Speedlink SL-810008-BK

Speedlink TOKEN RGB Gaming Stereo Speaker

Modelis: SL-810008-BK

Vartotojo vadovas

1. Įvadas

The Speedlink TOKEN RGB Gaming Stereo Speaker system delivers powerful stereo sound combined with dynamic RGB lighting, enhancing your gaming and multimedia experience. Designed for versatility, it offers both wired and wireless connectivity options, making it suitable for various devices including PCs, laptops, tablets, and smartphones.

This manual provides detailed instructions on setting up, operating, and maintaining your Speedlink TOKEN speakers to ensure optimal performance and longevity.

Speedlink TOKEN RGB Gaming Stereo Speakers with wired remote control.

Image 1: Speedlink TOKEN RGB Gaming Stereo Speakers with wired remote control.

2. Pakuotės turinys

Patikrinkite pakuotę, ar joje yra šie daiktai:

  • 2 x Speedlink TOKEN RGB Stereo Speakers
  • Integrated Wired Remote Control (attached to speakers)
  • USB-A Power Cable (integrated)
  • 3.5 mm lizdo garso kabelis (integruotas)

3. Sąranka

3.1 Fizinis ryšys

  1. Padėties nustatymas: Place the two speaker units on either side of your monitor or desired listening area. The cable length between satellites is 1.2 meters (2x0.6m), providing flexibility for optimal stereo separation.
  2. Maitinimo jungtis: Connect the integrated USB-A cable to an available USB port on your computer, laptop, or a USB power adapter (not included). The speakers are powered via USB.
  3. Diagram indicating the Speedlink TOKEN speakers are USB powered, showing a USB-A connector.

    Image 2: USB Power Connection.

  4. Garso jungtis:
    • 3.5 mm lizdas: For wired audio, connect the integrated 3.5mm audio jack to the audio output port (headphone jack) of your computer, laptop, tablet, or smartphone.
    • Bluetooth: For wireless audio, ensure the speakers are powered on. The speakers will automatically enter Bluetooth pairing mode if no 3.5mm connection is detected or selected.
Diagram illustrating the Speedlink TOKEN speakers' audio modes: Bluetooth for smartphone and tablet, and 3.5mm jack connection.

Image 3: Audio Connection Options (Bluetooth and 3.5mm Jack).

4. Naudojimo instrukcijos

The Speedlink TOKEN speakers are controlled via the integrated wired remote control.

Close-up of the Speedlink TOKEN wired remote control, showing volume slider, power button, and lighting mode button.

Image 4: Wired Remote Control.

4.1 Įjungimas / išjungimas ir garsumo valdymas

  • Galia: Use the dedicated power button on the wired remote to turn the speakers on or off.
  • Apimtis: Adjust the volume using the rotary dial or slider on the wired remote.

4.2 Switching Audio Input (Jack / Bluetooth)

The wired remote control features a button to switch between the 3.5mm jack input and Bluetooth input. Press this button to toggle between the two modes.

4.3 Bluetooth poravimas

  1. Ensure the speakers are powered on and the Bluetooth input mode is selected (indicated by an LED on the remote).
  2. „Bluetooth“ palaikančioje įrangoje (išmaniajame telefone, planšetiniame kompiuteryje, nešiojamajame kompiuteryje) eikite į „Bluetooth“ nustatymus.
  3. Ieškokite available devices. The speakers should appear as "Speedlink TOKEN" or similar.
  4. Select the speakers to pair. Once paired, the Bluetooth indicator on the remote will stabilize, and you can play audio wirelessly.

4.4 RGB apšvietimo režimai

The Speedlink TOKEN speakers feature six different RGB lighting modes, including a music-reactive mode. Use the dedicated lighting button on the wired remote to cycle through the modes or to turn the lighting off.

  • Press the lighting button repeatedly to switch between the available RGB effects.
  • One of the modes is a dynamic RGB effect that reacts to the music/sound being played.
  • To deactivate the lighting, continue pressing the button until the lights turn off.

Note: The lighting settings may not be retained after the speakers are powered off or disconnected from power. You may need to re-select your preferred lighting mode upon restart.

5. Priežiūra

Tinkama priežiūra užtikrina garsiakalbių ilgaamžiškumą ir našumą.

