1. Įvadas
This manual provides detailed instructions for the installation, operation, and maintenance of your Thermalright TL-C14C-S 140mm ARGB PWM Case Fan. This high-performance cooling fan is designed to enhance airflow and thermal management within your computer system, featuring an S-FDB bearing for quiet operation and addressable RGB lighting for aesthetic customization. Please read this manual thoroughly before installation and use.
2. Produkto ypatybės
- Didelio našumo aušinimas: 140mm fan with a maximum speed of 1500 RPM, delivering up to 75.8 CFM airflow and 1.93 mm H2O static pressure for effective heat dissipation.
- Tylus veikimas: Equipped with an S-FDB (Fluid Dynamic Bearing) for reduced friction and noise, maintaining a low noise level of 26.4 dBA.
- PWM valdymas: 4-pin PWM connector allows for precise fan speed control via the motherboard, optimizing performance and noise levels.
- Adresuojamas RGB (ARGB) apšvietimas: Integrated high-brightness LED atomizing fan blades provide soft, customizable ARGB lighting effects. Supports synchronization with compatible motherboard ARGB headers (3-pin +5V ARGB).
- Patvari konstrukcija: Fan blades and frame are constructed from industrial-grade PBT and PC polymers for strength and stability.
- Vibracija Damping: Each corner of the fan features pre-installed soft silicone rubber pads to minimize noise and vibration.
3. Pakuotės turinys
Į paketą įeina šie elementai:
- Thermalright TL-C14C-S 140mm ARGB PWM Case Fan (1 unit)
- Mounting Screws (quantity may vary)
4. Diegimo vadovas
Follow these steps to properly install your Thermalright TL-C14C-S case fan. Ensure your computer is powered off and unplugged before beginning installation.
4.1 Fizinis įrengimas
- Identify the desired mounting location within your PC case (e.g., front, rear, top, bottom, or on a CPU cooler/radiator).
- Align the fan with the screw holes on your case or radiator. The fan can be mounted to push or pull air, depending on your system's airflow requirements.
- Secure the fan using the provided mounting screws. Do not overtighten. The integrated silicone pads will help absorb vibrations.

Image: The Thermalright TL-C14C-S fan can be used for case airflow or mounted on water cooling radiators.
4.2 Elektros jungtys
- PWM jungtis: Connect the fan's 4-pin PWM cable to an available 4-pin fan header on your motherboard. This allows the motherboard to control the fan speed based on system temperature.
- ARGB jungtis: Connect the fan's 3-pin +5V ARGB cable to an available 3-pin +5V ARGB header on your motherboard. Ensure the connector is aligned correctly to avoid damage. Do not connect to a 4-pin +12V RGB header, as this will damage the fan's LEDs.
- If you are connecting multiple ARGB fans, you may need an ARGB splitter or controller (not included) to synchronize lighting effects.

Image: The fan features a PWM connector for speed control.
Video: This video demonstrates the connection process for ARGB lighting and fan power to a motherboard. It shows how to connect ARGB headers and align pins for proper synchronization.
5. Naudojimo instrukcijos
Once installed and connected, the Thermalright TL-C14C-S fan operates automatically based on your motherboard's settings.
- Ventiliatoriaus greičio valdymas (PWM): The 4-pin PWM connection allows your motherboard's BIOS/UEFI or dedicated software to dynamically adjust the fan speed. You can configure fan curves to balance cooling performance and noise levels according to your preferences.
- ARGB apšvietimo valdymas: The ARGB lighting can be controlled and synchronized using your motherboard's RGB software (e.g., ASUS Aura Sync, MSI Mystic Light Sync, GIGABYTE RGB Fusion, ASRock Polychrome Sync). Refer to your motherboard's manual for specific instructions on ARGB software usage. The fan supports up to 17 modes of light effects.

Image: The TL-C14C-S fan displays vibrant ARGB lighting effects.
6. Priežiūra
The Thermalright TL-C14C-S fan is designed for long-term, maintenance-free operation thanks to its S-FDB bearing.
- Valymas: Periodically clean the fan blades and frame to remove dust buildup, which can impede airflow and reduce cooling efficiency. Use compressed air or a soft brush. Ensure the fan is powered off before cleaning.
- Guolis: The S-FDB bearing is designed to be maintenance-free. Do not attempt to disassemble the fan or lubricate the bearing, as this may void your warranty and damage the product.

Image: Illustration of the long-lasting S-FDB (Fluid Dynamic Bearing) designed for low-friction and low-noise operation.
7. Problemų sprendimas
Jei kyla problemų dėl ventiliatoriaus, vadovaukitės šiais įprastais trikčių šalinimo veiksmais:
- Ventiliatorius nesisuka:
- Įsitikinkite, kad 4 kontaktų PWM jungtis yra tvirtai prijungta prie pagrindinės plokštės ventiliatoriaus lizdo.
- Check your motherboard's BIOS/UEFI settings to ensure the fan header is enabled and configured correctly.
- Verify that your power supply is functioning correctly and providing power to the motherboard.
- ARGB lemputės neveikia:
- Confirm the 3-pin +5V ARGB connector is securely plugged into the correct motherboard ARGB header.
- Double-check that it is a +5V ARGB header and NOT a +12V RGB header. Connecting to a +12V header will damage the LEDs.
- Ensure your motherboard's ARGB software is installed and configured to control the lighting effects.
- If using an ARGB controller, ensure it is powered and functioning correctly.
- Per didelis triukšmas:
- Patikrinkite, ar ventiliatoriaus mentes neliečia jokių laidų ar kliūčių.
- Ensure the fan is securely mounted and the mounting screws are not loose.
- Nuvalykite visas dulkių sankaupas ant ventiliatoriaus menčių.
- Adjust fan speed settings in your motherboard's BIOS/UEFI or software to a lower RPM if noise is a concern.
8. Specifikacijos
| Funkcija | Specifikacija |
|---|---|
| Modelis | TL-C14C-S |
| Matmenys | 140mm x 140mm x 25mm (I x P x A) |
| Ventiliatoriaus greitis | 1500 aps./min. (maks.) |
| Triukšmo lygis | 26.4 dBA (maks.) |
| Oro srautas | 75.8 CFM (maks.) |
| Statinis slėgis | 1.93 mm H2O (maks.) |
| Guolio tipas | S-FDB (sklaidinis dinaminis guolis) |
| Jungtis | 4-Pin PWM (Fan Power), 3-Pin +5V ARGB (Lighting) |
| Veiklos ttage | 12 V (ventiliatorius), 5 V (ARGB) |
| Dabartinė | 0.13A |
| Vattage | 1.56 vatų |
| Medžiaga | PBT & PC Polymer (Fan Blades & Frame), Silicone (Anti-vibration pads) |
9. Garantija ir palaikymas
Thermalright products are manufactured with high-quality standards. For warranty information or technical support, please refer to the official Thermalright websvetainėje arba susisiekite su vietiniu platintoju. Išsaugokite pirkimo įrodymą, jei prireiktų pateikti garantinį prašymą.
For further assistance, you may visit the Thermalright store on Amazon: Thermalright Store.
