1. Produktas baigtasview
The Thermalright Phantom Spirit 120 EVO is a high-performance CPU air cooler designed to efficiently dissipate heat from your processor. It features a dual-tower heatsink design, seven advanced heat pipes, and two TL-K12 PWM fans for optimal cooling and quiet operation. This cooler is compatible with a wide range of Intel and AMD sockets.

1.1 vaizdas: Baigtaview of the Thermalright Phantom Spirit 120 EVO CPU Cooler, showcasing its dual-tower design and fans.
Pagrindinės funkcijos:
- Dual-Tower Heatsink: Provides a large surface area for heat dissipation.
- 7x6mm AGHP Heat Pipes: Advanced Gravity Heat Pipe technology ensures efficient heat transfer regardless of orientation.
- Dual TL-K12 PWM Fans: 120mm fans with a maximum speed of 2150 RPM and low noise levels (≤27dB(A)).
- Anodic Black Matte Finish: Enhances aesthetics and corrosion resistance.
- Platus suderinamumas: Supports Intel LGA1700/115x/1200/2011/2066 and AMD AM4/AM5 sockets.
2. Pakuotės turinys
Please verify that all components are present before proceeding with the installation.
- Thermalright Phantom Spirit 120 EVO CPU Cooler (Heatsink with pre-installed fans)
- Intel Mounting Brackets and Backplate
- AMD tvirtinimo laikikliai
- Tvirtinimo varžtai ir tarpikliai
- Terminė pasta
- Fan Clips (if not pre-installed)
- Vartotojo vadovas
3. Diegimo vadovas
Before starting, ensure your system is powered off and unplugged. Refer to your motherboard manual for CPU and RAM installation if not already done.
3.1 Paruoškite pagrindinę plokštę
- Remove any existing CPU cooler and clean off old thermal paste from the CPU IHS (Integrated Heat Spreader) using isopropyl alcohol.
- Nustatykite savo procesoriaus lizdo tipą („Intel LGA“ arba „AMD AM“).
3.2 Įdiekite tvirtinimo įrangą
For Intel Sockets (LGA1700/115x/1200/2011/2066):
- Place the Intel backplate behind the motherboard, aligning the holes with the CPU socket mounting holes.
- Insert the appropriate standoffs through the motherboard from the front, screwing them into the backplate.
- Attach the Intel mounting brackets to the standoffs using the provided screws.
AMD lizdams (AM4/AM5):
- Remove the plastic retention clips from the stock AMD backplate (keep the backplate).
- Install the AMD standoffs onto the stock backplate.
- Attach the AMD mounting brackets to the standoffs using the provided screws.

Image 3.1: Diagram showing compatible motherboard sockets for Intel (LGA115X/1200/1700/2011/2066) and AMD (AM4/AM5).
3.3 Užtepkite terminę pastą
Apply a small, pea-sized amount of thermal paste to the center of the CPU IHS. Do not spread it; the pressure from the cooler will distribute it evenly.
3.4 Mount the Heatsink
- Carefully place the heatsink onto the CPU, aligning the mounting holes on the cooler base with the mounting brackets.
- Secure the heatsink by tightening the spring-loaded screws in a diagonal pattern until snug. Do not overtighten.
3.5 Install Fans and Connect Cables
- Attach the two TL-K12 fans to the heatsink using the provided fan clips. Ensure the airflow direction is correct (typically blowing towards the rear of the case).
- Connect the 4-pin PWM fan cables to the CPU_FAN and CPU_OPT (or CHA_FAN) headers on your motherboard. The Y-splitter cable can be used if only one CPU fan header is available.

Image 3.2: Illustration of the dual-tower heatsink and dual fans, demonstrating how they contribute to efficient CPU cooling.
4. Naudojimo instrukcijos
Once installed, the Thermalright Phantom Spirit 120 EVO operates automatically, controlled by your motherboard's PWM fan headers.
4.1 Ventiliatoriaus greičio valdymas (PWM)
The TL-K12 fans utilize Pulse Width Modulation (PWM) technology, allowing your motherboard to dynamically adjust fan speeds based on CPU temperature. This ensures optimal cooling performance while minimizing noise during lighter loads.
- You can configure fan curves in your motherboard's BIOS/UEFI settings or through compatible software provided by your motherboard manufacturer.
- The fans operate at a maximum speed of 2150 RPM ±10% and produce a maximum noise level of ≤27dB(A).

