Protmex PT6708 Digital Sound Level Meter User Manual

1. Įvadas

This user manual provides detailed instructions for the operation and maintenance of the Protmex PT6708 Digital Sound Level Meter. This device is designed for accurate measurement of sound levels in various environments, offering a range of 30 to 130 decibels with high precision. Please read this manual thoroughly before using the device to ensure proper function and safety.

Image: The Protmex PT6708 Digital Sound Level Meter, shown with its protective foam cover over the microphone and two AAA batteries.

2. Produktas baigtasview

The PT6708 Sound Level Meter is a compact and reliable instrument for noise measurement.

2.1 Komponentai ir ekranas

Image: A detailed diagram illustrating the various components of the PT6708 Sound Level Meter, including the sponge cover, LCD, ON-OFF button, data hold button, backlight button, up/down buttons, fast/slow speed button, max button, A/C mode switch, sensor, and battery compartment.

• Sponge Cover: Protects the microphone from wind noise and dust.
• Jutiklis: High-precision noise sensor for accurate sound detection.
• LCD ekranas: Large screen showing decibel readings, measurement modes, and battery status.
• ĮJUNGIMO-IŠJUNGIMO mygtukas: Įjungia arba išjungia įrenginį.
• Data Hold Button (H): Įšaldo dabartinį matavimą ekrane.
• Foninio apšvietimo mygtukas: Activates or deactivates the display backlight for visibility in low light.
• Aukštyn/žemyn mygtukai: Used for adjusting settings or navigating menus (if applicable).
• Fast/Slow Speed Button: Toggles between fast and slow response times.
• MAX mygtukas: Displays the maximum sound level recorded during a measurement session.
• A/C Mode Switch: Selects between A-weighting and C-weighting modes.
• Loudness Unit (dB/SONE): Button to switch between decibel and SONE units.
• Baterijų skyrius: Located at the rear, holds the AAA batteries.

3. Pagrindinės savybės

• Accurate and Sensitive Measurement: Utilizes a high-quality AD636 chip and an electric condenser microphone for precise sound level monitoring from 30 to 130 dB with an accuracy of +/-1.5 dB and 0.1 dB resolution.
• Fast and Slow Response Rates:
  • Fast Response (0.125s): Ideal for general environmental measurements and quickly changing noise levels.
  • Slow Response (1s): Suitable for environmental measurements with relatively stable noise levels or for averaging fluctuating sounds.
• A/C Weighting Network Selection:
  • A svertinis koeficientas: Simulates human hearing characteristics, suitable for ambient noise detection.
  • C svertinis koeficientas: Measures the actual sound level, suitable for sound pressure analysis of machine motors and mechanical noise.
• Data Hold and MAX Functions: Allows freezing the current reading and displaying the maximum recorded value.
• LCD ekranas su apšvietimu: Ensures clear visibility of readings in various lighting conditions, with an auto power-off function for energy saving.
• Neslystantis dizainas: Composite material injection molding process with an anti-drop structure for durability and ease of handling.

Image: Visual representation of the meter's high-precision noise sensor, the clarity of its backlit LCD display, and the ergonomic anti-slip design of its casing.

Image: A composite image detailing the internal premium chip, the polarized capacitive microphone for excellent performance, the dynamic characteristics of sound pressure (Fast/Slow response times), and the A and C weighting mode selection for different types of noise measurement.

4. Sąranka

4.1 Išpakavimo turinys

Atidarius pakuotę, patikrinkite, ar yra visi komponentai:

Image: The complete package contents, including the product box, carrying case, the PT6708 sound level meter, user manual, and AAA batteries.

• Protmex PT6708 Sound Level Meter
• Nešiojimo maišelis
• Vartotojo vadovas
• AAA baterijos (4 pridedamos)

4.2 Akumuliatoriaus įdėjimas

1. Suraskite akumuliatoriaus skyrių įrenginio gale.
2. Mažu „Phillips“ atsuktuvu atlaisvinkite varžtą, tvirtinantį akumuliatoriaus dangtelį.
3. Nuimkite akumuliatoriaus dangtelį.
4. Insert four (4) AAA batteries, ensuring correct polarity (+/-).
5. Uždėkite akumuliatoriaus dangtelį ir priveržkite varžtą.

Pastaba: The device requires 4 AAA batteries. Ensure they are inserted correctly for proper operation.

5. Naudojimo instrukcijos

5.1 Maitinimo įjungimas/išjungimas

Paspauskite ĮJUNGTI IŠJUNGTI button (green power symbol) to turn the meter on. Press it again to turn the meter off.

5.2 Pagrindinis matavimas

Once powered on, the meter will immediately begin displaying the current sound level in decibels (dB). Ensure the microphone is pointed towards the sound source.

