Nr
Vartotojo vadovas
2 vnt. pakaitinių lempučių, suderinamų su „Satco A3662 60W 130V“ - EB4
Įvadas
This manual provides essential information for the safe and effective use of your new replacement bulbs. Please read this manual thoroughly before installation and retain it for future reference.
These bulbs are designed as a direct replacement for Satco A3662 bulbs, offering 60W power at 130V.
Produktas baigtasview
Image: A clear, flame-tip light bulb with a standard screw base. This bulb is designed for general illumination purposes.
The product consists of two replacement bulbs, specifically designed to be compatible with Satco A3662 models. They feature a CA10 bulb shape and operate at 60 watts and 130 volts, providing reliable illumination.
Sąranka ir diegimas
- Pirmiausia sauga: Before attempting installation, ensure the power supply to the fixture is turned off at the circuit breaker or fuse box.
- Leisti aušinti: If replacing an existing bulb, allow the old bulb to cool completely before handling to prevent burns.
- Pašalinti seną lemputę: Atsargiai atsukite seną lemputę iš lizdo, sukdami ją prieš laikrodžio rodyklę.
- Įdėkite naują lemputę: Gently screw the new replacement bulb into the socket by turning it clockwise until it is snug. Do not overtighten.
- Atkurti maitinimą: Once the new bulb is securely installed, restore power to the fixture.
- Testas: Įjunkite šviesos jungiklį, kad įsitikintumėte, jog lemputė veikia tinkamai.
Pastaba: Always handle light bulbs by their base to avoid transferring oils from your skin to the glass, which can reduce bulb life.
Naudojimo instrukcijos
These bulbs are designed for standard on/off operation via a light switch. They do not require any special operating procedures beyond typical light bulb usage.
- Ensure the bulb is installed in a compatible fixture with the correct voltage (130 V).
- The bulbs are rated for 60W. Do not exceed the maximum wattage rating of your light fixture.
- These bulbs are suitable for indoor use.
Priežiūra
These replacement bulbs are designed for minimal maintenance. Follow these guidelines to ensure optimal performance and longevity:
- Valymas: Before cleaning, ensure the power is off and the bulb is cool. Wipe the bulb gently with a soft, dry cloth. Do not use liquid cleaners or abrasive materials.
- Pakeitimas: Replace bulbs when they burn out. The average life of these bulbs is approximately 5000 hours.
- Saugykla: Store unused bulbs in their original packaging in a cool, dry place to protect them from damage.
Trikčių šalinimas
| Problema | Galima priežastis | Sprendimas |
|---|---|---|
| Lemputė neužsidega. | Armatūrai nėra energijos. Lemputė netinkamai įsukta. Lemputė pasibaigė. | Patikrinkite grandinės pertraukiklį / saugiklį. Įsitikinkite, kad lemputė tvirtai priveržta. Pakeiskite lemputę nauja. |
| Lemputės mirgėjimas. | Laisvas ryšys. Nesuderinamas pritemdymo jungiklis (jei taikoma). | Priveržkite lemputę į lizdą. Ensure fixture is not on a dimmer if bulb is non-dimmable. |
| Lemputė greitai perdega. | Per didelis ttage. Dažnas įjungimas/išjungimas cikliškai. Poor ventilation in fixture. | Patikrinkite armatūros tūrįtage. Reduce frequency of switching. Ensure adequate airflow around bulb. |
Specifikacijos
| Atributas | Vertė |
|---|---|
| Produkto tipas | Lemputė keičiama |
| Suderinamumas | Satco A3662 |
| Vattage | 60W |
| ttage | 130 V |
| Lemputės forma | CA10 |
| Vidutinis gyvenimas | 5000 valandų |
| Būklė | Nauja |
| Lemputės pagrindas | Flanšinis |
| Naudojimas viduje / lauke | Vidinis |
Garantija ir palaikymas
Information regarding specific warranty terms for this product is not provided in the available data. For any product support or warranty inquiries, please contact the seller or manufacturer directly through the platform where the purchase was made.
Gamintojas: Bendras
ASIN: B0CX8MSH8W
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.