  • Valymas: Use a soft, dry cloth to wipe the speaker surfaces. Do not use abrasive cleaners, solvents, or strong chemicals, as these can damage the finish.
  • Dulkės: Regularly remove dust from the speaker grilles using a soft brush or compressed air.
  • Skysčio ekspozicija: Avoid exposing the speakers to liquids. They are not waterproof.
  • Saugykla: Kai garsiakalbių nenaudojate ilgesnį laiką, laikykite juos vėsioje, sausoje vietoje, toliau nuo tiesioginių saulės spindulių ir ekstremalių temperatūrų.

6. Problemų sprendimas

If you encounter issues with your Speedlink TOKEN speakers, please refer to the following common problems and solutions:

Problema Galima priežastis Sprendimas
Nėra garso iš garsiakalbių.
  • Garsiakalbiai neįjungti.
  • Garsas per mažas.
  • Pasirinkta neteisinga garso įvestis.
  • Garso kabelis nėra iki galo prijungtas.
  • Device volume is muted or low.
  • Ensure speakers are powered on via the remote.
  • Increase volume on the wired remote and your device.
  • Press the input selection button on the remote to switch between Jack and Bluetooth.
  • Ensure the 3.5mm jack is fully inserted into both the speaker remote and your device.
  • Patikrinkite prijungto įrenginio garso nustatymus.
Bluetooth connection is unstable or drops out.
  • Trikdžiai iš kitų įrenginių.
  • Device is too far from speakers.
  • Bluetooth driver issues on device.
  • Move speakers closer to the Bluetooth device (within 10 meters).
  • Minimize other wireless devices operating nearby.
  • Try unpairing and re-pairing the speakers.
  • Restart both the speakers and your Bluetooth device.
  • Consider using the 3.5mm jack for a stable wired connection if Bluetooth issues persist.
RGB lighting settings reset after power cycle.
  • This is expected behavior for this model.
  • Re-select your desired RGB lighting mode using the lighting button on the remote each time the speakers are powered on.
Speakers are powered on but no RGB lighting.
  • Apšvietimas išjungtas.
  • Press the lighting button on the remote to cycle through modes until lights appear.

7. Specifikacijos

Funkcija Detalė
Modelio pavadinimas TOKEN RGB Gaming Speaker
Modelio numeris SL-810008-BK
Prekės ženklas Speedlink
Ryšio technologija Auxiliary (3.5mm Jack), Bluetooth
Garsiakalbio tipas Multimedija
Garso išvesties režimas Stereo
Erdvinio garso kanalo konfigūracija 2.0
Maksimali garsiakalbio išvesties galia 12 vatų
Varža 4 omai
Dažnio atsakas 20000 KHz
Valdiklio tipas Nuotolinio valdymo pultas (laidinis)
Ypatingos savybės Bluetooth, LED Light, RGB
Gaminio matmenys (I x P x A) 8.5 x 8.1 x 16.2 cm (3.35 x 3.19 x 6.38 colio)
Prekės svoris 700 gramų (1.54 svaro)
USB/Jack Cable Length 1.2 metrų (3.94 pėdos)
Cable Length Between Satellites 1.2 meters (2x0.6m) (3.94 feet)
Maitinimo šaltinis USB-A
Medžiaga Plastikiniai
Spalva Juoda

8. Garantija ir palaikymas

8.1 Gamintojo garantija

The Speedlink TOKEN RGB Gaming Stereo Speaker comes with a 2 metų gamintojo garantijaŠi garantija taikoma medžiagų ir gamybos defektams, atsiradusiems įprasto naudojimo sąlygomis. Išsaugokite pirkimo įrodymą, jei galėtumėte pateikti pretenzijas dėl garantijos.

Garantija netaikoma žalai, atsiradusiai dėl netinkamo naudojimo, nelaimingo atsitikimo, neleistinos modifikacijos ar išorinių priežasčių, tokių kaip įtampos šuoliai.

8.2 Pagalba klientams

For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please visit the official Speedlink website or contact their customer support. Refer to the product packaging or Speedlink's official websvetainė, kurioje rasite naujausią kontaktinę informaciją.

Websvetainė: www.speedlink.com

© 2025 Speedlink. Visos teisės saugomos.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.