Svarbios saugos instrukcijos
Please read all instructions carefully before using the Polti Coffea P10S machine. Keep this manual for future reference.
- Įsitikinkite, kad įrenginys prijungtas prie įžeminto maitinimo lizdo su tinkamu įtampos lygiutage.
- Nemerkite aparato, maitinimo laido ar kištuko į vandenį ar kitus skysčius.
- Prietaisą laikykite vaikams nepasiekiamoje vietoje.
- Surfaces can become hot during operation. Avoid contact with hot parts.
- Prieš valydami ir kai nenaudojate, atjunkite prietaisą nuo elektros lizdo.
- Nenaudokite prietaiso su pažeistu laidu ar kištuku arba jei prietaisas veikia netinkamai arba yra kaip nors kitaip pažeistas.
- Naudokite tik originalius priedus ir atsargines dalis.
Produktas baigtasview
The Polti Coffea P10S is a manual espresso and cappuccino machine designed for both ground coffee and E.S.E. 44mm pods. It features a Steamymilk frother for milk-based beverages and a removable water tank for easy refilling.
Image: The Polti Coffea P10S espresso machine shown with its portafilter, measuring spoon/tamper, and three filter baskets.
Įtraukti komponentai:
- Mašinos korpusas
- Portafilteris
- Combined measuring spoon and tamper accessory
- 3 Coffee Filters (1-cup, 2-cup, and E.S.E. pod filter)
- Steamymilk Milk Frother
Sąranka
1. Išpakavimas
- Atsargiai išimkite iš dėžutės visas pakavimo medžiagas ir priedus.
- Pastatykite mašiną ant stabilaus, lygaus, karščiui atsparaus paviršiaus.
2. Pradinis valymas
- Wash the water tank, portafilter, filter baskets, and drip tray with warm water and a mild detergent. Rinse thoroughly and dry.
- Nuvalykite mašinos išorę skelbimuamp audinys.
3. Vandens bako užpildymas
Image: A hand removing the transparent 1.3L water tank from the back of the Polti Coffea P10S machine.
- Remove the 1.3L removable water tank from the back of the machine.
- Fill the tank with fresh, cold tap water up to the 'MAX' level indicated.
- Įstatykite vandens bakelį atgal į jo vietą, užtikrindami, kad jis būtų tvirtai pritvirtintas.
4. Pirmasis naudojimas / Gruntavimas
- Įsitikinkite, kad vandens bakas yra užpildytas.
- Padėkite puodelį po kavos snapeliu.
- Turn the machine ON using the power button. The indicator lights will flash as the machine heats up.
- Once the lights are steady, press the 1-cup button to dispense water without coffee. Repeat this process 2-3 times to prime the pump and rinse the internal circuits.
Naudojimo instrukcijos
1. Preparing Espresso with Ground Coffee
Image: A hand pressing ground coffee into the portafilter using the tamper accessory.
- Insert the desired filter basket (1-cup or 2-cup) into the portafilter.
- Add finely ground coffee to the filter basket. Use the measuring spoon for accurate dosing.
- Naudokite tamper to press the coffee firmly and evenly. Wipe any excess coffee from the rim.
- Attach the portafilter to the group head by aligning it and turning it to the right until it is secure.
- Padėkite espreso puodelį (-ius) po portafiltro snapeliais.
- Once the machine is heated (steady lights), press the 1-cup or 2-cup button to start brewing.
- Aparatas automatiškai sustos, kai bus pasiektas užprogramuotas tūris.
2. Preparing Espresso with E.S.E. Pods
Image: A hand placing an E.S.E. (Easy Serving Espresso) pod into the designated filter basket within the portafilter.
- Insert the E.S.E. pod filter basket into the portafilter.
- Place one E.S.E. 44mm pod into the filter basket, ensuring it is centered.
- Attach the portafilter to the group head by aligning it and turning it to the right until it is secure.
- Place your espresso cup under the portafilter spout.
- Once the machine is heated, press the 1-cup button to start brewing.
- Aparatas automatiškai sustos, kai bus pasiektas užprogramuotas tūris.
3. Using the Steamymilk Frother
Image: The Steamymilk frother nozzle immersed in a metal pitcher, steaming milk to create foam.
- Fill a pitcher with cold milk (dairy or non-dairy). Do not fill more than one-third of the pitcher.
- Press the 'STEAM' button on the control panel. The light will flash and then become steady when the machine reaches steaming temperature.