Image: A visual chart illustrating different sound level ranges in decibels (dB) and their corresponding descriptions, from silence (1-15dB) to hearing impairment (above 100dB).

5.3 A/C Weighting Selection

Paspauskite A/C button to toggle between A-weighting and C-weighting modes. The selected mode will be indicated on the LCD.

• A-Weighting Mode: Simulates the human ear's response to sound. Use this for general environmental noise measurements, such as in offices, residential areas, or for assessing noise exposure.
  

  Image: A diagram illustrating A-weighting mode, which simulates the auditory characteristics of the human ear for environmental noise measurement.

• C-Weighting Mode: Provides a flatter frequency response, measuring the actual sound level without mimicking human hearing. Use this for analyzing mechanical noise, motor sounds, or when assessing peak sound pressure levels.
  

  Image: A diagram illustrating C-weighting mode, which measures the actual sound level, suitable for mechanical noise analysis.

5.4 Fast/Slow Response Time

Paspauskite GREITAS LĖTAS button to switch between fast and slow response times.

• GREITAI: Responds quickly to changes in sound level (0.125 seconds). Useful for capturing transient noises or rapidly fluctuating sounds.
• LĖTAS: Provides a more stable reading by averaging the sound level over a longer period (1 second). Ideal for measuring average noise levels or sounds that are relatively constant.

5.5 Data Hold (H)

Paspauskite H mygtuką, kad sustabdytumėte dabartinį rodmenį ekrane. Paspauskite jį dar kartą, kad atleistumėte fiksavimą ir tęstumėte tiesioginį matavimą.

5.6 Maximum (MAX) Measurement

Paspauskite MAX button to display the maximum sound level recorded since the meter was powered on or since the MAX function was last reset. Press it again to exit MAX mode.

5.7 Apšvietimas

Paspauskite Foninis apšvietimas button (sun symbol) to turn the LCD backlight on or off. The backlight will automatically turn off after a period of inactivity to conserve battery power.

5.8 Unit Selection (dB/SONE)

Paspauskite dB/SONE button to switch the display unit between decibels (dB) and SONE.

Image: A visual representation of the various function buttons on the meter, including A/C mode, Data Hold, Max/Min, Unit Change (dB/SONE), Fast/Slow, and Manual/Auto.

6. Paraiškos

The Protmex PT6708 Sound Level Meter is suitable for a wide range of applications, including:

• Environmental noise assessment in residential areas, offices, and schools.
• Industrial noise measurement in factories and workshops.
• Traffic noise monitoring.
• Quality control in product manufacturing.
• Health and safety compliance.
• Audio equipment testing and calibration.

Image: The digital sound level meter depicted in various common environments where noise measurement is relevant, such as offices, factories, near road traffic, and in a bedroom.

Image: A child covering their ears, symbolizing the impact of loud noise and the need for sound level measurement.

Image: The sound level meter positioned in a concert setting, demonstrating its use for measuring crowd noise levels.

Image: A worker wearing ear protection in an industrial environment, with the sound level meter nearby, highlighting its application in occupational safety.

7. Priežiūra

• Valymas: Prietaisą valykite minkštu, sausu skudurėliu. Nenaudokite abrazyvinių valiklių ar tirpiklių.
• Saugykla: Store the meter in its protective pouch in a cool, dry place away from direct sunlight and extreme temperatures.
• Baterijos keitimas: Replace batteries when the low battery indicator appears on the display. Remove batteries if the device will not be used for an extended period to prevent leakage.
• Mikrofono priežiūra: Keep the microphone clean and free from dust or debris. Always use the sponge cover to protect the microphone.

8. Problemų sprendimas

9. Specifikacijos

Image: A diagram showing the physical dimensions of the PT6708 Sound Level Meter: 7.59 inches in length, 2.36 inches in width, and 1.14 inches in depth.

10. Garantija ir palaikymas

Protmex is committed to providing quality products and customer satisfaction.

10.1 Informacija apie garantiją

The PT6708 sound meter complies with IEC651 Type 2 and SI.4 Type2 standards, and is CE and RoHS approved. For specific warranty details, please refer to the documentation included with your purchase or contact Protmex customer support.

10.2 Pagalba klientams

Protmex offers 24/7 online friendly support. For any inquiries, technical assistance, or support needs, please visit the official Protmex websvetainėje arba susisiekite su klientų aptarnavimo komanda.

Daugiau informacijos ir kontaktinius duomenis galite rasti adresu Protmex Store on Amazon.

Norėdami gauti skaitmeninę naudotojo vadovo kopiją, taip pat galite žr. Vartotojo vadovas (PDF).