CREWORKS 2L Digital Ultrasonic Cleaner User Manual

1. Įvadas

Thank you for choosing the CREWORKS 2L Digital Ultrasonic Cleaner. This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your device. Please read it thoroughly before first use and keep it for future reference.

2. Saugos instrukcijos

Kad išvengtumėte sužalojimų ar įrenginio pažeidimo, visada laikykitės šių saugos priemonių:

• Neardykite įrenginio.
• Nenaudokite be priežiūros.
• Always use sufficient fluid in the tank.
• Unplug before filling or draining.
• Nenaudokite įrenginio be skysčio bake.
• Laikyti vaikams nepasiekiamoje vietoje.
• Nemerkite pagrindinio įrenginio į vandenį ar kitus skysčius.
• Use only appropriate cleaning solutions. Avoid flammable or corrosive liquids.
• Įsitikinkite, kad maitinimo laidas nėra pažeistas ir tinkamai prijungtas prie įžeminto lizdo.

Figure 2.1: The CREWORKS 2L Digital Ultrasonic Cleaner with its warning label, emphasizing safety precautions.

3. Produktas baigtasview ir Savybės

The CREWORKS 2L Digital Ultrasonic Cleaner is designed for efficient and thorough cleaning of various items using ultrasonic technology. It features a durable stainless steel tank, digital controls, and multiple cleaning modes.

3.1 Pagrindinės savybės

• 2L talpa: Suitable for a wide range of items.
• 60W Ultrasonic Power: Provides effective cavitation for deep cleaning.
• 100W Heating Function: Allows for temperature adjustment (20-80℃) to enhance cleaning.
• Skaitmeniniai valdikliai: Intuitive panel for setting time (0-99 min) and temperature.
• Degassing Mode: Eliminates gas bubbles for improved cavitation efficiency.
• 7 Levels of Oscillation: Adjustable intensity for delicate to robust cleaning.
• Tylus veikimas: Thick tank design reduces noise to below 60 dB.
• 3 valymo režimai: Quick, Standard, and Deep for varied cleaning needs.
• 304 Stainless Steel Tank: Užtikrina ilgaamžiškumą ir saugų laikymą maiste.
• Transparent Acrylic Lid: Allows real-time observation of the cleaning process.

Figure 3.1: Close-up of the digital control panel, highlighting the time and temperature displays, and control buttons.

Figure 3.2: Illustration of the ultrasonic cleaning principle, showing the formation, expansion, and bursting of microscopic bubbles for effective cleaning.

4. Sąranka

Follow these steps to set up your ultrasonic cleaner:

1. Išpakavimas: Atsargiai išimkite įrenginį iš pakuotės. Patikrinkite, ar nėra pažeidimų.
2. Vieta: Place the cleaner on a stable, flat, and dry surface, away from heat sources and direct sunlight. Ensure adequate ventilation.
3. Maitinimo jungtis: Connect the power cord to the unit and then to a grounded electrical outlet. Ensure the power switch is in the OFF position before plugging in.
4. Bako užpildymas: Open the lid and fill the stainless steel tank with the appropriate cleaning solution. Ensure the liquid level is between the MIN and MAX marks. Do not overfill or underfill.
5. Įdėti krepšelį: If using, place the cleaning basket into the tank.

Figure 4.1: The ultrasonic cleaner with its lid open, showing the stainless steel tank and the included cleaning basket.

5. Naudojimo instrukcijos

Operating your CREWORKS ultrasonic cleaner is straightforward:

5.1 Pagrindinės operacijos

1. Maitinimas: Turn on the main power switch located at the back or side of the unit. The digital display will illuminate.
2. Vietos elementai: Carefully place the items to be cleaned into the cleaning basket, ensuring they are fully submerged in the solution but not touching each other or the tank bottom directly.
3. Nustatyta temperatūra (neprivaloma): Press the "T/°C" button to adjust the desired cleaning temperature (20-80℃) using the up/down arrows. Heating will begin automatically.
4. Nustatyti laiką: Use the "TIME" up/down arrows to set the cleaning duration (0-99 minutes).
5. Pasirinkite režimą (neprivaloma): Choose from "QUICK" (5 min), "STD" (15 min), or "EXT" (30 min) preset modes if desired.
6. Pradėkite valymą: Press the "START" button to begin the ultrasonic cleaning cycle. The display will show the remaining time.
7. Ciklo pabaiga: Įrenginys automatiškai išsijungs, kai laikmatis pasieks nulį.
8. Pašalinti elementus: Carefully remove the cleaning basket and rinse the cleaned items under clean water.
9. Išjungti: Turn off the main power switch and unplug the unit when not in use.

5.2 Degassing Mode

The Degassing mode removes air bubbles from the cleaning solution, which can interfere with ultrasonic cavitation, making the cleaning process more efficient, especially with new solutions. Press the "DEGAS" button to activate this mode. It is recommended to run degassing for a few minutes before starting a cleaning cycle with fresh solution.

Figure 5.1: Visual representation of the degassing process, where air bubbles are removed from the cleaning solution to optimize ultrasonic performance.

5.3 Adjustable Oscillation

The unit offers 7 levels of oscillation intensity. This allows you to select a gentler cleaning for delicate items or a more powerful one for heavily soiled objects. Adjust the oscillation intensity using the dedicated knob or buttons on the control panel, if available, or by selecting the appropriate cleaning mode.

Figure 5.2: Illustration demonstrating the 7-level oscillation adjustment, allowing users to customize cleaning intensity for various items, from delicate jewelry to robust tools.

6. Priežiūra ir priežiūra

Tinkama priežiūra užtikrina ultragarsinio valytuvo ilgaamžiškumą ir optimalų veikimą.

• Bako ištuštinimas: After each use, especially if the solution is dirty, unplug the unit and carefully drain the liquid from the tank.
• Bako valymas: Wipe the inside of the tank with a soft cloth. For stubborn residues, use a mild detergent and rinse thoroughly. Do not use abrasive cleaners.
• Išorinis valymas: Nuvalykite įrenginio išorę skelbimuamp audinys. Nenaudokite stiprių cheminių medžiagų.
• Saugykla: Nenaudojamą prietaisą laikykite vėsioje, sausoje vietoje. Įsitikinkite, kad bakas tuščias ir sausas.
• Reguliarus patikrinimas: Periodiškai tikrinkite maitinimo laidą ir kištuką, ar nėra kokių nors pažeidimų.

Figure 6.1: Demonstrates the visible cleaning effect of the ultrasonic cleaner on items like glasses, razor blades, and circuit boards, showing their improved cleanliness after use.

7. Problemų sprendimas

If you encounter issues with your ultrasonic cleaner, refer to the following table:

8. Specifikacijos

Detailed technical specifications for the CREWORKS 2L Digital Ultrasonic Cleaner:

Figure 8.1: Dimensional diagram of the ultrasonic cleaner and its cleaning basket, providing precise measurements for planning and usage.

9. Informacija apie garantiją

This product comes with a standard manufacturer's warranty. For details regarding warranty coverage, duration, and claims, please refer to the warranty card included with your purchase or contact CREWORKS customer support directly. Keep your proof of purchase for warranty validation.

10. Pagalba klientams

For any questions, technical assistance, or service requests, please contact CREWORKS customer support. Contact information can typically be found on the product packaging, the official CREWORKS websvetainėje arba per pirkimo vietą.

Gamintojas: ĮRENGINIAI

ASIN: B0CTSVGC2Z