- Position the Steamymilk frother nozzle just below the surface of the milk.
- Turn the steam control knob on the side of the machine counter-clockwise to release steam.
- Move the pitcher up and down gently to create foam. Once desired foam and temperature are reached, turn the steam control knob clockwise to close.
- Nedelsdami išvalykite garų antgalį su skelbimuamp šluostę, kad pieno likučiai neišdžiūtų.
4. Adjusting Coffee Volume
Vaizdas: Stambus planas view of the Polti Coffea P10S control panel, showing the power, 1-cup, 2-cup, and steam buttons.
- To program the 1-cup volume: With the machine heated, press and hold the 1-cup button. Release the button when the desired amount of coffee has been dispensed. The new volume is now saved.
- To program the 2-cup volume: With the machine heated, press and hold the 2-cup button. Release the button when the desired amount of coffee has been dispensed. The new volume is now saved.
Priežiūra
1. Kasdienis valymas
- After each use, remove and empty the portafilter. Rinse it and the filter basket under running water.
- Empty and clean the drip tray and grid.
- Nuvalykite mašinos išorę minkšta, damp audinys.
- After frothing milk, immediately wipe the Steamymilk frother with a damp cloth to remove milk residue. Run a short burst of steam to clear the nozzle.
2. Vandens bako valymas
- Clean the water tank weekly with warm water and a mild detergent. Rinse thoroughly to remove any soap residue.
3. Nukalkinimas
Reguliarus nukalkinimas yra būtinas norint išlaikyti tinkamą aparato veikimą ir pailginti jo tarnavimo laiką. Nukalkinimo dažnumas priklauso nuo vandens kietumo ir naudojimo.
- Naudokite tinkamą nukalkinimo tirpalą, specialiai sukurtą kavos aparatams.
- Vadovaukitės nukalkinimo tirpalo instrukcijomis.
- Typically, this involves mixing the solution with water in the tank, running it through the machine, and then rinsing with several tanks of fresh water.
4. Sandėliavimas
- If storing the machine for an extended period, ensure it is clean and dry.
- Ištuštinkite vandens bakelį ir lašų surinkimo padėklą.
- Laikyti vėsioje, sausoje vietoje, toliau nuo tiesioginių saulės spindulių.
Trikčių šalinimas
| Problema | Galima priežastis | Sprendimas |
|---|---|---|
| Neišleidžiama kava | Water tank empty; Machine not primed; Clogged filter/spout | Fill water tank; Prime the machine; Clean portafilter/spout. |
| Kava per silpna/vandeninga | Kava per rupi; Nepakankamai kavos; Nepakankamai tirštosamping | Naudokite smulkesnį malimą; Padidinkite kavos dozę; Tamp tvirčiau. |
| Kava per stipri / per lėtai teka | Coffee too fine; Too much coffee; Excessive tamping | Use coarser grind; Reduce coffee dose; Tamp mažiau tvirtai. |
| Garų vamzdelis negamina garų | Not heated to steam temperature; Clogged nozzle | Wait for 'STEAM' light to be steady; Clean steam nozzle. |
| Mašina praleidžia vandenį | Water tank not seated correctly; Seal issues | Ensure water tank is properly inserted; Contact support if issue persists. |
Specifikacijos
| Funkcija | Detalė |
|---|---|
| Modelio numeris | P10S |
| Matmenys (I x P x A) | 30.5 x 13 x 30.5 cm |
| Svoris | 3.25 kilogramo |
| Prekės ženklas | Polti |
| Talpa | 1.3 litrai (vandens bakas) |
| Ypatingos savybės | Automatic shut-off, Milk frother (Steamymilk), Removable water tank |
| Kavos virimo aparato tipas | Espreso aparatas |
| Medžiaga | Plastic, Metal, Aluminum, Stainless Steel |
| Veikimo režimas | vadovas |
| Galia | 1450 vatų |
| ttage | 230 V |
| Kavos rūšių suderinamumas | Ground coffee and E.S.E. 44mm pods |
| Filtro tipas | Daugkartinio naudojimo |
| Automatinis išjungimas | Po 25 minučių neveikimo |
Garantija ir palaikymas
The Polti Coffea P10S machine comes with a manufacturer's warranty. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Polti websvetainę.
For technical assistance, spare parts, or any questions regarding your machine, please contact Polti customer support through their official channels. Keep your proof of purchase handy when contacting support.