Hikvision DS-2CD1043G2-LIU 4MP PoE IP Bullet Security Camera User Manual

Įvadas

This manual provides comprehensive instructions for the installation, operation, and maintenance of your Hikvision DS-2CD1043G2-LIU 4MP PoE IP Bullet Security Camera. Please read this manual thoroughly before using the product to ensure proper and safe operation. Keep this manual for future reference.

Saugos informacija

Always follow basic safety precautions to reduce the risk of fire, electric shock, and injury to persons. This includes, but is not limited to:

• Ensure the power source meets the camera's requirements (12V DC or PoE).
• Nelaikykite fotoaparato ekstremalioje temperatūroje, drėgmėje ar korozinėje aplinkoje.
• Venkite tiesioginio objektyvo poveikio stipriems šviesos šaltiniams.
• Montavimą turėtų atlikti kvalifikuotas personalas.
• Disconnect power before any maintenance or installation procedures.

Pakuotės turinys

Patikrinkite, ar pakuotėje yra visi komponentai:

• Hikvision DS-2CD1043G2-LIU IP Bullet Camera
• Tvirtinimo varžtai ir sieniniai kaiščiai
• Vandeniui atspari tinklo kabelio jungtis
• Quick Start Guide (this document serves as a detailed manual)
• Gręžimo šablonas

Produktas baigtasview

The Hikvision DS-2CD1043G2-LIU is a 4MP PoE IP bullet camera designed for outdoor surveillance. It features a 2.8mm fixed lens, IP67 weather resistance, and Night Color technology for enhanced low-light performance.

1 pav.: šonas view of the Hikvision DS-2CD1043G2-LIU camera with mounting bracket.

2 pav.: priekis view of the camera lens and sensor area.

Pagrindiniai komponentai:

• Objektyvas: 2.8mm fixed lens for wide-angle viewing.
• IR/White Light LEDs: For night vision and supplemental lighting.
• Mikrofonas: Dėl garso įvesties.
• Network Interface (RJ45): Supports Power over Ethernet (PoE) and data transmission.
• Maitinimo įvestis: 12V DC power connector (if not using PoE).
• Montavimo laikiklis: Adjustable for various installation angles.

Sąranka

1. Fizinis įrengimas

1. Pasirinkite montavimo vietą: Pasirinkite tinkamą lauko vietą, kuri užtikrintų norimą viewing angle and is within reach of network cabling. Ensure the surface is strong enough to support the camera.
2. Gręžimo skylės: Use the provided drill template to mark and drill pilot holes for the mounting screws.
3. Apsaugokite fotoaparatą: Attach the camera's mounting bracket to the wall or ceiling using the supplied screws and wall plugs.
4. Sureguliuoti kampą: Loosen the adjustment screws on the bracket to set the desired camera angle, then tighten them securely.

2. Tinklo ir maitinimo prijungimas

The camera supports Power over Ethernet (PoE) for simplified installation, or a 12V DC power adapter (sold separately).

• PoE ryšys: Connect an Ethernet cable from a PoE-enabled switch or NVR directly to the camera's RJ45 port. Use the waterproof connector to protect the connection if installed outdoors.
• 12V DC Power (Alternative): If not using PoE, connect a 12V DC power adapter to the camera's power input port and an Ethernet cable to the RJ45 port for data.

3. Pradinė konfigūracija

1. Install SADP Tool: Download and install the Hikvision SADP (Search Active Devices Protocol) tool from the official Hikvision website on a computer connected to the same network as the camera.
2. Įjungti kamerą: Run the SADP tool. It will detect the camera. Select the camera and set a strong password to activate it.
3. Konfigūruoti tinklo nustatymus: Assign a static IP address or enable DHCP for the camera. Ensure the IP address is compatible with your network.
4. Prieiga per Web Naršyklė: Atidarykite a web browser (e.g., Internet Explorer, Chrome) and enter the camera's IP address. Log in with the activated password to access the camera's web sąsaja tolesniam konfigūravimui.

Veikiantis

Tiesiogiai View ir Įrašymas

• Web Sąsaja: After logging in, navigate to the "Live View" section to see the real-time video feed.
• NVR/DVR: If connected to a Hikvision NVR/DVR, the camera feed will be accessible through the recorder's interface.
• Įrašas: Configure recording schedules, motion-triggered recording, or continuous recording via the web interface or NVR/DVR settings.

Išplėstinės funkcijos

• Judesio aptikimas: Set up motion detection zones and sensitivity. Configure actions such as recording, sending notifications, or triggering alarms.
• Night Vision (Night Color): The camera automatically switches to Night Color mode in low-light conditions, providing enhanced color images.
• Garsas: Enable and configure audio input/output settings if supported and connected.
• Vaizdo nustatymai: Adjust brightness, contrast, saturation, and other image parameters to optimize video quality.

Priežiūra

• Valymas: Regularly clean the camera lens with a soft, dry cloth. Do not use harsh detergents or abrasive materials.
• Firmware atnaujinimai: Patikrinkite oficialią „Hikvision“ svetainę website periodically for firmware updates. Always follow the provided instructions carefully when updating firmware to avoid damaging the device.
• Kabelio apžiūra: Periodically inspect all cables and connections for wear, damage, or corrosion, especially for outdoor installations.

Trikčių šalinimas

Specifikacijos

Garantija

This Hikvision product comes with a 2 metų gamintojo garantija. Please retain your proof of purchase for warranty claims. The warranty covers defects in materials and workmanship under normal use. It does not cover damage caused by misuse, accidents, unauthorized modifications, or improper installation.

For detailed warranty terms and conditions, please refer to the official Hikvision warranty policy available on their websvetainėje arba susisiekite su klientų aptarnavimo tarnyba.

Palaikymas

For technical assistance, product inquiries, or further support, please visit the official Hikvision website or contact their customer service department. You can typically find support resources, FAQs, and contact information on their global or regional websvetaines.

„Hikvision“ oficialus asmuo Websvetainė: www.hikvision.com