BN-LINK Countdown Timer Switch (Model CP-U211C) User Manual

Įvadas

Thank you for choosing the BN-LINK Countdown Timer Switch (Model CP-U211C). This device is designed to provide convenient, energy-saving control for your exhaust fans, bathroom fans, and various lighting types. By automating shut-off operations, it helps reduce energy consumption and improve convenience in your home or office.

Please read this manual thoroughly before installation and operation to ensure proper use and safety.

Svarbi saugos informacija

ĮSPĖJIMAS: ELEKTROS SMŪGIO PAVOJUS.

• Montavimą turi atlikti kvalifikuotas elektrikas arba asmuo, puikiai išmanantis elektros instaliaciją ir sistemas.
• Always turn off power at the circuit breaker or fuse box before installing or servicing the switch.
• This device requires a neutral wire for operation. If your existing switch box does not have a neutral wire, consult a qualified electrician.
• For single-pole applications only. Do not use with 3-way or multi-way switches.
• Įsitikinkite, kad visos laidų jungtys yra tvirtos ir tinkamai izoliuotos.
• Neviršykite maksimalių prietaiso elektros vardinių verčių.
• Veiklos ttage: 125V, 60 Hz.
• Current Rating: 15A/1875W Resistive or General Purpose, 10A/1250W Ballast or Tungsten, ½ HP, TV-5.

Sąranka ir diegimas

This section provides instructions for installing your BN-LINK Countdown Timer Switch. Ensure power is OFF before proceeding.

Pakuotės turinys:

• BN-LINK Countdown Timer Switch
• Sieninė plokštė
• Tvirtinimo varžtai
• Vielos veržlės

Reikalingi įrankiai (neįtraukta):

• Atsuktuvas (Phillips ir Flathead)
• Vielos nuėmikliai
• Elektrinė juosta
• ttage testeris

Diegimo žingsniai:

1. Išjungti maitinimą: Suraskite keičiamą jungiklį valdantį grandinės pertraukiklį ir išjunkite jį. Patikrinkite, ar maitinimas išjungtas, naudodami įtampos matuoklį.tage testeris.
2. Seno jungiklio pašalinimas: Carefully remove the existing wall plate and unscrew the old switch from the wall box. Disconnect the wires from the old switch, noting which wire was connected to which terminal.
3. Identifikuokite laidus: Identify the following wires in your wall box:
   • Karšta viela (linija): Paprastai juoda, maitinama iš grandinės pertraukiklio.
   • Įkrovimo laidas: Typically black, sends power to the light/fan.
   • Neutralus laidas: Typically white. A neutral wire is REQUIRED for this switch.
   • Žemės viela: Typically green or bare copper.
4. Prijunkite naują jungiklį: Connect the wires from your wall box to the BN-LINK timer switch using the provided wire nuts. Refer to the wiring diagram below.
   • Prijunkite Juoda viela from the timer switch to the Hot Wire (Line) from the wall box.
   • Prijunkite Raudona viela from the timer switch to the Apkrovos laidas from the wall box.
   • Prijunkite Baltoji viela from the timer switch to the Neutralus laidas from the wall box.
   • Prijunkite Žalioji viela from the timer switch to the Žemės viela from the wall box.
5. Pritvirtinkite jungiklį: Carefully fold the wires and push the timer switch into the wall box. Secure it with the mounting screws.
6. Įdiekite sieninę plokštę: Attach the provided wall plate over the switch.
7. Atkurti maitinimą: Įjunkite maitinimą grandinės pertraukikliu.
8. Bandomoji operacija: Test the timer switch to ensure it functions correctly.

Vaizdas: Wiring diagram for the BN-LINK Countdown Timer Switch. This diagram illustrates the connection points for the ground wire (green), load wire (red), hot wire (black), and neutral wire (white) to the timer switch. A clear warning states "Neutral Wire Must Required."

Naudojimo instrukcijos

The BN-LINK Countdown Timer Switch features intuitive touch controls for easy operation.

Vaizdas: Priekyje view of the BN-LINK Countdown Timer Switch, highlighting the "Touch ON/OFF Button" at the top and the six "Touch to select time" buttons (1 Min, 5 Min, 10 Min, 20 Min, 30 Min, 1 Hour). LED indicators are also shown, indicating which countdown is active.

Mygtukų funkcijos:

• Power Button (Top): This is the main ON/OFF button.
  • Press once to turn the connected device (light/fan) ON indefinitely.
  • Press again to turn the connected device OFF.
  • This button can also override any active countdown timer, turning the device OFF immediately.
• Countdown Timer Buttons (1 Min, 5 Min, 10 Min, 20 Min, 30 Min, 1 Hour): These buttons activate a preset countdown.
  • Press any of these buttons to turn the connected device ON for the selected duration.
  • The device will automatically turn OFF once the countdown expires.
  • An LED indicator next to the selected time will illuminate to show the active countdown.

Example Naudojimas:

To turn on your bathroom fan for 10 minutes, simply press the "10 Min" button. The fan will run for 10 minutes and then automatically shut off. If you need to turn it off sooner, press the top Power button.

Universalios programos

The BN-LINK Countdown Timer Switch is suitable for a wide range of applications, enhancing convenience and energy efficiency in various areas of your home or business.

Vaizdas: A collage of four images demonstrating common applications for the timer switch: a bathroom, a closet, a laundry room, and a garage. This illustrates the versatility of the product in different environments.

• Vonios kambariai: Control exhaust fans to reduce humidity and prevent mold growth.
• Closets & Pantries: Automatically turn off lights after a set time, preventing wasted energy.
• Garažai: Manage lighting or ventilation systems.
• Skalbyklos: Control exhaust fans or lighting.
• Spas & Enclosed Patios: Conveniently manage lighting or small ventilation units.

This timer switch is compatible with incandescent, fluorescent, and LED lighting, as well as bathroom exhaust fans and heaters within its specified electrical ratings.

Priežiūra

The BN-LINK Countdown Timer Switch requires minimal maintenance.

• Valymas: Norėdami nuvalyti jungiklio paviršių, švelniai nuvalykite jį minkšta šluosteamp šluoste. Nenaudokite abrazyvinių valiklių, tirpiklių ar stiprių cheminių medžiagų, nes jos gali pažeisti apdailą ar vidinius komponentus.
• Patikra: Periodically inspect the switch and wall plate for any signs of damage or loose connections. If any issues are found, turn off power at the circuit breaker and consult a qualified electrician.
• Nėra vartotojo aptarnaujamų dalių: There are no user-serviceable parts inside the switch. Do not attempt to open or repair the unit yourself.

Trikčių šalinimas

If you encounter problems not listed here or if the suggested solutions do not resolve the issue, please contact BN-LINK Customer Support.

Specifikacijos

Vaizdas: Detailed dimensions of the BN-LINK Countdown Timer Switch and its accompanying wall plate. The image shows the height (5 inches for plate, 2.76 inches for switch body), width (3.3 inches for plate, 1.57 inches for switch body), and depth (1.73 inches for switch body).

Garantija ir palaikymas

BN-LINK products are designed to meet high-quality standards. For warranty information or technical support, please contact BN-LINK customer service.

Please have your model number (CP-U211C) and purchase date available when contacting support.

Kontaktinė informacija:

• Refer to the BN-LINK official webNaujausią kontaktinę informaciją rasite svetainėje arba produkto pakuotėje.
• Online support may be available through the BN-LINK brand store on Amazon or their official websvetainę.