Dynatron C2

Dynatron C2 Intel 7529 2U Active CPU Cooler User Manual

Modelis: C2

Brand: Dynatron

1. Įvadas

This manual provides detailed instructions for the installation, operation, and maintenance of your Dynatron C2 Intel 7529 2U Active CPU Cooler. Designed for Intel CPUs with an LGA 7529 socket, this cooler ensures optimal thermal management for your system. Please read this manual thoroughly before installation and use.

Key features of the Dynatron C2 include its compact dimensions suitable for 2U rack-mounted servers, enhanced cooling performance with a PWM function fan, premium aluminum stacked-fin and heat pipe construction, convenient mounting system, and pre-applied thermal grease for efficient heat transfer.

2. Saugos informacija

  • Always disconnect power from your computer before installing or removing components.
  • Atsargiai elkitės su procesoriaus aušintuvu ir kitais komponentais, kad jų nepažeistumėte.
  • Užtikrinkite tinkamą įžeminimą, kad išvengtumėte elektrostatinės iškrovos (ESD).
  • Laikyti vaikams nepasiekiamoje vietoje.
  • Do not operate the cooler if the fan is damaged or obstructed.

3. Pakuotės turinys

Patikrinkite, ar pakuotėje yra visi reikalingi daiktai:

  • Dynatron C2 Intel 7529 2U Active CPU Cooler (1)
  • Mounting hardware (integrated or included as a separate frame)

4. Produktas baigtasview

The Dynatron C2 CPU cooler consists of a heatsink assembly with aluminum stacked-fins, copper heat pipes, a base plate, and an integrated fan. The base plate comes with pre-applied thermal grease for direct contact with the CPU.

Dynatron C2 CPU Cooler, top-down view

1 pav.: Iš ​​viršaus į apačią view of the Dynatron C2 CPU Cooler, showing the heatsink fins and integrated fan.

Dynatron C2 CPU Cooler, side view with heat pipes

2 pav.: šonas view of the Dynatron C2 CPU Cooler, highlighting the copper heat pipes extending from the base.

Dynatron C2 CPU Cooler, bottom view with thermal grease

3 pav. Apačia view of the Dynatron C2 CPU Cooler, showing the contact plate with pre-applied thermal grease.

5. Specifikacijos

FunkcijaSpecifikacija
CPU palaikymasIntel
CPU lizdasLGA 7529
Sprendimas2U and Up
Matmenys (I x P x A)132.5 x 97.8 x 67 mm (5.22 colio ilgio x 3.85 colio pločio x 2.64 colio aukščio)
Svoris630 g (1.39 svaro)
MedžiagaAluminum Stacked-fin with Heat Pipes (Copper)
Ventiliatoriaus matmenys60 x 60 x 25 mm
Fan Speed (PWM)20% Duty Cycle: 2300 ± 200 RPM
50% Duty Cycle: 5400 ± 10% RPM
100% Duty Cycle: 11000 ± 10% RPM
Įvertintas ttage12V DC
Guolio tipas2 rutulinis guolis
Energijos suvartojimas20% Duty Cycle: 0.84 W
50% Duty Cycle: 2.76 W
100% Duty Cycle: 18 W
Oro srautas20% Duty Cycle: 11.91 CFM
50% Duty Cycle: 28.38 CFM
100% Duty Cycle: 58.31 CFM
Triukšmo lygis20% Duty Cycle: 25.8 dBA
50% Duty Cycle: 44.4 dBA
100% Duty Cycle: 59.8 dBA
Oro slėgis20% Duty Cycle: 1.48 mm-H2O
50% Duty Cycle: 7.54 mm-H2O
100% Duty Cycle: 28.8 mm-H2O
Lead Wire Pin OutPin#1- Black(-), Pin#2- Yellow(+), Pin#3- Green(Tachometer/ Signal Output), Pin#4- Blue (PWM)
Terminis tepalasShin-Etsu 7762 (Pre-applied)

6. Sąranka ir diegimas

The Dynatron C2 cooler is designed for easy installation on Intel LGA 7529 sockets, featuring a convenient heat sink screw captive mounting system and pre-applied thermal grease.

Diegimo žingsniai:

  1. Paruoškite procesoriaus lizdą: Ensure the Intel LGA 7529 socket on your motherboard is clean and free of debris.
  2. Padėkite aušintuvą: Carefully align the Dynatron C2 cooler over the CPU, ensuring the mounting holes on the cooler's base align with the screw posts around the CPU socket. The cooler's base has pre-applied thermal grease (Shin-Etsu 7762), so no additional application is needed.
  3. Pritvirtinkite aušintuvą: Using a screwdriver, tighten the captive screws on the cooler's mounting brackets in a diagonal pattern (e.g., top-left, bottom-right, top-right, bottom-left). Tighten gradually and evenly until the cooler is firmly seated and stable. Do not overtighten.
  4. Prijunkite ventiliatorių: Locate the 4-pin fan connector on the Dynatron C2 cooler. Connect this cable to the designated CPU_FAN header on your motherboard. Ensure the connector is fully seated.
LGA 7529 mounting frame

4 pav. Pvzample of a mounting frame for LGA 7529 socket (actual frame may vary or be integrated).

7. Operacija

Once installed and connected, the Dynatron C2 CPU cooler operates automatically. The 60x60x25mm fan features a PWM (Pulse Width Modulation) function, allowing the motherboard to dynamically adjust fan speed based on CPU temperature. This ensures efficient cooling while minimizing noise during lighter workloads.

The fan operates at speeds ranging from approximately 2300 RPM (at 20% duty cycle) to 11000 RPM (at 100% duty cycle), providing robust airflow as needed to dissipate heat from the CPU.

8. Priežiūra

To ensure optimal performance and longevity of your Dynatron C2 CPU cooler, periodic maintenance is recommended.

  • Dulkių šalinimas: Regularly inspect the cooler for dust accumulation on the fan blades and heatsink fins. Dust can impede airflow and reduce cooling efficiency. Use compressed air or a soft brush to gently remove dust. Ensure the system is powered off and unplugged before cleaning.
  • Ventiliatoriaus patikrinimas: Periodically check that the fan spins freely and quietly. If unusual noises occur, inspect for obstructions or signs of wear.
  • Jokio išmontavimo: Do not attempt to disassemble the fan or heatsink assembly beyond routine cleaning. Unauthorized disassembly may void your warranty.

9. Problemų sprendimas

If you encounter issues with your Dynatron C2 CPU cooler, refer to the following common problems and solutions:

  • Issue: High CPU Temperatures
    Sprendimas: Verify that the cooler is securely mounted to the CPU and that all captive screws are tightened evenly. Check the fan connection to the motherboard's CPU_FAN header. Ensure adequate airflow within the computer chassis and that no cables or components are obstructing the cooler's fan.
  • Issue: Fan Not Spinning or Making Unusual Noise
    Sprendimas: Check the 4-pin fan cable connection to the motherboard. Power off the system and inspect the fan for any physical obstructions (e.g., loose wires). If the fan is faulty or damaged, contact Dynatron support or your reseller for assistance.

10. Garantija ir palaikymas

For warranty information, technical support, and service inquiries regarding your Dynatron C2 Intel 7529 2U Active CPU Cooler, please refer to the official Dynatron website or contact your authorized reseller. It is recommended to retain your purchase receipt as proof of purchase for any warranty claims.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.