LASWIM WL-KP 1106

LASWIM WL-KP 1106 Pool Filter Pump Instruction Manual

Model: WL-KP 1106 | Brand: LASWIM

1. Įvadas

This manual provides essential information for the safe installation, operation, and maintenance of your LASWIM WL-KP 1106 Pool Filter Pump. This pump is designed to circulate water and remove impurities, ensuring optimal water quality for your swimming pool. It features a 1.5 HP single-phase motor and thermal protection for reliable performance.

Prieš įdiegdami ir naudodami, atidžiai perskaitykite šį vadovą ir išsaugokite jį ateičiai.

2. Saugos instrukcijos

ĮSPĖJIMAS: Jei nesilaikysite šių nurodymų, galite rimtai susižaloti arba mirti.

  • Prieš atlikdami bet kokius techninės priežiūros ar aptarnavimo darbus, visada atjunkite siurblio maitinimą.
  • This pump must be installed by a qualified electrician and in accordance with all local and national electrical codes.
  • Ensure the pump is installed on a solid, level surface, protected from excessive moisture and direct sunlight.
  • Nenaudokite siurblio, jei pažeistas maitinimo laidas arba kištukas.
  • Niekada neleiskite siurbliui veikti be vandens. Prieš paleisdami įsitikinkite, kad siurblys yra visiškai pripildytas vandens.
  • Keep children and pets away from the pump and pool equipment area.
  • Do not use this pump for anything other than its intended purpose (swimming pool filtration).

3. Pakuotės turinys

Išpakuodami patikrinkite, ar yra visi komponentai ir ar jie nepažeisti:

  • LASWIM WL-KP 1106 Pool Filter Pump
  • Fittings for installation
  • Instrukcijų vadovas

4. Produktas baigtasview

The LASWIM WL-KP 1106 is a robust pool pump designed for efficient water circulation and filtration. Below are images illustrating the pump's design and key components.

LASWIM WL-KP 1106 Pool Filter Pump, top-down view showing the motor, pre-filter basket, and inlet/outlet ports.

1 pav.: Iš ​​viršaus į apačią view of the LASWIM WL-KP 1106 Pool Filter Pump, highlighting the motor housing, transparent pre-filter lid, and plumbing connections.

LASWIM WL-KP 1106 Pool Filter Pump, angled view showing the electrical connection box and pump body.

2 pav.: Kampinis view of the LASWIM WL-KP 1106 Pool Filter Pump, showing the electrical connection box, pump body, and the pre-filter assembly.

5. Specifikacijos

Funkcija Specifikacija
Modelio numeris WL-KP 1106
Gamintojas LASWIM
Galia 1100 vatų (1.5 AG)
Maitinimo šaltinis Elektros kabelis
Medžiaga Nerūdijantis plienas, plastikas
Spalva Juoda
Gaminio matmenys (I x P x A) 58 x 23.5 x 27 cm
Prekės svoris 11.63 kilogramo
Šiluminė apsauga Taip

6. Sąranka ir diegimas

Proper installation is crucial for the pump's performance and longevity. If you are unsure about any step, consult a qualified professional.

  1. Vieta: Position the pump on a firm, level surface as close to the pool as possible to minimize friction loss in plumbing. Ensure it is protected from rain and direct sunlight.
  2. Santechnikos jungtys: Connect the pump's inlet to the pool skimmer/main drain line and the outlet to the filter system. Use appropriate fittings and sealants to ensure watertight connections.
  3. Elektros jungtis: Connect the pump to a properly grounded electrical outlet protected by a Ground Fault Circuit Interrupter (GFCI). Ensure the voltage atitinka siurblio reikalavimus.
  4. Siurblio užpildymas: Before starting, ensure the pump is filled with water. Open the pre-filter lid, fill the basket area with water, and then securely close the lid. This helps prevent the pump from running dry.
  5. Patikrinkite, ar nėra nuotėkių: After initial setup, turn on the pump briefly and check all connections for leaks. Tighten any loose fittings.

7. Naudojimo instrukcijos

Once installed and primed, operating the pump is straightforward:

  • Siurblio paleidimas: Ensure all valves are open to allow water flow. Plug the pump into the GFCI-protected outlet. The pump should start circulating water.
  • Stebėjimas: Observe the pressure gauge on your filter (if applicable) to ensure it's within the normal operating range. Check for consistent water flow.
  • Veikimo laikas: The duration your pump needs to run depends on pool size, bather load, and environmental factors. Consult your pool professional for recommended daily run times.
  • Siurblio sustabdymas: Simply unplug the pump from the electrical outlet or turn off the dedicated circuit breaker.

8. Priežiūra

Regular maintenance ensures efficient operation and extends the life of your pump.

  • Priešfiltrio krepšelio valymas: Regularly check and clean the pre-filter basket. Turn off the pump, release pressure, open the lid, remove debris, and replace the basket. Ensure the lid is sealed properly.
  • Sparnuotės apžiūra: Periodically inspect the impeller for debris or blockages. This may require partial disassembly of the pump.
  • Sandarinimo patikrinimas: Check pump seals for any signs of wear or leaks. Replace worn seals promptly.
  • Žieminimas: In colder climates, drain the pump completely and store it in a dry, frost-free location during winter months to prevent damage from freezing water.
  • Bendras valymas: Keep the exterior of the pump clean and free from dirt and debris to ensure proper ventilation.

9. Problemų sprendimas

Dažniausiai pasitaikančias problemas ir galimus jų sprendimus rasite šiame skyriuje.

Problema Galima priežastis Sprendimas
Siurblys neįsijungia Nėra maitinimo; suveikė GFCI; variklio perkrova; užstrigęs sparnuotė Check power supply and GFCI. Allow motor to cool if overloaded. Inspect and clear impeller.
Mažas vandens srautas Clogged pre-filter basket; air leak in suction line; clogged impeller; low water level in pool Clean pre-filter basket. Check and seal suction line connections. Clear impeller. Add water to pool.
Siurblys triukšmingas Air leak in suction line; cavitation (pump running dry); worn bearings Check and seal suction line. Ensure pump is primed. If bearings are worn, professional service is required.
Vanduo bėga iš siurblio Loose fittings; worn shaft seal; cracked housing Tighten fittings. Replace shaft seal. If housing is cracked, pump replacement may be necessary.

Jei susiduriate su čia nepaminėtomis problemomis arba jei sprendimai problemos neišsprendžia, susisiekite su klientų aptarnavimo tarnyba.

10. Garantija ir palaikymas

This product comes with a standard manufacturer's warranty. Please refer to the warranty card included with your purchase for specific terms and conditions. For technical support, replacement parts, or warranty claims, please contact your retailer or the manufacturer directly.

Manufacturer: LASWIM

© 2026 LASWIM. All rights reserved. Information in this manual is subject to change without notice.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.