plokštės montavimas: Place the mounting plate over the rubber stoppers, aligning the holes.
6. Tvirta tvirtinimo plokštė: Insert the screws and washers through the mounting plate and into the rubber stoppers. Tighten them securely using a screwdriver.
7. Pritvirtinkite bidė sėdynę: Slide the bidet seat onto the installed mounting plate until it clicks into place.
8. Open Water Valve: Turn on the water supply valve to restore water flow to the toilet and bidet.
9. Prijunkite maitinimą: Plug the bidet seat into a 120V, 1-hole electrical socket.

3.3. Toilet Compatibility

Before installation, confirm your toilet dimensions to ensure proper fit. The KERDE P30A is designed for elongated toilets.

3.2 paveikslas: Toilet Size Confirmation. This image illustrates the required dimensions for the toilet bowl (17.7-19.3 inches length, 3.9-8.7 inches bolt hole spacing) and the bidet seat (19.7 inches length, 14.6 inches width) to ensure compatibility. An electrical outlet is required.

3.3 paveikslas: Suitable Drain Valves. This image displays examples of toilet drain valves that are compatible (checked) and incompatible (crossed out) with the bidet seat's installation requirements.

4. Naudojimo instrukcijos

Your KERDE P30A bidet seat offers a range of functions for personalized hygiene. It can be controlled via a side panel or a handheld remote.

4.1 paveikslas: Dual Control Options. The bidet seat features both an ergonomic side control panel and a wireless remote control for convenient operation.

4.1. Pagrindinės savybės ir funkcijos

• Seat Sensor & Auto-Flush: The built-in seat sensor detects user presence. Upon standing, it can trigger an automatic flush.
• Plovimas šiltu vandeniu: The spray provides 3-temperature warm water (low/medium/high).
• Savaime išsivalantis antgalis: The stainless steel nozzle performs a self-cleaning cycle before and after each use.
• Šildoma sėdynė: The seat offers multiple temperature levels (low/middle/high) for comfort.
• Džiovinimas šiltame ore: A warm air dryer provides a hands-free drying experience after cleansing, with adjustable temperature levels (low/middle/high).
• LED naktinis apšvietimas: A soft LED night light provides gentle illumination for safe and convenient nighttime use.
• Energijos taupymo režimas: This bidet seat incorporates energy-saving technology to minimize power consumption.
• Quiet-Close Lid: The lid is designed to close quietly, preventing slamming.

4.2. Wash Modes

4.2 paveikslas: Multiple Wash Modes. This image details the various wash functions including Rear Wash, Female Wash, Oscillate Wash (wand moves back and forth), and Adjustable Nozzle Position.

4.3 paveikslas: Detailed Cleaning Modes. This image provides a closer look at Female cleaning, Buttocks cleaning, Massage cleaning, and the Self-cleaning function of the nozzle.

• Galinis plovimas: For general posterior cleansing.
• Female Wash (Front): Švelnesnis, platesnis purškiklis moterų higienai.
• Child Wash: A gentle wash setting suitable for children.
• Oscillate Wash: The nozzle moves back and forth to provide a wider cleaning area.
• Massage Wash: Provides a pulsating water stream for a soothing effect.

4.3. Temperature and Pressure Adjustment

4.4 paveikslas: Heated Seat Settings. This image displays the adjustable temperature levels for the heated seat: Normal, Low, Mid, and High.

4.5 paveikslas: Warm Air Drying Settings. This image illustrates the adjustable temperature levels for the warm air dryer: Normal, Low, Mid, and High.

• Use the 'Water Temp', 'Seat Temp', and 'Wind Temp' buttons on the control panel or remote to adjust temperature levels (Low, Mid, High).
• Use the 'Pressure' buttons to increase or decrease water spray intensity.
• Use the 'Position' buttons (Front/Back) to adjust the nozzle's position for optimal cleaning.

4.4. Automatic Flushing

4.6 paveikslas: Automatic Flushing. This image shows the bidet seat initiating an automatic flush as a user stands up, highlighting the convenience of this feature.

The bidet seat is equipped with an automatic flushing mechanism that activates when the user stands up from the seat, ensuring hands-free operation.

5. Priežiūra

Proper maintenance ensures the longevity and hygienic operation of your bidet seat.

5.1. Purkštukų valymas

• Nerūdijančio plieno antgalis atlieka automatinį savaiminio valymo ciklą prieš ir po kiekvieno naudojimo.
• For additional cleaning, activate the 'Self-clean' function on the control panel or remote.

5.2. Bendras valymas

• Prieš valydami, atjunkite bidė sėdynę nuo elektros lizdo.
• Bidė sėdynės išorinius paviršius nuvalykite minkšta, sausu skudurėliu.amp šluoste ir švelniu, neabrazyviniu valikliu.
• Avoid using harsh chemicals, abrasive pads, or solvents, as these can damage the surface.
• Įsitikinkite, kad į elektros komponentus nepatenka vanduo.

6. Problemų sprendimas

If you encounter any issues with your KERDE P30A bidet seat, please refer to these basic troubleshooting steps.

• Nėra galios: Check if the power cord is securely plugged into a working 120V outlet. Ensure the circuit breaker has not tripped.
• Be vandens purškimo: Verify that the water supply valve to the toilet is fully open. Check for any kinks or blockages in the bidet's water hose.
• Silpnas vandens slėgis: Ensure the water supply valve is fully open. Adjust the water pressure setting using the control panel or remote.
• Temperatūros problemos: Confirm that the desired water, seat, or air dryer temperature settings are selected on the control panel or remote. Allow a few moments for heating elements to reach temperature.
• Nuotolinio valdymo pultas nereaguoja: Check the batteries in the remote control and replace if necessary. Ensure there are no obstructions between the remote and the bidet seat.

Jei problema išlieka ir atlikus šiuos veiksmus, susisiekite su klientų aptarnavimo tarnyba.

7. Specifikacijos

8. Garantija ir palaikymas

For warranty information and customer support, please refer to the details below.

• Grąžinimo politika: Šiam produktui galima grąžinti pinigus arba jį pakeisti per 30 dienų nuo įsigijimo datos, atsižvelgiant į mažmenininko grąžinimo politiką.
• Gamintojas: KERDE
• For specific warranty terms, technical assistance, or to report an issue, please contact KERDE customer support directly. Contact information can typically be found on the product packaging or the official KERDE websvetainę.