4.1 paveikslėlis: Stambus planas view of the TL-K12 120mm high-performance fan, highlighting its design and RGB lighting.
4.2 Initial System Check
After installation, power on your system and enter the BIOS/UEFI to verify that the CPU temperature is within normal operating limits and that the fans are spinning correctly.
5. Priežiūra
Reguliarus techninis aptarnavimas padeda užtikrinti procesoriaus aušintuvo ilgaamžiškumą ir optimalų veikimą.
5.1 Cleaning the Heatsink and Fans
Dust accumulation can impede cooling performance. It is recommended to clean the cooler every 6-12 months, or more frequently in dusty environments.
- Išjunkite kompiuterį ir atjunkite jį nuo sieninio lizdo.
- Carefully remove the fans from the heatsink by detaching the fan clips.
- Use compressed air to blow dust out of the heatsink fins. Hold the can upright and use short bursts.
- Clean the fan blades with a soft cloth or compressed air. Hold the fan blades to prevent them from spinning rapidly during cleaning, which can damage the bearings.
- Reattach the fans to the heatsink.
5.2 Thermal Paste Reapplication
While not frequently required, reapplying thermal paste every few years can help maintain optimal thermal conductivity. If you notice significantly higher CPU temperatures, consider reapplying thermal paste.
6. Problemų sprendimas
If you encounter issues with your CPU cooler, refer to the following common problems and solutions.
| Problema | Galima priežastis | Sprendimas |
|---|---|---|
| Aukšta procesoriaus temperatūra |
|
|
| Ventiliatoriai nesisuka |
|
|
| Per didelis ventiliatoriaus triukšmas |
|
|
7. Specifikacijos
Detailed technical specifications for the Thermalright Phantom Spirit 120 EVO CPU Cooler.

Image 7.1: Dimensional drawing of the Phantom Spirit 120 EVO, showing its height (157mm), width (135mm), and length (125mm).
| Funkcija | Specifikacija |
|---|---|
| Modelio numeris | PS120 EVO (TL-PS120 EVO) |
| Matmenys (I x P x A) | 12.5 cm x 13.5 cm x 15.7 cm |
| Aušinimo būdas | Oro aušinimas |
| Šilumos vamzdžiai | 7 x 6mm AGHP Heat Pipes (Nickel-plated copper) |
| Bazinė medžiaga | Precisely Micro-Engraved Reflow Soldered Copper Base |
| Ventiliatoriaus modelis | TL-K12 PWM Fan |
| Ventiliatoriaus matmenys | 120 mm x 120 mm x 25 mm |
| Ventiliatoriaus greitis | 2150 aps./min. ±10 % (maks.) |
| Oro srautas | 69 CFM (maks.) |
| Triukšmo lygis | ≤27 dB(A) |
| Maitinimo jungtis | 4-Pin PWM |
| ttage | 12 V |
| Suderinami lizdai | Intel: LGA1700 / 1150 / 1151 / 1155 / 1156 / 1200 / 2011 / 2066 AMD: AM4 / AM5 |
| Medžiaga | Copper (Heat Pipes, Base), Aluminum (Fins), PBT + PC (Fans) |
8. Informacija apie garantiją
Thermalright products are manufactured to the highest quality standards. This product is covered by a limited warranty against defects in materials and workmanship from the date of purchase.
Please retain your proof of purchase for warranty claims. The warranty does not cover damage resulting from improper installation, accident, abuse, misuse, natural disaster, or unauthorized modification.
For specific warranty duration and terms, please refer to the official Thermalright websvetainėje arba susisiekite su vietiniu platintoju.
9. Parama
If you require technical assistance or have questions regarding the Thermalright Phantom Spirit 120 EVO CPU Cooler, please contact Thermalright customer support.
- Websvetainė: Apsilankykite oficialioje „Thermalright“ svetainėje webDUK, atnaujintų vadovų ir pagalbos išteklių svetainė.
- El. paštas: Refer to the Thermalright webklientų aptarnavimo el. pašto adresų svetainė.
- Vietinis platintojas: Contact your point of purchase or local Thermalright distributor for regional support.







